Merge branch 'docs/add_more_information_about_c3_gpio0_gpio5' into 'master'

Add more information about which GPIOs of ESP32-C3/ESP32-C2/ESP32-H2 can wake up the chip from Deep-sleep mode Closes DOC-4899 See merge request espressif/esp-idf!23279
2024-10-05 20:47:46 -04:00 · 2023-05-05 12:56:21 +08:00 · 2023-05-05 12:56:21 +08:00 · 0bfffa0160
commit 0bfffa0160
parent ef232423dd 719b75da9b
8 changed files with 29 additions and 23 deletions
--- a/docs/en/api-reference/peripherals/gpio/esp32c2.inc
+++ b/docs/en/api-reference/peripherals/gpio/esp32c2.inc
@ -109,8 +109,8 @@ The table below provides more information on pin usage, and please note the comm

 .. note::

-    - Strapping pin: GPIO8 and GPIO9 are strapping pins. For more infomation, please refer to `ESP8684 datasheet <https://www.espressif.com/sites/default/files/documentation/esp8684_datasheet_en.pdf>`_.
+    - Strapping pin: GPIO8 and GPIO9 are strapping pins. For more information, please refer to `ESP8684 datasheet <https://www.espressif.com/sites/default/files/documentation/esp8684_datasheet_en.pdf>`_.
    - SPI0/1: GPIO12-17 are usually used for SPI flash and not recommended for other uses.
-    - RTC: GPIO0-5 can be used when in Deep-sleep mode.
+    - RTC: GPIO0-5 can be used to wake up the chip from Deep-sleep mode. Other GPIOs can only wake up the chip from Light-sleep mode. For more information, please refer to Section :ref:`Wakeup Sources<api-reference-wakeup-source>`.

 ---
--- a/docs/en/api-reference/peripherals/gpio/esp32c3.inc
+++ b/docs/en/api-reference/peripherals/gpio/esp32c3.inc
@ -112,9 +112,9 @@ The table below provides more information on pin usage, and please note the comm

 .. note::

-    - Strapping pin: GPIO2, GPIO8 and GPIO9 are strapping pins. For more infomation, please refer to `ESP32-C3 datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_.
+    - Strapping pin: GPIO2, GPIO8 and GPIO9 are strapping pins. For more information, please refer to `ESP32-C3 Datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_.
    - SPI0/1: GPIO12-17 are usually used for SPI flash and PSRAM and are not recommended for other uses.
    - USB-JTAG: GPIO 18 and 19 are used by USB-JTAG by default. In order to use them as GPIOs, USB-JTAG will be disabled by the drivers.
-    - RTC: GPIO0-5 can be used when in Deep-sleep mode.
+    - RTC: GPIO0-5 can be used to wake up the chip from Deep-sleep mode. Other GPIOs can only wake up the chip from Light-sleep mode. For more information, please refer to Section :ref:`Wakeup Sources<api-reference-wakeup-source>`.

 ---
--- a/docs/en/api-reference/peripherals/gpio/esp32h2.inc
+++ b/docs/en/api-reference/peripherals/gpio/esp32h2.inc
@ -51,35 +51,35 @@ The table below provides more information on pin usage, and please note the comm

    * - GPIO7
      -
-      -
+      - RTC

    * - GPIO8
      -
-      - Strapping pin
+      - Strapping pin, RTC

    * - GPIO9
      -
-      - Strapping pin
+      - Strapping pin, RTC

    * - GPIO10
      - Analog comparator reference voltage
-      -
+      - RTC

    * - GPIO11
      - Analog comparator input (non-inverting)
-      -
+      - RTC

    * - GPIO12
      -
-      -
+      - RTC

    * - GPIO13
      -
-      -
+      - RTC

    * - GPIO14
      -
-      -
+      - RTC

    * - GPIO15
      -
@ -135,10 +135,11 @@ The table below provides more information on pin usage, and please note the comm

 .. note::

-    - Strapping pin: GPIO2, GPIO3, GPIO8, GPIO9, and GPIO25 are strapping pins. For more infomation, please refer to `ESP32H2 datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_.
+    - Strapping pin: GPIO2, GPIO3, GPIO8, GPIO9, and GPIO25 are strapping pins. For more information, please refer to `ESP32H2 datasheet <{IDF_TARGET_DATASHEET_EN_URL}>`_.
 	  - SPI0/1: GPIO15-21 are usually used for SPI flash and not recommended for other uses.
 	  - USB-Serial-JTAG: GPIO 26 and 27 are used by USB-Serial-JTAG by default. In order to use them as GPIOs, USB-Serial-JTAG will be disabled by the drivers.
    - For chip variants with an SiP flash built in, GPIO15 ~ GPIO21 are dedicated to connecting the SiP flash and are not fan-out to the external pins. In addition, GPIO6 ~ GPIO7 are also not fan-out to the external pins. In conclusion, only GPIO0~ GPIO5, GPIO8~ GPIO14, GPIO22~ GPIO27 are available to users.
    - For chip variant without SiP flash, apart from the flash IOs mentioned above, GPIO22 is not fan-out to the external pin, thus they're not available to users.
+    - RTC: GPIO7-14 can be used to wake up the chip from Deep-sleep mode. Other GPIOs can only wake up the chip from Light-sleep mode. For more information, please refer to Section :ref:`Wakeup Sources<api-reference-wakeup-source>`.

 ---
--- a/docs/en/api-reference/system/sleep_modes.rst
+++ b/docs/en/api-reference/system/sleep_modes.rst
@ -42,6 +42,8 @@ Once wakeup sources are configured, the application can enter sleep mode using :

 If Wi-Fi connections need to be maintained, enable Wi-Fi Modem-sleep mode and automatic Light-sleep feature (see :doc:`Power Management APIs <power_management>`). This will allow the system to wake up from sleep automatically when required by the Wi-Fi driver, thereby maintaining a connection to the AP.

+.. _api-reference-wakeup-source:
+
 Wakeup Sources
 --------------

--- a/docs/zh_CN/api-reference/peripherals/gpio/esp32c2.inc
+++ b/docs/zh_CN/api-reference/peripherals/gpio/esp32c2.inc
@ -111,6 +111,6 @@

    - Strapping 管脚：GPIO8 和 GPIO9 是 Strapping 管脚。更多信息请参考 `ESP8684 技术规格书 <{IDF_TARGET_DATASHEET_CN_URL}>`_。
    - SPI0/1：GPIO12-17 通常用于 SPI flash，不推荐用于其他用途。
-    - RTC：GPIO0-5 可以在 Deep-sleep 模式时使用。
+    - RTC：GPIO0-5 可用于将芯片从 Deep-sleep 模式中唤醒，其他 GPIO 仅能将芯片从 Light-sleep 模式中唤醒。更多信息请参考 :ref:`唤醒源<api-reference-wakeup-source>` 章节。

 ---
--- a/docs/zh_CN/api-reference/peripherals/gpio/esp32c3.inc
+++ b/docs/zh_CN/api-reference/peripherals/gpio/esp32c3.inc
@ -114,6 +114,6 @@
    - Strapping 管脚：GPIO2、GPIO8、和 GPIO9 是 Strapping 管脚。更多信息请参考 `ESP32-C3 技术规格书 <{IDF_TARGET_DATASHEET_CN_URL}>`_。
    - SPI0/1：GPIO12-17 通常用于 SPI flash 和 PSRAM，不推荐用于其他用途。
    - USB-JTAG：GPIO18 和 GPIO19 默认用于 USB-JTAG。用做 GPIO 时驱动程序将禁用 USB-JTAG。
-    - RTC：GPIO0-5 可以在 Deep-sleep 模式时使用。
+    - RTC：GPIO0-5 可用于将芯片从 Deep-sleep 模式中唤醒，其他 GPIO 仅能将芯片从 Light-sleep 模式中唤醒。更多信息请参考 :ref:`唤醒源<api-reference-wakeup-source>` 章节。

 ---
--- a/docs/zh_CN/api-reference/peripherals/gpio/esp32h2.inc
+++ b/docs/zh_CN/api-reference/peripherals/gpio/esp32h2.inc
@ -53,35 +53,35 @@

    * - GPIO7
      -
-      -
+      - RTC

    * - GPIO8
      -
-      - Strapping 管脚
+      - Strapping 管脚，RTC

    * - GPIO9
      -
-      - Strapping 管脚
+      - Strapping 管脚，RTC

    * - GPIO10
      - 模拟比较器外部参考电压
-      -
+      - RTC

    * - GPIO11
      - 模拟比较器同相输入
-      -
+      - RTC

    * - GPIO12
      -
-      -
+      - RTC

    * - GPIO13
      -
-      -
+      - RTC

    * - GPIO14
      -
-      -
+      - RTC

    * - GPIO15
      -
@ -142,5 +142,6 @@
    - USB-Serial-JTAG: GPIO26 和 GPIO27 默认用于 USB-Serial-JTAG。用做 GPIO 时驱动程序将禁用 USB-Serial-JTAG。
    - 对于合封了 flash 的芯片型号， GPIO15 ~ GPIO21 专门用于连接该 flash, 并未引出至芯片管脚。且 GPIO6 ~ GPIO7 也未引出至芯片管脚，用户不可用。用户可配置使用其他剩余的 19 个 GPIO 管脚, 编号为: GPIO0 ~ GPIO5、GPIO8 ~ GPIO14、GPIO22 ~ GPIO27。
    - 对于未合封 flash 的芯片型号， 除了以上提到的给 Flash 专用的 GPIO 以外, GPIO22 也并未引出至芯片管脚，用户不可用。
+    - RTC：GPIO7-14 可用于将芯片从 Deep-sleep 模式中唤醒，其他 GPIO 仅能将芯片从 Light-sleep 模式中唤醒。更多信息请参考 :ref:`唤醒源<api-reference-wakeup-source>` 章节。

 ---
--- a/docs/zh_CN/api-reference/system/sleep_modes.rst
+++ b/docs/zh_CN/api-reference/system/sleep_modes.rst
@ -42,6 +42,8 @@ Light-sleep 和 Deep-sleep 模式有多种唤醒源。这些唤醒源也可以

 如需保持 Wi-Fi 连接，请启用 Wi-Fi Modem-sleep 模式和自动 Light-sleep 模式（请参阅 :doc:`电源管理 API <power_management>`）。在这两种模式下，Wi-Fi 驱动程序发出请求时，系统将自动从睡眠中被唤醒，从而保持与 AP 的连接。

+.. _api-reference-wakeup-source:
+
 唤醒源
 ---------