driver(I2S): Fix I2S reset issue

`i2s_start` reseting I2S in incorrect order causeing the word-order error.

closes https://github.com/espressif/esp-idf/issues/5410
This commit is contained in:
houwenxiang 2020-06-08 11:21:41 +08:00 committed by bot
parent 5d970c0e8c
commit 166d5f17f3
3 changed files with 14 additions and 30 deletions

View File

@ -107,15 +107,6 @@ static int _i2s_adc_channel = -1;
static i2s_dma_t *i2s_create_dma_queue(i2s_port_t i2s_num, int dma_buf_count, int dma_buf_len);
static esp_err_t i2s_destroy_dma_queue(i2s_port_t i2s_num, i2s_dma_t *dma);
static esp_err_t i2s_reset_fifo(i2s_port_t i2s_num)
{
I2S_CHECK((i2s_num < I2S_NUM_MAX), "i2s_num error", ESP_ERR_INVALID_ARG);
I2S_ENTER_CRITICAL();
i2s_hal_reset_fifo(&(p_i2s_obj[i2s_num]->hal));
I2S_EXIT_CRITICAL();
return ESP_OK;
}
static inline void gpio_matrix_out_check(uint32_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv)
{
//if pin = -1, do not need to configure
@ -469,6 +460,14 @@ esp_err_t i2s_set_clk(i2s_port_t i2s_num, uint32_t rate, i2s_bits_per_sample_t b
ESP_LOGI(I2S_TAG, "PLL_D2: Req RATE: %d, real rate: %0.3f, BITS: %u, CLKM: %u, BCK: %u, MCLK: %0.3f, SCLK: %f, diva: %d, divb: %d",
rate, real_rate, bits, clkmInteger, bck, (double)I2S_BASE_CLK / mclk, real_rate*bits*channel, 64, clkmDecimals);
}
if (p_i2s_obj[i2s_num]->mode & I2S_MODE_TX) {
p_i2s_obj[i2s_num]->tx->curr_ptr = NULL;
p_i2s_obj[i2s_num]->tx->rw_pos = 0;
}
if (p_i2s_obj[i2s_num]->mode & I2S_MODE_RX) {
p_i2s_obj[i2s_num]->rx->curr_ptr = NULL;
p_i2s_obj[i2s_num]->rx->rw_pos = 0;
}
i2s_hal_set_tx_bits_mod(&(p_i2s_obj[i2s_num]->hal), bits);
i2s_hal_set_rx_bits_mod(&(p_i2s_obj[i2s_num]->hal), bits);
@ -643,9 +642,7 @@ static i2s_dma_t *i2s_create_dma_queue(i2s_port_t i2s_num, int dma_buf_count, in
}
dma->queue = xQueueCreate(dma_buf_count - 1, sizeof(char*));
dma->mux = xSemaphoreCreateMutex();
dma->rw_pos = 0;
dma->buf_size = dma_buf_len * sample_size;
dma->curr_ptr = NULL;
ESP_LOGI(I2S_TAG, "DMA Malloc info, datalen=blocksize=%d, dma_buf_count=%d", dma_buf_len * sample_size, dma_buf_count);
return dma;
}
@ -655,8 +652,6 @@ esp_err_t i2s_start(i2s_port_t i2s_num)
I2S_CHECK((i2s_num < I2S_NUM_MAX), "i2s_num error", ESP_ERR_INVALID_ARG);
//start DMA link
I2S_ENTER_CRITICAL();
i2s_reset_fifo(i2s_num);
i2s_hal_reset(&(p_i2s_obj[i2s_num]->hal));
esp_intr_disable(p_i2s_obj[i2s_num]->i2s_isr_handle);
@ -865,7 +860,6 @@ static esp_err_t i2s_param_config(i2s_port_t i2s_num, const i2s_config_t *i2s_co
}
#endif
// configure I2S data port interface.
i2s_reset_fifo(i2s_num);
i2s_hal_config_param(&(p_i2s_obj[i2s_num]->hal), i2s_config);
if ((p_i2s_obj[i2s_num]->mode & I2S_MODE_RX) && (p_i2s_obj[i2s_num]->mode & I2S_MODE_TX)) {
i2s_hal_enable_sig_loopback(&(p_i2s_obj[i2s_num]->hal));

View File

@ -40,13 +40,6 @@ typedef struct {
uint32_t version;
} i2s_hal_context_t;
/**
* @brief Reset I2S fifo
*
* @param hal Context of the HAL layer
*/
void i2s_hal_reset_fifo(i2s_hal_context_t *hal);
/**
* @brief Get I2S interrupt status
*
@ -214,7 +207,7 @@ void i2s_hal_set_tx_bits_mod(i2s_hal_context_t *hal, i2s_bits_per_sample_t bits)
void i2s_hal_set_rx_bits_mod(i2s_hal_context_t *hal, i2s_bits_per_sample_t bits);
/**
* @brief Reset I2S tx
* @brief Reset I2S TX & RX module, including DMA and FIFO
*
* @param hal Context of the HAL layer
*/

View File

@ -17,12 +17,6 @@
#include "soc/soc.h"
#include "hal/i2s_hal.h"
void i2s_hal_reset_fifo(i2s_hal_context_t *hal)
{
i2s_ll_reset_rx_fifo(hal->dev);
i2s_ll_reset_tx_fifo(hal->dev);
}
void i2s_hal_set_tx_mode(i2s_hal_context_t *hal, i2s_channel_t ch, i2s_bits_per_sample_t bits)
{
if (bits <= I2S_BITS_PER_SAMPLE_16BIT) {
@ -84,10 +78,13 @@ void i2s_hal_set_rx_bits_mod(i2s_hal_context_t *hal, i2s_bits_per_sample_t bits)
void i2s_hal_reset(i2s_hal_context_t *hal)
{
i2s_ll_reset_dma_in(hal->dev);
i2s_ll_reset_dma_out(hal->dev);
// Reset I2S TX/RX module first, and then, reset DMA and FIFO.
i2s_ll_reset_tx(hal->dev);
i2s_ll_reset_rx(hal->dev);
i2s_ll_reset_dma_in(hal->dev);
i2s_ll_reset_dma_out(hal->dev);
i2s_ll_reset_rx_fifo(hal->dev);
i2s_ll_reset_tx_fifo(hal->dev);
}
void i2s_hal_start_tx(i2s_hal_context_t *hal)