esp-idf/components/esp_hw_support/CMakeLists.txt

idf_build_get_property(target IDF_TARGET)

set(requires soc)
if(${target} STREQUAL "esp32")
     list(APPEND requires efuse)
endif()

set(srcs "compare_set.c" "cpu_util.c")
if(NOT BOOTLOADER_BUILD)
    list(APPEND srcs "clk_ctrl_os.c"
                     "regi2c_ctrl.c")
endif()

idf_component_register(SRCS ${srcs}
                       INCLUDE_DIRS include
                       REQUIRES ${requires}
                       PRIV_REQUIRES efuse
                       LDFRAGMENTS linker.lf)

idf_build_get_property(target IDF_TARGET)
add_subdirectory(port/${target})
ESP32: Fix xtal 32k not oscillate or oscillate too slowly issue ESP32 in revision0 and revision1 uses touchpad to provide current to oscillate xtal 32k. But revision2 and revision3 do not need to do that. Note: touchpad can not work and toupad/ULP wakeup sources are not available when toupad provides current to xtal 32k 2020-09-18 05:23:28 -04:00			`idf_build_get_property(target IDF_TARGET)`

			`set(requires soc)`
			`if(${target} STREQUAL "esp32")`
			`list(APPEND requires efuse)`
			`endif()`

rtc: add function to en/disable the rtc clock 2020-11-23 02:35:09 -05:00			`set(srcs "compare_set.c" "cpu_util.c")`
			`if(NOT BOOTLOADER_BUILD)`
regi2c: add a spinlock for accessing (reg)I2C devices When not compiling bootloader, a spinlock will be used for reading or writing I2C internal devices/registers. When compiling for bootloader, no need to use any lock. 2021-03-30 02:50:27 -04:00			`list(APPEND srcs "clk_ctrl_os.c"`
			`"regi2c_ctrl.c")`
rtc: add function to en/disable the rtc clock 2020-11-23 02:35:09 -05:00			`endif()`

			`idf_component_register(SRCS ${srcs}`
esp_hw_support: create component 2020-09-30 03:24:04 -04:00			`INCLUDE_DIRS include`
ESP32: Fix xtal 32k not oscillate or oscillate too slowly issue ESP32 in revision0 and revision1 uses touchpad to provide current to oscillate xtal 32k. But revision2 and revision3 do not need to do that. Note: touchpad can not work and toupad/ULP wakeup sources are not available when toupad provides current to xtal 32k 2020-09-18 05:23:28 -04:00			`REQUIRES ${requires}`
driver/adc: support for esp32s2 adc calibration scheme V2 notice that the o_code is now pulled from efuse instead of automatically calibrated. This may influence other parts of the system. Closes https://github.com/espressif/esp-idf/issues/5455 2020-12-03 07:08:59 -05:00			`PRIV_REQUIRES efuse`
soc: move implementations to esp_hw_support 2020-09-25 03:23:52 -04:00			`LDFRAGMENTS linker.lf)`

			`idf_build_get_property(target IDF_TARGET)`
			`add_subdirectory(port/${target})`