feat(doc): update wifi sections for H2

docs/conf_common.py

@@ -60,7 +60,12 @@ BLUFI_DOCS = ['api-guides/blufi.rst',
 
 WIFI_DOCS = ['api-guides/wifi.rst',
              'api-guides/wifi-security.rst',
-             'api-guides/wireshark-user-guide.rst']
+             'api-guides/wireshark-user-guide.rst',
+             'api-reference/network/esp_nan.rst',
+             'api-reference/network/esp_now.rst',
+             'api-reference/network/esp_smartconfig.rst',
+             'api-reference/network/esp_wifi.rst',
+             'api-reference/network/esp_dpp.rst']
 
 WIFI_MESH_DOCS = ['api-guides/esp-wifi-mesh.rst',
                   'api-reference/network/esp-wifi-mesh.rst']

docs/docs_not_updated/esp32h2.txt

@@ -1,10 +1,7 @@
 api-guides/RF_calibration
 api-guides/coexist
-api-guides/wifi
-api-guides/esp-wifi-mesh
 api-guides/cplusplus
 api-guides/dfu
-api-guides/wifi-security
 api-guides/index
 api-reference/peripherals/i2s
 api-reference/peripherals/spi_features
@@ -14,11 +11,6 @@ api-reference/peripherals/dedic_gpio
 api-reference/peripherals/sd_pullup_requirements
 api-reference/peripherals/index
 api-reference/peripherals/sdmmc_host
-api-reference/network/esp_dpp
-api-reference/network/esp_now
-api-reference/network/esp-wifi-mesh
-api-reference/network/esp_smartconfig
-api-reference/network/esp_wifi
 api-reference/network/index
 api-reference/system/sleep_modes
 api-reference/system/power_management

docs/en/api-guides/partition-tables.rst

@@ -114,7 +114,11 @@ See enum :cpp:type:`esp_partition_subtype_t` for the full list of subtypes defin
   - ``nvs`` (2) is for the :doc:`Non-Volatile Storage (NVS) API <../api-reference/storage/nvs_flash>`.
 
     - NVS is used to store per-device PHY calibration data (different to initialisation data).
-    - NVS is used to store WiFi data if the :doc:`esp_wifi_set_storage(WIFI_STORAGE_FLASH) <../api-reference/network/esp_wifi>` initialisation function is used.
+
+    .. only:: SOC_WIFI_SUPPORTED
+
+        - NVS is used to store Wi-Fi data if the :doc:`esp_wifi_set_storage(WIFI_STORAGE_FLASH) <../api-reference/network/esp_wifi>` initialization function is used.
+
     - The NVS API can also be used for other application data.
     - It is strongly recommended that you include an NVS partition of at least 0x3000 bytes in your project.
     - If using NVS API to store a lot of data, increase the NVS partition size from the default 0x6000 bytes.

docs/en/api-reference/network/index.rst

@@ -3,20 +3,22 @@ Networking APIs
 
 :link_to_translation:`zh_CN:[中文]`
 
-Wi-Fi
-=====
+.. only:: SOC_WIFI_SUPPORTED
 
-.. toctree::
-    :maxdepth: 1
+   Wi-Fi
+   =====
 
-    esp_now
-    :SOC_WIFI_MESH_SUPPORT: esp-wifi-mesh
-    esp_smartconfig
-    esp_wifi
-    esp_dpp
-    esp_nan
+   .. toctree::
+      :maxdepth: 1
 
-Code examples for the Wi-Fi API are provided in the :example:`wifi` directory of ESP-IDF examples.
+      esp_now
+      :SOC_WIFI_MESH_SUPPORT: esp-wifi-mesh
+      esp_smartconfig
+      esp_wifi
+      esp_dpp
+      esp_nan
+
+   Code examples for the Wi-Fi API are provided in the :example:`wifi` directory of ESP-IDF examples.
 
 .. only:: SOC_WIFI_MESH_SUPPORT
 

docs/zh_CN/api-guides/partition-tables.rst

@@ -114,7 +114,11 @@ SubType 字段长度为 8 bit，内容与具体分区 Type 有关。目前，esp
    -  ``nvs`` (2) 是专门给 :doc:`非易失性存储 (NVS) API <../api-reference/storage/nvs_flash>` 使用的分区。
 
       -  用于存储每台设备的 PHY 校准数据（注意，并不是 PHY 初始化数据）。
-      -  用于存储 Wi-Fi 数据（如果使用了 :doc:`esp_wifi_set_storage(WIFI_STORAGE_FLASH) <../api-reference/network/esp_wifi>` 初始化函数）。
+
+      .. only:: SOC_WIFI_SUPPORTED
+
+          -  用于存储 Wi-Fi 数据（如果使用了 :doc:`esp_wifi_set_storage(WIFI_STORAGE_FLASH) <../api-reference/network/esp_wifi>` 初始化函数）。
+
       -  NVS API 还可以用于其他应用程序数据。
       -  强烈建议您应为 NVS 分区分配至少 0x3000 字节空间。
       -  如果使用 NVS API 存储大量数据，请增加 NVS 分区的大小（默认是 0x6000 字节）。

docs/zh_CN/api-reference/network/index.rst

@@ -3,20 +3,22 @@
 
 :link_to_translation:`en:[English]`
 
-Wi-Fi
-=====
+.. only:: SOC_WIFI_SUPPORTED
 
-.. toctree::
-   :maxdepth: 1
+   Wi-Fi
+   =====
 
-   esp_now
-   :SOC_WIFI_MESH_SUPPORT: esp-wifi-mesh
-   esp_smartconfig
-   esp_wifi
-   esp_dpp
-   esp_nan
+   .. toctree::
+      :maxdepth: 1
 
-本部分的 Wi-Fi API 示例代码存放在 ESP-IDF 示例项目的 :example:`wifi` 目录下。
+      esp_now
+      :SOC_WIFI_MESH_SUPPORT: esp-wifi-mesh
+      esp_smartconfig
+      esp_wifi
+      esp_dpp
+      esp_nan
+
+   本部分的 Wi-Fi API 示例代码存放在 ESP-IDF 示例项目的 :example:`wifi` 目录下。
 
 .. only:: SOC_WIFI_MESH_SUPPORT