alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

feat(gpio): update c5 mp gpio docs

Browse Source
This commit is contained in:
gaoxu 2024-05-13 14:15:20 +08:00
parent 6def5faab5
commit 1138d7d56a
5 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/espcoredump/src/core_dump_uart.c
View File

@ -154,7 +154,7 @@ static esp_err_t esp_core_dump_uart_hw_init(void)
//Make sure txd/rxd are enabled
// use direct reg access instead of gpio_pullup_dis which can cause exception when flash cache is disabled
REG_CLR_BIT(GPIO_PIN_REG_1, FUN_PU);
REG_CLR_BIT(GPIO_PIN_REG_1, FUN_PU); //TODO: IDF-9948
gpio_hal_func_sel(&gpio_hal, U0RXD_GPIO_NUM, U0RXD_MUX_FUNC);
gpio_hal_func_sel(&gpio_hal, U0TXD_GPIO_NUM, U0TXD_MUX_FUNC);
ESP_COREDUMP_LOGI("Press Enter to print core dump to UART...");

4
components/soc/esp32c5/beta3/include/soc/Kconfig.soc_caps.in
View File

@ -143,6 +143,10 @@ config SOC_BT_SUPPORTED
bool
default y
config SOC_PM_SUPPORTED
bool
default y
config SOC_XTAL_SUPPORT_40M
bool
default y

2
components/soc/esp32c5/beta3/include/soc/soc_caps.h
View File

@ -81,7 +81,7 @@
#define SOC_MODEM_CLOCK_SUPPORTED 1 // TODO: [ESP32C5] IDF-8845 need check, it is opened because pll has been used on beta3
#define SOC_BT_SUPPORTED 1
#define SOC_PHY_SUPPORTED 1
// #define SOC_PM_SUPPORTED 1 // TODO: [ESP32C5] IDF-8643
#define SOC_PM_SUPPORTED 1
/*-------------------------- XTAL CAPS ---------------------------------------*/
#define SOC_XTAL_SUPPORT_40M 1

2
docs/en/api-reference/peripherals/gpio/esp32c5.inc
View File

@ -9,7 +9,7 @@
.. gpio-summary
The {IDF_TARGET_NAME} chip features 27 physical GPIO pins (GPIO0 ~ GPIO26). Each pin can be used as a general-purpose I/O, or to be connected to an internal peripheral signal. Through GPIO matrix and IO MUX, peripheral input signals can be from any IO pins, and peripheral output signals can be routed to any IO pins. Together these modules provide highly configurable I/O. For more details, see *{IDF_TARGET_NAME} Technical Reference Manual* > *IO MUX and GPIO Matrix (GPIO, IO_MUX)* [`PDF <{IDF_TARGET_TRM_EN_URL}#iomuxgpio>`__].
The {IDF_TARGET_NAME} chip features 29 physical GPIO pins (GPIO0 ~ GPIO28). Each pin can be used as a general-purpose I/O, or to be connected to an internal peripheral signal. Through GPIO matrix and IO MUX, peripheral input signals can be from any IO pins, and peripheral output signals can be routed to any IO pins. Together these modules provide highly configurable I/O. For more details, see *{IDF_TARGET_NAME} Technical Reference Manual* > *IO MUX and GPIO Matrix (GPIO, IO_MUX)* [`PDF <{IDF_TARGET_TRM_EN_URL}#iomuxgpio>`__].
The table below provides more information on pin usage, and please note the comments in the table for GPIOs with restrictions.

2
docs/zh_CN/api-reference/peripherals/gpio.rst
View File

@ -73,7 +73,7 @@ GPIO 驱动提供了一个函数 :cpp:func:`gpio_dump_io_configuration` 用来
如果 IO 管脚通过 GPIO 交换矩阵连接到内部外设信号，输出信息打印中的外设信号 ID 定义可以在 :component_file:`soc/{IDF_TARGET_PATH_NAME}/include/soc/gpio_sig_map.h` 头文件中查看。``**RESERVED**`` 字样则表示此 IO 用于连接 SPI flash 或 PSRAM，强烈建议不要重新配置这些管脚用于其他功能。
请不要依赖技术参考手册中记录的GPIO默认配置状态，因为特殊用途的GPIO可能会在app_main之前被引导程序或应用程序启动阶段的代码更改。
请不要依赖技术参考手册中记录的 GPIO 默认配置状态，因为特殊用途的 GPIO 可能会在 app_main 之前被引导程序或应用程序启动阶段的代码更改。
.. only:: esp32c3 or esp32c6 or esp32h2 or esp32p4 or esp32s2 or esp32s3 or esp32c5