refactor(sdio): place sdio slave driver into a new component

components/driver/CMakeLists.txt

@@ -15,7 +15,6 @@ set(includes "include"
              "ledc/include"
              "parlio/include"
              "rmt/include"
-             "sdio_slave/include"
              "sigma_delta/include"
              "temperature_sensor/include"
              "touch_sensor/include"
@@ -101,11 +100,6 @@ if(CONFIG_SOC_RMT_SUPPORTED)
     list(APPEND ldfragments "rmt/linker.lf")
 endif()
 
-# SDIO Slave related source files
-if(CONFIG_SOC_SDIO_SLAVE_SUPPORTED)
-    list(APPEND srcs "sdio_slave/sdio_slave.c")
-endif()
-
 # Sigma-Delta Modulation related source files
 if(CONFIG_SOC_SDM_SUPPORTED)
     list(APPEND srcs "sigma_delta/sdm.c"
@@ -164,7 +158,7 @@ else()
                            # for backward compatibility, the driver component needs to
                            # have a public dependency on other "esp_driver_foo" components
                                     esp_driver_gpio esp_driver_pcnt esp_driver_gptimer esp_driver_spi esp_driver_mcpwm
-                                    esp_driver_sdmmc esp_driver_sdspi esp_driver_ana_cmpr esp_driver_i2s
+                                    esp_driver_ana_cmpr esp_driver_i2s esp_driver_sdmmc esp_driver_sdspi esp_driver_sdio
                            LDFRAGMENTS ${ldfragments}
                           )
 endif()

components/driver/test_apps/.build-test-rules.yml

@@ -92,16 +92,6 @@ components/driver/test_apps/rs485:
       temporary: true
       reason: lack of runners
 
-components/driver/test_apps/sdio/sdio_common_tests/host_sdmmc:
-  enable:
-    - if: IDF_TARGET == "esp32"
-      temporary: false
-      reason: always use ESP32 SDMMC as host
-
-components/driver/test_apps/sdio/sdio_common_tests/sdio:
-  disable:
-    - if: SOC_SDIO_SLAVE_SUPPORTED != 1
-
 components/driver/test_apps/sigma_delta:
   disable:
     - if: SOC_SDM_SUPPORTED != 1

components/esp_driver_sdio/CMakeLists.txt

@@ -0,0 +1,13 @@
+set(srcs)
+
+set(public_include "include")
+
+# SDIO Slave related source files
+if(CONFIG_SOC_SDIO_SLAVE_SUPPORTED)
+    list(APPEND srcs "src/sdio_slave.c")
+endif()
+
+idf_component_register(SRCS ${srcs}
+                       INCLUDE_DIRS ${public_include}
+                       PRIV_REQUIRES esp_driver_gpio esp_ringbuf
+                      )

components/esp_driver_sdio/include/driver/sdio_slave.h

@@ -18,7 +18,6 @@ extern "C" {
 
 typedef void(*sdio_event_cb_t)(uint8_t event);
 
-
 /// Configuration of SDIO slave
 typedef struct {
     sdio_slave_timing_t timing;             ///< timing of sdio_slave. see `sdio_slave_timing_t`.
@@ -282,7 +281,6 @@ void sdio_slave_clear_host_int(sdio_slave_hostint_t mask);
  */
 esp_err_t sdio_slave_wait_int(int pos, TickType_t wait);
 
-
 #ifdef __cplusplus
 }
 #endif

components/esp_driver_sdio/src/sdio_slave.c

@@ -75,8 +75,6 @@ The driver of FIFOs works as below:
         driver also fix the STAILQ_NEXT pointer of the last descriptor so that the descriptors are now in a ring again.
 */
 
-
-
 #include <string.h>
 #include "driver/sdio_slave.h"
 #include "soc/sdio_slave_periph.h"
@@ -92,7 +90,6 @@ The driver of FIFOs works as below:
 #include "hal/sdio_slave_hal.h"
 #include "hal/gpio_hal.h"
 
-
 #define SDIO_SLAVE_CHECK(res, str, ret_val) do { if(!(res)){\
     SDIO_SLAVE_LOGE("%s", str);\
     return ret_val;\
@@ -103,7 +100,6 @@ static const char TAG[] = "sdio_slave";
 #define SDIO_SLAVE_LOGE(s, ...) ESP_LOGE(TAG, "%s(%d): "s, __FUNCTION__,__LINE__,##__VA_ARGS__)
 #define SDIO_SLAVE_LOGW(s, ...) ESP_LOGW(TAG, "%s: "s, __FUNCTION__,##__VA_ARGS__)
 
-
 // sdio_slave_buf_handle_t is of type recv_desc_t*;
 typedef struct recv_desc_s {
     union {
@@ -122,7 +118,6 @@ typedef struct recv_desc_s {
     };
 } recv_desc_t;
 
-
 typedef TAILQ_HEAD(recv_tailq_head_s, recv_desc_s) recv_tailq_t;
 
 typedef struct {

components/esp_driver_sdio/test_apps/.build-test-rules.yml

@@ -0,0 +1,17 @@
+components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc:
+  enable:
+    - if: IDF_TARGET == "esp32"
+      temporary: false
+      reason: always use ESP32 SDMMC as host
+  depends_components:
+    - sdmmc
+    - esp_driver_sdmmc
+    - esp_driver_sdio
+
+components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/sdio:
+  disable:
+    - if: SOC_SDIO_SLAVE_SUPPORTED != 1
+  depends_components:
+    - sdmmc
+    - esp_driver_sdmmc
+    - esp_driver_sdio

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc/main/test_app_main.c

@@ -14,7 +14,6 @@
 static size_t before_free_8bit;
 static size_t before_free_32bit;
 
-
 void setUp(void)
 {
     before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
@@ -46,7 +45,5 @@ void app_main(void)
     printf("/____/_____/___/\\____/   /____/_____/_/  /_/_/  /_/\\____/   \n");
     printf("                                                            \n");
 
-
-
     unity_run_menu();
 }

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc/main/test_sdio_sdhost.c

@@ -38,7 +38,6 @@ typedef struct {
     bool check_data;
 } test_sdio_param_t;
 
-
 /*---------------------------------------------------------------
                     Host Init Settings
 ---------------------------------------------------------------*/
@@ -91,7 +90,6 @@ static void s_send_finish_test(essl_handle_t handle)
     essl_send_slave_intr(handle, BIT(7), TEST_TIMEOUT_MAX);
 }
 
-
 /*---------------------------------------------------------------
                 Function Tests
 ---------------------------------------------------------------*/
@@ -132,8 +130,6 @@ TEST_CASE("SDIO_SDMMC: test interrupt", "[sdio]")
     sdmmc_host_deinit();
 }
 
-
-
 /*---------------------------------------------------------------
                 SDMMC_SDIO: test register
 ---------------------------------------------------------------*/
@@ -168,8 +164,6 @@ TEST_CASE("SDIO_SDMMC: test register", "[sdio]")
     sdmmc_host_deinit();
 }
 
-
-
 /*---------------------------------------------------------------
                 SDMMC_SDIO: test reset
 ---------------------------------------------------------------*/
@@ -213,7 +207,6 @@ TEST_CASE("SDIO_SDMMC: test reset", "[sdio]")
     sdmmc_host_deinit();
 }
 
-
 /*---------------------------------------------------------------
                 Transaction Tests
 ---------------------------------------------------------------*/
@@ -285,7 +278,6 @@ TEST_CASE("SDIO_SDMMC: test from host (Performance)", "[sdio_speed]")
     test_from_host(false);
 }
 
-
 static void test_to_host(bool check_data)
 {
     //prepare buffer
@@ -329,15 +321,15 @@ static void test_to_host(bool check_data)
             remain_length -= rcv_len;
         } while (remain_length > 0);
 
-        int64_t c_time_ms = ccomp_timer_stop()/1000;
+        int64_t c_time_ms = ccomp_timer_stop() / 1000;
         int64_t end_us = esp_timer_get_time();
 
-        uint32_t total_time_ms = (end_us - pre_us)/1000;
+        uint32_t total_time_ms = (end_us - pre_us) / 1000;
         ESP_LOGI(TAG, "test done, total time: %" PRIu32 " ms (%d ms compensated), bytes transferred: %"PRIu32, total_time_ms, (int)c_time_ms, expected_length);
 
         uint32_t throughput_byte_per_ms = expected_length / c_time_ms;
         ESP_LOGI(TAG, "Throughput: compensated %"PRIu32"KB/s %.2lf MB/s, typical %.2lf MB/s",
-                 throughput_byte_per_ms, throughput_byte_per_ms/1000., expected_length/(total_time_ms*1000.));
+                 throughput_byte_per_ms, throughput_byte_per_ms / 1000., expected_length / (total_time_ms * 1000.));
 
         esp_rom_delay_us(50 * 1000);
         s_send_finish_test(handle);

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/sdio/main/test_app_main.c

@@ -14,7 +14,6 @@
 static size_t before_free_8bit;
 static size_t before_free_32bit;
 
-
 void setUp(void)
 {
     before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/sdio/main/test_sdio_slave.c

@@ -25,7 +25,6 @@
 
 static const char *TAG = "test_sdio";
 
-
 /*---------------------------------------------------------------
                     Slave Init Settings
 ---------------------------------------------------------------*/
@@ -69,8 +68,6 @@ static void s_slave_init(sdio_slave_sending_mode_t mode)
     TEST_ESP_OK(sdio_slave_initialize(&slave_config));
 }
 
-
-#include "esp_rom_sys.h"
 /*---------------------------------------------------------------
                 Function Tests
 ---------------------------------------------------------------*/
@@ -141,7 +138,6 @@ TEST_CASE("SDIO_Slave: test reset", "[sdio]")
         TEST_ASSERT_EQUAL(i, arg);
     }
 
-
     WORD_ALIGNED_ATTR uint8_t host_tx_buffer[TEST_RESET_DATA_LEN] = {};
     for (int i = 0; i < TEST_RESET_BUF_NUMS; i++) {
         test_fill_random_to_buffer(i, host_tx_buffer, TEST_RESET_DATA_LEN);
@@ -159,7 +155,6 @@ TEST_CASE("SDIO_Slave: test reset", "[sdio]")
     sdio_slave_deinit();
 }
 
-
 /*---------------------------------------------------------------
                 Transaction Tests
 ---------------------------------------------------------------*/
@@ -178,7 +173,6 @@ static void test_from_host(bool check_data)
         TEST_ASSERT(slave_rx_buffer[i]);
     }
 
-
     for (int i = 0; i < TEST_TARNS_PARAM_NUMS; i++) {
         //slave init
         s_slave_init(SDIO_SLAVE_SEND_STREAM);
@@ -214,7 +208,6 @@ static void test_from_host(bool check_data)
             TEST_ESP_OK(sdio_slave_recv_load_buf(used_buf_handle));
         }
 
-
         wait_for_finish(&s_test_slv_ctx);
         sdio_slave_stop();
         sdio_slave_deinit();
@@ -226,7 +219,6 @@ static void test_from_host(bool check_data)
     test_destroy_buffer_pool();
 }
 
-
 TEST_CASE("SDIO_Slave: test from host", "[sdio]")
 {
     test_from_host(true);
@@ -237,7 +229,6 @@ TEST_CASE("SDIO_Slave: test from host (Performance)", "[sdio_speed]")
     test_from_host(false);
 }
 
-
 /*---------------------------------------------------------------
                 To Host Tests
 ---------------------------------------------------------------*/
@@ -262,7 +253,7 @@ static void test_to_host(void)
             do {
                 void* arg;
                 //when the queue is full, do a blocking wait for 10ms, otherwise non-blocking
-                err = sdio_slave_send_get_finished(&arg, QUEUE_FULL()? 1: 0);
+                err = sdio_slave_send_get_finished(&arg, QUEUE_FULL() ? 1 : 0);
                 if (err == ESP_OK) {
                     s_test_slv_ctx.queued_cnt --;
                     continue;
@@ -283,7 +274,6 @@ static void test_to_host(void)
             s_test_slv_ctx.queued_cnt--;
         }
 
-
         wait_for_finish(&s_test_slv_ctx);
         sdio_slave_stop();
         sdio_slave_deinit();

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/sdio_common_test.h

@@ -11,12 +11,10 @@
 #include <stdbool.h>
 #include "sdkconfig.h"
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-
 #define TEST_RX_BUFFER_SIZE           2048
 
 /*---------------------------------------------------------------

docs/doxygen/Doxyfile

@@ -88,16 +88,7 @@ INPUT = \
     $(PROJECT_PATH)/components/driver/rmt/include/driver/rmt_rx.h \
     $(PROJECT_PATH)/components/driver/rmt/include/driver/rmt_tx.h \
     $(PROJECT_PATH)/components/driver/rmt/include/driver/rmt_types.h \
-    $(PROJECT_PATH)/components/driver/sdio_slave/include/driver/sdio_slave.h \
     $(PROJECT_PATH)/components/driver/sigma_delta/include/driver/sdm.h \
-    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_default_configs.h \
-    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_host.h \
-    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_types.h \
-    $(PROJECT_PATH)/components/esp_driver_sdspi/include/driver/sdspi_host.h \
-    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_common.h \
-    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_master.h \
-    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave_hd.h \
-    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave.h \
     $(PROJECT_PATH)/components/driver/temperature_sensor/include/driver/temperature_sensor.h \
     $(PROJECT_PATH)/components/driver/touch_sensor/include/driver/touch_sensor_common.h \
     $(PROJECT_PATH)/components/driver/twai/include/driver/twai.h \
@@ -143,6 +134,15 @@ INPUT = \
     $(PROJECT_PATH)/components/esp_driver_i2s/include/driver/i2s_tdm.h \
     $(PROJECT_PATH)/components/esp_driver_i2s/include/driver/i2s_types.h \
     $(PROJECT_PATH)/components/esp_driver_pcnt/include/driver/pulse_cnt.h \
+    $(PROJECT_PATH)/components/esp_driver_sdio/include/driver/sdio_slave.h \
+    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_default_configs.h \
+    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_host.h \
+    $(PROJECT_PATH)/components/esp_driver_sdmmc/include/driver/sdmmc_types.h \
+    $(PROJECT_PATH)/components/esp_driver_sdspi/include/driver/sdspi_host.h \
+    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_common.h \
+    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_master.h \
+    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave_hd.h \
+    $(PROJECT_PATH)/components/esp_driver_spi/include/driver/spi_slave.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_com.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_driver.h \
     $(PROJECT_PATH)/components/esp_eth/include/esp_eth_mac.h \

docs/en/migration-guides/release-5.x/5.3/peripherals.rst

@@ -11,6 +11,8 @@ In order to control the dependence of other components on drivers at a smaller g
 - `esp_driver_spi` - Driver for GPSPI
 - `esp_driver_mcpwm` - Driver for Motor Control PWM
 - `esp_driver_sdmmc` - Driver for SDMMC
+- `esp_driver_sdspi` - Driver for SDSPI
+- `esp_driver_sdio` - Driver for SDIO
 - `esp_driver_ana_cmpr` - Driver for Analog Comparator
 - `esp_driver_i2s` - Driver for I2S
 

docs/zh_CN/migration-guides/release-5.x/5.3/peripherals.rst

@@ -11,6 +11,8 @@
 - `esp_driver_spi` - 通用 SPI 驱动
 - `esp_driver_mcpwm` - 电机控制 PWM 驱动
 - `esp_driver_sdmmc` - SDMMC 驱动
+- `esp_driver_sdspi` - SDSPI 驱动
+- `esp_driver_sdio` - SDIO 驱动
 - `esp_driver_ana_cmpr` - 模拟比较器驱动
 - `esp_driver_i2s` - I2S 驱动
 

examples/peripherals/.build-test-rules.yml

@@ -260,6 +260,8 @@ examples/peripherals/sdio/host:
     - if: IDF_TARGET != "esp32"
       temporary: true
       reason: lack of runners
+  depends_components:
+    - esp_driver_sdio
 
 examples/peripherals/sdio/slave:
   disable:
@@ -268,6 +270,8 @@ examples/peripherals/sdio/slave:
     - if: IDF_TARGET != "esp32"
       temporary: true
       reason: lack of runners
+  depends_components:
+    - esp_driver_sdio
 
 examples/peripherals/secure_element/atecc608_ecdsa:
   enable: