docs: add pyparsing install to setup guide

docs/en/get-started-cmake/linux-setup-scratch.rst

@@ -19,11 +19,11 @@ To compile with ESP-IDF you need to get the following packages:
 
 - Ubuntu and Debian::
 
-    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache
+    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache
 
 .. note::
     CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake".

docs/en/get-started-cmake/linux-setup.rst

@@ -17,11 +17,11 @@ To compile with ESP-IDF you need to get the following packages:
 
 - Ubuntu and Debian::
 
-    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache
+    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache
 
 .. note::
     CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake".

docs/en/get-started/linux-setup-scratch.rst

@@ -13,11 +13,11 @@ To compile with ESP-IDF you need to get the following packages:
 
 - Ubuntu and Debian::
 
-    sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
+    sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing
 
 .. note::
 

docs/en/get-started/linux-setup.rst

@@ -14,11 +14,11 @@ To compile with ESP-IDF you need to get the following packages:
 
 - Ubuntu and Debian::
 
-    sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-cryptography python-future
+    sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-cryptography python-future python-pyparsing
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-cryptography python2-future
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-cryptography python2-future python2-pyparsing
 
 .. note::
 

docs/zh_CN/get-started-cmake/linux-setup-scratch.rst

@@ -19,11 +19,11 @@
 
 - Ubuntu 和 Debian::
 
-    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache
+    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache
 
 .. note::
     使用 ESP-IDF 需要 CMake 3.5 或以上版本。较早版本的 Linux 可能需要升级才能向后移植仓库，或安装 "cmake3" 软件包，而不是安装 "cmake"。

docs/zh_CN/get-started-cmake/linux-setup.rst

@@ -17,11 +17,11 @@ Linux 平台工具链的标准设置 (CMake)
 
 - Ubuntu 和 Debian::
 
-    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache
+    sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache
 
 .. note::
     使用 ESP-IDF 需要 CMake 3.5 或以上版本。较早版本的 Linux 可能需要升级才能向后移植仓库，或安装 "cmake3" 软件包，而不是安装 "cmake"。

docs/zh_CN/get-started/linux-setup-scratch.rst

@@ -14,11 +14,11 @@
 
 - Ubuntu 和 Debian::
 
-    sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
+    sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing
 
 .. note::
 

docs/zh_CN/get-started/linux-setup.rst

@@ -16,11 +16,11 @@ Linux 平台工具链的标准设置
 
 - Ubuntu and Debian::
 
-    sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
+    sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing
 
 - Arch::
 
-    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
+    sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing
 
 .. note::