esp-idf/examples/peripherals/i2s/i2s_es8311/main/i2s_es8311_example.c

/*
 * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: CC0-1.0
 */

#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/i2s.h"
#include "esp_system.h"
#include "esp_check.h"
#include "es8311.h"

/* I2C port and GPIOs */
#define I2C_NUM         (0)
#ifdef CONFIG_IDF_TARGET_ESP32C3
#define I2C_SDA_IO      (GPIO_NUM_17)
#define I2C_SCL_IO      (GPIO_NUM_16)
#else
#define I2C_SDA_IO      (GPIO_NUM_15)
#define I2C_SCL_IO      (GPIO_NUM_14)
#endif

/* I2S port and GPIOs */
#define I2S_NUM         (0)
#define I2S_MCK_IO      (GPIO_NUM_0)
#define I2S_BCK_IO      (GPIO_NUM_4)
#define I2S_WS_IO       (GPIO_NUM_5)
#define I2S_DO_IO       (GPIO_NUM_18)
#define I2S_DI_IO       (GPIO_NUM_19)

/* Example configurations */
#define EXAMPLE_RECV_BUF_SIZE   (2048)
#define EXAMPLE_SAMPLE_RATE     (16000)
#define EXAMPLE_MCLK_MULTIPLE   I2S_MCLK_MULTIPLE_256
#define EXAMPLE_VOICE_VOLUME    CONFIG_EXAMPLE_VOICE_VOLUME
#if CONFIG_EXAMPLE_MODE_ECHO
#define EXAMPLE_MIC_GAIN        CONFIG_EXAMPLE_MIC_GAIN
#endif

static const char *TAG = "i2s_es8311";
static const char err_reason[][30] = {"input param is invalid",
                                      "operation timeout"
                                     };

/* Import music file as buffer */
#if CONFIG_EXAMPLE_MODE_MUSIC
extern const uint8_t music_pcm_start[] asm("_binary_canon_pcm_start");
extern const uint8_t music_pcm_end[]   asm("_binary_canon_pcm_end");
#endif

static esp_err_t es8311_codec_init(void)
{
    /* Initialize I2C peripheral */
    i2c_config_t es_i2c_cfg = {
        .sda_io_num = I2C_SDA_IO,
        .scl_io_num = I2C_SCL_IO,
        .mode = I2C_MODE_MASTER,
        .sda_pullup_en = GPIO_PULLUP_ENABLE,
        .scl_pullup_en = GPIO_PULLUP_ENABLE,
        .master.clk_speed = 100000,
    };
    ESP_RETURN_ON_ERROR(i2c_param_config(I2C_NUM, &es_i2c_cfg), TAG, "config i2c failed");
    ESP_RETURN_ON_ERROR(i2c_driver_install(I2C_NUM, I2C_MODE_MASTER,  0, 0, 0), TAG, "install i2c driver failed");

    /* Initialize es8311 codec */
    es8311_handle_t es_handle = es8311_create(I2C_NUM, ES8311_ADDRRES_0);
    ESP_RETURN_ON_FALSE(es_handle, ESP_FAIL, TAG, "es8311 create failed");
    es8311_clock_config_t es_clk = {
        .mclk_from_mclk_pin = true,
        .sample_frequency = EXAMPLE_SAMPLE_RATE
    };

    es8311_init(es_handle, &es_clk, ES8311_RESOLUTION_16, ES8311_RESOLUTION_16);
    ESP_RETURN_ON_ERROR(es8311_sample_frequency_config(es_handle, EXAMPLE_SAMPLE_RATE * EXAMPLE_MCLK_MULTIPLE, EXAMPLE_SAMPLE_RATE), TAG, "set es8311 sample frequency failed");
    ESP_RETURN_ON_ERROR(es8311_voice_volume_set(es_handle, EXAMPLE_VOICE_VOLUME, NULL), TAG, "set es8311 volume failed");
    ESP_RETURN_ON_ERROR(es8311_microphone_config(es_handle, false), TAG, "set es8311 microphone failed");
#if CONFIG_EXAMPLE_MODE_ECHO
    ESP_RETURN_ON_ERROR(es8311_microphone_gain_set(es_handle, EXAMPLE_MIC_GAIN), TAG, "set es8311 microphone gain faield");
#endif
    return ESP_OK;
}

static esp_err_t i2s_driver_init(void)
{
    i2s_config_t i2s_cfg = {
        .mode = I2S_MODE_MASTER | I2S_MODE_TX | I2S_MODE_RX,
        .sample_rate = EXAMPLE_SAMPLE_RATE,
        .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
        .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
        .communication_format = I2S_COMM_FORMAT_STAND_I2S,
        .tx_desc_auto_clear = true,
#if SOC_I2S_SUPPORTS_TDM
        .total_chan = 2,
        .chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
        .left_align = false,
        .big_edin = false,
        .bit_order_msb = false,
        .skip_msk = false,
#endif
        .dma_buf_count = 8,
        .dma_buf_len = 64,
        .use_apll = false,
        .mclk_multiple = EXAMPLE_MCLK_MULTIPLE,
        .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
    };

    ESP_RETURN_ON_ERROR(i2s_driver_install(I2S_NUM, &i2s_cfg, 0, NULL), TAG, "install i2s failed");
    i2s_pin_config_t i2s_pin_cfg = {
        .mck_io_num = I2S_MCK_IO,
        .bck_io_num = I2S_BCK_IO,
        .ws_io_num = I2S_WS_IO,
        .data_out_num = I2S_DO_IO,
        .data_in_num = I2S_DI_IO
    };
    ESP_RETURN_ON_ERROR(i2s_set_pin(I2S_NUM, &i2s_pin_cfg), TAG, "set i2s pins failed");
    return ESP_OK;
}

#if CONFIG_EXAMPLE_MODE_MUSIC
static void i2s_music(void *args)
{
    esp_err_t ret = ESP_OK;
    size_t bytes_write = 0;
    while (1) {
        /* Write music to earphone */
        ret = i2s_write(I2S_NUM, music_pcm_start, music_pcm_end - music_pcm_start, &bytes_write, portMAX_DELAY);
        if (ret != ESP_OK) {
            /* Since we set timeout to 'portMAX_DELAY' in 'i2s_write'
               so you won't reach here unless you set other timeout value,
               if timeout detected, it means write operation failed. */
            ESP_LOGE(TAG, "[music] i2s read failed, %s", err_reason[ret == ESP_ERR_TIMEOUT]);
            abort();
        }
        /* Clear DMA buffer to avoid noise from legacy data in buffer */
        i2s_zero_dma_buffer(I2S_NUM);
        if (bytes_write > 0) {
            ESP_LOGI(TAG, "[music] i2s music played, %d bytes are written.", bytes_write);
        } else {
            ESP_LOGE(TAG, "[music] i2s music play falied.");
            abort();
        }
        vTaskDelay(1000 / portTICK_RATE_MS);
    }
    vTaskDelete(NULL);
}

#else
static void i2s_echo(void *args)
{
    int *mic_data = malloc(EXAMPLE_RECV_BUF_SIZE);
    if (!mic_data) {
        ESP_LOGE(TAG, "[echo] No memory for read data buffer");
        abort();
    }
    esp_err_t ret = ESP_OK;
    size_t bytes_read = 0;
    size_t bytes_write = 0;
    ESP_LOGI(TAG, "[echo] Echo start");

    while (1) {
        memset(mic_data, 0, EXAMPLE_RECV_BUF_SIZE);
        /* Read sample data from mic */
        ret = i2s_read(I2S_NUM, mic_data, EXAMPLE_RECV_BUF_SIZE, &bytes_read, 100);
        if (ret != ESP_OK) {
            ESP_LOGE(TAG, "[echo] i2s read failed, %s", err_reason[ret == ESP_ERR_TIMEOUT]);
            abort();
        }
        /* Write sample data to earphone */
        ret = i2s_write(I2S_NUM, mic_data, EXAMPLE_RECV_BUF_SIZE, &bytes_write, 100);
        if (ret != ESP_OK) {
            ESP_LOGE(TAG, "[echo] i2s write failed, %s", err_reason[ret == ESP_ERR_TIMEOUT]);
            abort();
        }
        if (bytes_read != bytes_write) {
            ESP_LOGW(TAG, "[echo] %d bytes read but only %d bytes are written", bytes_read, bytes_write);
        }
    }
    vTaskDelete(NULL);
}
#endif

void app_main(void)
{
    /* Initialize i2s peripheral */
    if (i2s_driver_init() != ESP_OK) {
        ESP_LOGE(TAG, "i2s driver init failed");
        abort();
    }
    /* Initialize i2c peripheral and config es8311 codec by i2c */
    if (es8311_codec_init() != ESP_OK) {
        ESP_LOGE(TAG, "es8311 codec init failed");
        abort();
    }
#if CONFIG_EXAMPLE_MODE_MUSIC
    /* Play a piece of music in music mode */
    xTaskCreate(i2s_music, "i2s_music", 4096, NULL, 5, NULL);
#else
    /* Echo the sound from MIC in echo mode */
    xTaskCreate(i2s_echo, "i2s_echo", 8192, NULL, 5, NULL);
#endif
}