esp-idf/components/esp32/dport_panic_highint_hdl.S

209 lines
6.4 KiB
ArmAsm
Raw Normal View History

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <xtensa/coreasm.h>
#include <xtensa/corebits.h>
#include <xtensa/config/system.h>
#include "freertos/xtensa_context.h"
2019-03-26 04:30:43 -04:00
#include "esp_private/panic_reason.h"
#include "sdkconfig.h"
#include "soc/soc.h"
#include "soc/dport_reg.h"
/*
Interrupt , a high-priority interrupt, is used for several things:
- Dport access mediation
- Cache error panic handler
- Interrupt watchdog panic handler
*/
#define L4_INTR_STACK_SIZE 12
#define L4_INTR_A2_OFFSET 0
#define L4_INTR_A3_OFFSET 4
#define L4_INTR_A4_OFFSET 8
.data
_l4_intr_stack:
.space L4_INTR_STACK_SIZE
.section .iram1,"ax"
.global xt_highint4
.type xt_highint4,@function
.align 4
xt_highint4:
#ifndef CONFIG_FREERTOS_UNICORE
/* See if we're here for the dport access interrupt */
rsr a0, INTERRUPT
extui a0, a0, ETS_DPORT_INUM, 1
bnez a0, .handle_dport_access_int
#endif // CONFIG_FREERTOS_UNICORE
/* Allocate exception frame and save minimal context. */
mov a0, sp
addi sp, sp, -XT_STK_FRMSZ
s32i a0, sp, XT_STK_A1
#if XCHAL_HAVE_WINDOWED
s32e a0, sp, -12 /* for debug backtrace */
#endif
rsr a0, PS /* save interruptee's PS */
s32i a0, sp, XT_STK_PS
rsr a0, EPC_4 /* save interruptee's PC */
s32i a0, sp, XT_STK_PC
#if XCHAL_HAVE_WINDOWED
s32e a0, sp, -16 /* for debug backtrace */
#endif
s32i a12, sp, XT_STK_A12 /* _xt_context_save requires A12- */
s32i a13, sp, XT_STK_A13 /* A13 to have already been saved */
call0 _xt_context_save
/* Save vaddr into exception frame */
rsr a0, EXCVADDR
s32i a0, sp, XT_STK_EXCVADDR
/* Figure out reason, save into EXCCAUSE reg */
rsr a0, INTERRUPT
extui a0, a0, ETS_CACHEERR_INUM, 1 /* get cacheerr int bit */
beqz a0, 1f
/* Kill this interrupt; we cannot reset it. */
rsr a0, INTENABLE
movi a4, ~(1<<ETS_CACHEERR_INUM)
and a0, a4, a0
wsr a0, INTENABLE
movi a0, PANIC_RSN_CACHEERR
j 9f
1:
#if CONFIG_ESP_INT_WDT_CHECK_CPU1
/* Check if the cause is the app cpu failing to tick.*/
movi a0, int_wdt_app_cpu_ticked
l32i a0, a0, 0
bnez a0, 2f
/* It is. Modify cause. */
movi a0,PANIC_RSN_INTWDT_CPU1
j 9f
2:
#endif
/* Set EXCCAUSE to reflect cause of the wdt int trigger */
movi a0,PANIC_RSN_INTWDT_CPU0
9:
/* Found the reason, now save it. */
s32i a0, sp, XT_STK_EXCCAUSE
/* _xt_context_save seems to save the current a0, but we need the interuptees a0. Fix this. */
rsr a0, EXCSAVE_4 /* save interruptee's a0 */
s32i a0, sp, XT_STK_A0
/* Set up PS for C, disable all interrupts except NMI and debug, and clear EXCM. */
movi a0, PS_INTLEVEL(5) | PS_UM | PS_WOE
wsr a0, PS
//Call panic handler
mov a6,sp
call4 panicHandler
call0 _xt_context_restore
l32i a0, sp, XT_STK_PS /* retrieve interruptee's PS */
wsr a0, PS
l32i a0, sp, XT_STK_PC /* retrieve interruptee's PC */
wsr a0, EPC_4
l32i a0, sp, XT_STK_A0 /* retrieve interruptee's A0 */
l32i sp, sp, XT_STK_A1 /* remove exception frame */
rsync /* ensure PS and EPC written */
rsr a0, EXCSAVE_4 /* restore a0 */
rfi 4
#ifndef CONFIG_FREERTOS_UNICORE
.align 4
.handle_dport_access_int:
/* This section is for dport access register protection */
/* Allocate exception frame and save minimal context. */
/* Because the interrupt cause code has protection that only
2019-03-26 04:30:43 -04:00
allows one cpu to enter in the dport section of the L4
interrupt at one time, there's no need to have two
_l4_intr_stack for each cpu */
/* This int is edge-triggered and needs clearing. */
movi a0, (1<<ETS_DPORT_INUM)
wsr a0, INTCLEAR
/* Save A2, A3, A4 so we can use those registers */
movi a0, _l4_intr_stack
s32i a2, a0, L4_INTR_A2_OFFSET
s32i a3, a0, L4_INTR_A3_OFFSET
s32i a4, a0, L4_INTR_A4_OFFSET
/* handle dport interrupt */
/* get CORE_ID */
getcoreid a0
beqz a0, 2f
/* current cpu is 1 */
movi a0, DPORT_CPU_INTR_FROM_CPU_3_REG
movi a2, 0
s32i a2, a0, 0 /* clear intr */
movi a0, 0 /* other cpu id */
j 3f
2:
/* current cpu is 0 */
movi a0, DPORT_CPU_INTR_FROM_CPU_2_REG
movi a2, 0
s32i a2, a0, 0 /* clear intr */
movi a0, 1 /* other cpu id */
3:
rsil a4, CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL /* disable nested iterrupt */
/* set and wait flag */
movi a2, dport_access_start
addx4 a2, a0, a2
movi a3, 1
s32i a3, a2, 0
memw
movi a2, dport_access_end
addx4 a2, a0, a2
.check_dport_access_end:
l32i a3, a2, 0
beqz a3, .check_dport_access_end
wsr a4, PS /* restore iterrupt level */
/* Done. Restore registers and return. */
movi a0, _l4_intr_stack
l32i a2, a0, L4_INTR_A2_OFFSET
l32i a3, a0, L4_INTR_A3_OFFSET
l32i a4, a0, L4_INTR_A4_OFFSET
rsync /* ensure register restored */
rsr a0, EXCSAVE_4 /* restore a0 */
rfi 4
#endif // CONFIG_FREERTOS_UNICORE
/* The linker has no reason to link in this file; all symbols it exports are already defined
2019-03-26 04:30:43 -04:00
(weakly!) in the default int handler. Define a symbol here so we can use it to have the
linker inspect this anyway. */
.global ld_include_panic_highint_hdl
ld_include_panic_highint_hdl: