doc/remove_romconsole_since_it_is_no_longer_supported_from_ESP32_ECO3

docs/en/api-guides/index.rst

@@ -30,7 +30,6 @@ API Guides
     lwIP TCP/IP Stack <lwip>
     Partition Tables <partition-tables>
     :esp32: RF Calibration <RF_calibration>
-    :esp32: ROM debug console <romconsole>
     :esp32: Secure Boot <../security/secure-boot-v1>
     Secure Boot V2 <../security/secure-boot-v2>
     Thread Local Storage <thread-local-storage>

docs/en/api-guides/romconsole.rst

@@ -1,114 +0,0 @@
-*****************************
-{IDF_TARGET_NAME} ROM console
-*****************************
-
-When an {IDF_TARGET_NAME} is unable to boot from flash ROM (and the fuse disabling it hasn't been blown), it boots into a rom console. The console
-is based on TinyBasic, and statements entered should be in the form of BASIC statements. As is common in the BASIC language, without a
-preceeding line number, commands entered are executed immediately; lines with a prefixed line number are stored as part of a program.
-
-Full list of supported statements and functions
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-System
-------
-
-- BYE		- *exits Basic, reboots and retries booting from flash*
-- END 		- *stops execution from the program, also "STOP"*
-- MEM		- *displays memory usage statistics*
-- NEW		- *clears the current program*
-- RUN		- *executes the current program*
-
-IO, Documentation
------------------
-
-- PEEK( address )	- *get a 32-bit value from a memory address*
-- POKE			- *write a 32-bit value to memory*
-- USR(addr, arg1, ..) - *Execute a machine language function*
-- PRINT expression	- *print out the expression, also "?"*
-- PHEX expression	- *print expression as a hex number*
-- REM stuff		- *remark/comment, also "'"*
-
-Expressions, Math
------------------
-
-- A=V, LET A=V	- *assign value to a variable*
-- +, -, \*, / - *Math*
-- <,<=,=,<>,!=,>=,> - *Comparisons*
-- ABS( expression )  - *returns the absolute value of the expression*
-- RSEED( v ) - *sets the random seed to v*
-- RND( m ) - *returns a random number from 0 to m*
-- A=1234 - * Assign a decimal value*
-- A=&h1A2 - * Assign a hex value*
-- A=&b1001 - *Assign a binary value*
-
-Control
--------
-
-- IF expression statement - *perform statement if expression is true*
-- FOR variable = start TO end	- *start for block*
-- FOR variable = start TO end STEP value - *start for block with step*
-- NEXT - *end of for block*
-- GOTO linenumber - *continue execution at this line number*
-- GOSUB linenumber - *call a subroutine at this line number*
-- RETURN	- *return from a subroutine*
-- DELAY		- *Delay a given number of milliseconds*
-
-Pin IO
-------
-- IODIR		- *Set a GPIO-pin as an output (1) or input (0)*
-- IOSET		- *Set a GPIO-pin, configured as output, to high (1) or low (0)*
-- IOGET		- *Get the value of a GPIO-pin*
-
-
-Example programs
-~~~~~~~~~~~~~~~~
-
-Here are a few example commands and programs to get you started...
-
-Read UART_DATE register of uart0
---------------------------------
-
-::
-
-	> PHEX PEEK(&h3FF40078)
-	15122500
-
-Set GPIO2 using memory writes to GPIO_OUT_REG
----------------------------------------------
-
-Note: you can do this easier with the IOSET command
-
-::
-
-	> POKE &h3FF44004,PEEK(&h3FF44004) OR &b100
-
-Get value of GPIO0
-------------------
-
-::
-
-	> IODIR 0,0
-	> PRINT IOGET(0)
-	0
-
-Blink LED
----------
-
-Hook up an LED between GPIO2 and ground. When running the program, the LED should blink 10 times.
-
-::
-
-	10 IODIR 2,1
-	20 FOR A=1 TO 10
-	30 IOSET 2,1
-	40 DELAY 250
-	50 IOSET 2,0
-	60 DELAY 250
-	70 NEXT A
-	RUN
-
-Credits
-~~~~~~~
-
-The ROM console is based on "TinyBasicPlus" by Mike Field and Scott Lawrence, which is based on "68000 TinyBasic" by Gordon Brandly
-

docs/zh_CN/api-guides/index.rst

@@ -30,7 +30,6 @@ API 指南
    Memory Types <memory-types>
    分区表 <partition-tables>
    :esp32: 射频校准 <RF_calibration>
-   :esp32: ROM 调试控制台 <romconsole>
    :esp32: 安全启动 <../security/secure-boot-v1>
    安全启动 V2 <../security/secure-boot-v2>
    线程本地存储 <thread-local-storage>

docs/zh_CN/api-guides/romconsole.rst

@@ -1 +0,0 @@
-.. include:: ../../en/api-guides/romconsole.rst