mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
Add information on compatibility issue between JTAG and AT firmware.
This commit is contained in:
parent
5bc644bbdf
commit
1d06b6b07e
@ -287,6 +287,7 @@ This section provides collection of links to all tips and quirks referred to fro
|
|||||||
* :ref:`jtag-debugging-tip-openocd-configure-target`
|
* :ref:`jtag-debugging-tip-openocd-configure-target`
|
||||||
* :ref:`jtag-debugging-tip-reset-by-debugger`
|
* :ref:`jtag-debugging-tip-reset-by-debugger`
|
||||||
* :ref:`jtag-debugging-tip-jtag-pins-reconfigured`
|
* :ref:`jtag-debugging-tip-jtag-pins-reconfigured`
|
||||||
|
* :ref:`jtag-debugging-tip-at-firmware-issue`
|
||||||
* :ref:`jtag-debugging-tip-reporting-issues`
|
* :ref:`jtag-debugging-tip-reporting-issues`
|
||||||
|
|
||||||
|
|
||||||
|
@ -235,6 +235,16 @@ Below is an excerpt from series of errors reported by GDB after the application
|
|||||||
cpu1: xtensa_resume (line 431): DSR (FFFFFFFF) indicates DIR instruction generated an overrun!
|
cpu1: xtensa_resume (line 431): DSR (FFFFFFFF) indicates DIR instruction generated an overrun!
|
||||||
|
|
||||||
|
|
||||||
|
.. _jtag-debugging-tip-at-firmware-issue:
|
||||||
|
|
||||||
|
JTAG and ESP32-WROOM-32 AT firmware Compatibility Issue
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
The ESP32-WROOM series of modules come pre-flashed with AT firmware. This firmware configures the pins GPIO12 to GPIO15 as SPI slave interface, which makes using JTAG impossible.
|
||||||
|
|
||||||
|
To make JTAG available, build new firmware that is not using pins GPIO12 to GPIO15 dedicated to JTAG communication. After that, flash the firmware onto your module. See also :ref:`jtag-debugging-tip-jtag-pins-reconfigured`.
|
||||||
|
|
||||||
|
|
||||||
.. _jtag-debugging-tip-reporting-issues:
|
.. _jtag-debugging-tip-reporting-issues:
|
||||||
|
|
||||||
Reporting issues with OpenOCD / GDB
|
Reporting issues with OpenOCD / GDB
|
||||||
|
Loading…
Reference in New Issue
Block a user