alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-21 06:56:11 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
e899edd793
esp-idf/examples/zigbee/light_sample/light_switch/README.md

53 lines
2.1 KiB
Markdown
Raw Normal View History

Zigbee: Add light example * provide light example for acting as zigbee coordinator, router and end-device * remove unused componenent for example usage * remove unused variable * clean up unused header include for example * update the license header * update copyright * Add readme for instruction adding esp-zboss-lib component * esp-idf:update copy_right_check ignore file * CI: fix the ci check error from pipeline * sdkconfig: default set change for better user use * use Button (BOOT) as switch input * update the statemachine for debouncing * esp-zboss-lib: support lib 0.0.2 * fix warning issue from example
2021-10-20 06:45:55 -04:00
| Supported Targets | ESP32-H2 |
| ----------------- | -------- |
# Light Switch Example
(See the `README.md` file in the upper level 'examples' directory for more information about examples.)
This test code shows how to configure Zigbee end device and use it as a light switch
## Hardware Required
* One development board with ESP32-H2 SoC acting as Zigbee end device (loaded with light switch example)
* A USB cable for power supply and programming
* Choose another ESP32-H2 as Zigbee coordinator (see [light coordinator example](../light_coordinator))
* Choose another ESP32-H2 as Zigbee router (see [light bulb example](../light_bulb))
## Configure the project
Before project configuration and build, make sure to set the correct chip target using `idf.py set-target esp32h2`.
## Build and Flash
Build the project, flash it to the board, and start the monitor tool to view the serial output by running `idf.py -p PORT flash monitor`.
(To exit the serial monitor, type ``Ctrl-]``.)
## Example Output
As you run the example, you will see the following log:
light switch:
Zigbee example: add rcp and gateway * provide Zigbee rcp and Zigbee gateway example * minor comment fix for light example
2021-12-16 04:42:19 -05:00
I (9423) gpio: GPIO[9]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2
I (9523) ESP_ZB_SWITCH: status: -1
I (9523) ESP_ZB_SWITCH: Zigbee stack initialized
I (9523) ESP_ZB_SWITCH: Start network steering
I (11263) ESP_ZB_SWITCH: Joined network successfully (Extended PAN ID: f9:54:2d:01:a0:03:f7:84, PAN ID: 0xf5b5)
I (13433) ESP_ZB_SWITCH: Found bulb addr: 0x434a ep: 10
I (16433) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (17663) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (18693) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (19833) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (20753) ESP_ZB_SWITCH: Send ON/OFF toggle command
I (21363) ESP_ZB_SWITCH: Send ON/OFF toggle command
Zigbee: Add light example * provide light example for acting as zigbee coordinator, router and end-device * remove unused componenent for example usage * remove unused variable * clean up unused header include for example * update the license header * update copyright * Add readme for instruction adding esp-zboss-lib component * esp-idf:update copy_right_check ignore file * CI: fix the ci check error from pipeline * sdkconfig: default set change for better user use * use Button (BOOT) as switch input * update the statemachine for debouncing * esp-zboss-lib: support lib 0.0.2 * fix warning issue from example
2021-10-20 06:45:55 -04:00
## Light Control Functions
* By toggling the switch button (BOOT) on this board, the LED on the board loaded with the `light bulb` example will be on and off.
## Troubleshooting
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
Reference in New Issue Copy Permalink