esp-idf/components/driver/test/test_pcnt.c

651 lines
24 KiB
C
Raw Normal View History

2018-06-06 07:56:43 -04:00
/**
* this case is used for test PCNT
* prepare job for test environment UT_T1_PCNT:
* 1. prepare one ESP-WROOM-32 board and connect it to PC.
* 2. connect GPIO18 with GPIO4
* 3. GPIO5 connect to 3.3v
* 4. GPIO19 connect to GND
* 5. logic analyzer will help too if possible
*
* the GPIO18 is the pulse producer, the GPIO4 is the input GPIO
*/
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/portmacro.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "driver/periph_ctrl.h"
#include "driver/gpio.h"
#include "driver/pcnt.h"
#include "driver/ledc.h"
#include "esp_attr.h"
#include "esp_log.h"
#include "soc/gpio_sig_map.h"
#include "unity.h"
#include "esp32/rom/ets_sys.h"
2018-06-06 07:56:43 -04:00
#define PULSE_IO 18
#define PCNT_INPUT_IO 4
#define PCNT_CTRL_FLOATING_IO 5
#define PCNT_CTRL_GND_IO 19
#define HIGHEST_LIMIT 10
#define LOWEST_LIMIT 0
#define MAX_THRESHOLD 5
#define MIN_THRESHOLD 0
static xQueueHandle pcnt_evt_queue;
typedef struct {
int zero_times;
int h_limit;
int l_limit;
int h_threshold;
int l_threshold;
int filter_time;
} event_times;
/* use LEDC to produce pulse for PCNT
* the frequency of LEDC is 1000, so every second will get 1000 count values
* the PCNT count the LEDC pulse
* */
static void produce_pulse(void)
{
ledc_timer_config_t ledc_timer = {
.speed_mode = LEDC_HIGH_SPEED_MODE,
.timer_num = LEDC_TIMER_1,
.duty_resolution = LEDC_TIMER_10_BIT,
.freq_hz = 1,
};
ledc_timer_config(&ledc_timer);
ledc_channel_config_t ledc_channel = {
.speed_mode = LEDC_HIGH_SPEED_MODE,
.channel = LEDC_CHANNEL_1,
.timer_sel = LEDC_TIMER_1,
.intr_type = LEDC_INTR_DISABLE,
.gpio_num = PULSE_IO,
.duty = 100,
.hpoint = 0,
};
ledc_channel_config(&ledc_channel);
}
static void IRAM_ATTR pcnt_intr_handler(void *arg)
{
uint32_t intr_status = PCNT.int_st.val;
int i;
uint32_t status;
BaseType_t port_status = pdFALSE;
for (i = 0; i < PCNT_UNIT_MAX; i++) {
if (intr_status & (BIT(i))) {
status = PCNT.status_unit[i].val;
PCNT.int_clr.val = BIT(i);
xQueueSendFromISR(pcnt_evt_queue, &status, &port_status);
if (port_status == pdTRUE) {
portYIELD_FROM_ISR();
}
}
}
}
static void event_calculate(event_times* event)
{
int16_t test_counter = 0;
int times = 0;
BaseType_t port_status;
uint32_t status = 0;
while (times < 10) {
port_status = xQueueReceive(pcnt_evt_queue, &status, 1000 / portTICK_PERIOD_MS);
if (port_status == pdTRUE) {
event->filter_time++;
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("Current counter value :%d\n", test_counter);
if (status & PCNT_STATUS_THRES1_M) {
printf("THRES1 EVT\n");
event->h_threshold++;
}
if (status & PCNT_STATUS_THRES0_M) {
printf("THRES0 EVT\n");
event->l_threshold++;
}
if (status & PCNT_STATUS_L_LIM_M) {
printf("L_LIM EVT\n");
event->l_limit++;
}
if (status & PCNT_STATUS_H_LIM_M) {
printf("H_LIM EVT\n");
event->h_limit++;
}
if (status & PCNT_STATUS_ZERO_M) {
printf("ZERO EVT\n");
event->zero_times++;
}
} else {
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("Current counter value :%d\n", test_counter);
}
times++;
}
printf("%d, %d, %d, %d, %d, %d\n", event->h_threshold, event->l_threshold,
event->l_limit, event->h_limit, event->zero_times, event->filter_time);
}
/*
* There exist 2 kind of counting methods: positive and negative counting method
* 1. when control IO is high level, PCNT is positive counting mode
* 2. when control IO is low level, PCNT is positive negative mode
* the positive method standard is as below:
* ----------------------------------------------------------------------------------
* POS_ MODE | LCTRL_ MODE | HCTRL_ MODE | sig lh when ctrl=0 | sig lh when ctrl=1
* NEG_ MODE | | | |
* ===================================================================================
* 1 (inc) | 0 (-) | 0 (-) | Inc ctr | Inc ctr
* 2 (dec) | 0 (-) | 0 (-) | Dec ctr | Dec ctr
* 0 (-) | x | x | No action | No action
* 1 (inc) | 0 (-) | 1 (inv) | Inc ctr | Dec ctr
* 1 (inc) | 1 (inv) | 0 (-) | Dec ctr | Inc ctr
* 2 (dec) | 0 (-) | 1 (inv) | Dec ctr | Inc ctr
* 1 (inc) | 0 (-) | 2 (dis) | Inc ctr | No action
* 1 (inc) | 2 (dis) | 0 (-) | No action | Inc ctr
* -----------------------------------------------------------------------------------
* */
static void count_mode_test(gpio_num_t ctl_io)
{
int16_t test_counter;
//produce pulse, 100HZ
ledc_timer_config_t ledc_timer = {
.speed_mode = LEDC_HIGH_SPEED_MODE,
.timer_num = LEDC_TIMER_1,
.duty_resolution = LEDC_TIMER_10_BIT,
.freq_hz = 100,
};
ledc_timer_config(&ledc_timer);
ledc_channel_config_t ledc_channel = {
.speed_mode = LEDC_HIGH_SPEED_MODE,
.channel = LEDC_CHANNEL_1,
.timer_sel = LEDC_TIMER_1,
.intr_type = LEDC_INTR_DISABLE,
.gpio_num = PULSE_IO,
.duty = 100,
.hpoint = 0,
};
ledc_channel_config(&ledc_channel);
pcnt_config_t pcnt_config = {
.pulse_gpio_num = PCNT_INPUT_IO,
.ctrl_gpio_num = ctl_io,
.channel = PCNT_CHANNEL_0,
.unit = PCNT_UNIT_0,
.pos_mode = PCNT_COUNT_INC,
.neg_mode = PCNT_COUNT_DIS,
.lctrl_mode = PCNT_MODE_REVERSE,
.hctrl_mode = PCNT_MODE_KEEP,
.counter_h_lim = 101,
.counter_l_lim = -101,
};
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
int16_t result1[8] = {100, -100, 0, -100, 100, 100, 0, 100};
int16_t result2[8] = {100, -100, 0, 100, -100, -100, 100, 0};
int16_t *result;
if (gpio_get_level(pcnt_config.ctrl_gpio_num)) {
result = result1;
} else {
result = result2;
}
// 1, 0, 0, 0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_INC, PCNT_COUNT_DIS,
PCNT_MODE_KEEP, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[0]);
//2, 0, 0, 0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_DEC, PCNT_COUNT_DIS,
PCNT_MODE_KEEP, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[1]);
//0,0,0,0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_DIS, PCNT_COUNT_DIS,
PCNT_MODE_KEEP, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[2]);
//1,0,1,0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_INC, PCNT_COUNT_DIS,
PCNT_MODE_REVERSE, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[3]);
//1,0,0,1
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_INC, PCNT_COUNT_DIS,
PCNT_MODE_KEEP, PCNT_MODE_REVERSE));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[4]);
//2,0,0,1
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_DEC, PCNT_COUNT_DIS,
PCNT_MODE_REVERSE, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[5]);
//1,0,2,0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_INC, PCNT_COUNT_DIS,
PCNT_MODE_DISABLE, PCNT_MODE_KEEP));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[6]);
//1,0,0,2
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_mode(PCNT_UNIT_0, PCNT_CHANNEL_0,
PCNT_COUNT_INC, PCNT_COUNT_DIS,
PCNT_MODE_KEEP, PCNT_MODE_DISABLE));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("value: %d\n", test_counter);
TEST_ASSERT_INT16_WITHIN(1, test_counter, result[7]);
}
// test PCNT basic configuration
TEST_CASE("PCNT test config", "[pcnt][test_env=UT_T1_PCNT]")
{
pcnt_config_t pcnt_config = {
.pulse_gpio_num = PCNT_INPUT_IO,
.ctrl_gpio_num = PCNT_CTRL_FLOATING_IO,
.channel = PCNT_CHANNEL_0,
.unit = PCNT_UNIT_0,
.pos_mode = PCNT_COUNT_INC,
.neg_mode = PCNT_COUNT_DIS,
.lctrl_mode = PCNT_MODE_REVERSE,
.hctrl_mode = PCNT_MODE_KEEP,
.counter_h_lim = 100,
.counter_l_lim = 0,
};
// basic configuration
pcnt_config_t temp_pcnt_config = pcnt_config;
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
// test 8 units, from 0-7
pcnt_config = temp_pcnt_config;
pcnt_config.unit = PCNT_UNIT_MAX;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
for (int i = 0; i <= 7; i++) {
pcnt_config.unit = i;
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
}
// test channels
pcnt_config = temp_pcnt_config;
pcnt_config.channel = PCNT_CHANNEL_MAX;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
pcnt_config = temp_pcnt_config;
pcnt_config.pulse_gpio_num = -1;
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
pcnt_config = temp_pcnt_config;
pcnt_config.pulse_gpio_num = 41;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
// test pulse_gpio_num and ctrl_gpio_num is the same
pcnt_config = temp_pcnt_config;
pcnt_config.pulse_gpio_num = PCNT_INPUT_IO;
pcnt_config.ctrl_gpio_num = PCNT_INPUT_IO;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
pcnt_config = temp_pcnt_config;
pcnt_config.pos_mode = PCNT_COUNT_MAX;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
pcnt_config = temp_pcnt_config;
pcnt_config.hctrl_mode = PCNT_MODE_MAX;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
pcnt_config = temp_pcnt_config;
pcnt_config.lctrl_mode = PCNT_MODE_MAX;
TEST_ASSERT_NOT_NULL((void *)pcnt_unit_config(&pcnt_config));
}
/* PCNT basic property:
* 1. pause counter
* 2. resume counter
* 3. clear counter
* 4. check the counter value*/
TEST_CASE("PCNT basic function test", "[pcnt][test_env=UT_T1_PCNT]")
{
int16_t test_counter;
int16_t time = 0;
int clear_count = 0;
int resume_count = 0;
int temp_value = 0;
pcnt_config_t pcnt_config = {
.pulse_gpio_num = PCNT_INPUT_IO,
.ctrl_gpio_num = PCNT_CTRL_FLOATING_IO,
.channel = PCNT_CHANNEL_0,
.unit = PCNT_UNIT_0,
.pos_mode = PCNT_COUNT_INC,
.neg_mode = PCNT_COUNT_DIS,
.lctrl_mode = PCNT_MODE_REVERSE,
.hctrl_mode = PCNT_MODE_KEEP,
.counter_h_lim = 10,
.counter_l_lim = -10,
};
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
// use LEDC to produce the pulse, then the PCNT to count it
produce_pulse();
// initialize first, the initail value should be 0
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
TEST_ASSERT_EQUAL_INT16(test_counter, 0);
// resume the PCNT
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
TEST_ASSERT_EQUAL_INT16(test_counter, 0);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
TEST_ASSERT_EQUAL_INT16(test_counter, 0);
//count now
while (time != 10) {
vTaskDelay(1001 / portTICK_RATE_MS); // in case of can't wait to get counter(edge effect)
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("COUNT: %d\n", test_counter);
TEST_ASSERT_NOT_EQUAL(test_counter, temp_value);
temp_value = test_counter;
if (test_counter == 5 || test_counter == -5) {
//test clear
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
TEST_ASSERT_EQUAL_INT16(test_counter, 0);
clear_count++;
}
if (test_counter == 0) {
//test pause
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("PAUSE: %d\n", test_counter);
TEST_ASSERT_EQUAL_INT16(test_counter, 0);
// test resume
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
vTaskDelay(1000 / portTICK_RATE_MS);
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
printf("RESUME: %d\n", test_counter);
TEST_ASSERT_EQUAL_INT16(test_counter, (gpio_get_level(PCNT_CTRL_FLOATING_IO) > 0) ? (1) : -1);
resume_count++;
}
time++;
}
TEST_ASSERT_EQUAL_INT16(clear_count, 2);
TEST_ASSERT_EQUAL_INT16(resume_count, 2);
}
/**
* there are 4 situations will be tested:
* 1. set event to interrupt triggered
* 2. disable interrupt to stop triggering interrupt
* 3. enable interrupt to interrupt triggered again
* 4. disable event to stop triggering interrupt
*
* PCNT interrupt type:
* 1. PCNT_EVT_THRES_1
* 2. PCNT_EVT_THRES_0
* 3. PCNT_EVT_ZERO
* 4. PCNT_EVT_H_LIM
* 5. PCNT_EVT_L_LIM
* */
// set it ignore: need to debug
TEST_CASE("PCNT interrupt method test(control IO is high)", "[pcnt][test_env=UT_T1_PCNT][timeout=120][ignore]")
2018-06-06 07:56:43 -04:00
{
pcnt_config_t config = {
.pulse_gpio_num = PCNT_INPUT_IO,
.ctrl_gpio_num = PCNT_CTRL_FLOATING_IO,
.channel = PCNT_CHANNEL_0,
.unit = PCNT_UNIT_0,
.pos_mode = PCNT_COUNT_INC,
.neg_mode = PCNT_COUNT_DIS,
.lctrl_mode = PCNT_MODE_REVERSE,
.hctrl_mode = PCNT_MODE_KEEP,
.counter_h_lim = 5,
.counter_l_lim = 0,
};
TEST_ESP_OK(pcnt_unit_config(&config));
produce_pulse();
event_times event = {
.zero_times = 0,
.h_limit = 0,
.l_limit = 0,
.h_threshold = 0,
.l_threshold = 0,
.filter_time = 0,
};
//interrupt set
TEST_ESP_OK(pcnt_set_filter_value(PCNT_UNIT_0, 2));
TEST_ESP_OK(pcnt_filter_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_1, 4)); // when arrive to max threshold trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_1));
TEST_ESP_OK(pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_0, 1)); // when arrive to minimum threshold trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_0));
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_ZERO));
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_H_LIM)); // when arrive to max limit trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_L_LIM)); // when arrive to minimum limit trigger
// to initialize for PCNT
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_isr_register(pcnt_intr_handler, NULL, 0, NULL));
TEST_ESP_OK(pcnt_intr_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
pcnt_evt_queue = xQueueCreate(10, sizeof(uint32_t));
// test event
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 2);
2018-06-06 07:56:43 -04:00
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 2);
TEST_ASSERT(event.l_limit == 0);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 2);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 2);
TEST_ASSERT_INT_WITHIN(3, event.filter_time, 4);
2018-06-06 07:56:43 -04:00
// test interrupt disable
TEST_ESP_OK(pcnt_intr_disable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
// for the original control io disable interrupt status
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 2);
2018-06-06 07:56:43 -04:00
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 2);
TEST_ASSERT(event.l_limit == 0);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 2);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 2);
TEST_ASSERT_INT_WITHIN(3, event.filter_time, 4);
2018-06-06 07:56:43 -04:00
// enable the intr
TEST_ESP_OK(pcnt_intr_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 4);
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 4);
TEST_ASSERT(event.l_limit == 0);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 4);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 4);
TEST_ASSERT_INT_WITHIN(3, event.filter_time, 10);
2018-06-06 07:56:43 -04:00
// disable part of events
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_ZERO));
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_L_LIM));
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_THRES_0));
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 5);
2018-06-06 07:56:43 -04:00
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 4);
TEST_ASSERT(event.l_limit == 0);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 6);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 4);
TEST_ASSERT_INT_WITHIN(3, event.filter_time, 14);
2018-06-06 07:56:43 -04:00
pcnt_isr_service_uninstall();
}
// set it ignore: need to debug
TEST_CASE("PCNT interrupt method test(control IO is low)", "[pcnt][test_env=UT_T1_PCNT][timeout=120][ignore]")
2018-06-06 07:56:43 -04:00
{
pcnt_config_t config = {
.pulse_gpio_num = PCNT_INPUT_IO,
.ctrl_gpio_num = PCNT_CTRL_GND_IO,
.channel = PCNT_CHANNEL_0,
.unit = PCNT_UNIT_0,
.pos_mode = PCNT_COUNT_INC,
.neg_mode = PCNT_COUNT_DIS,
.lctrl_mode = PCNT_MODE_REVERSE,
.hctrl_mode = PCNT_MODE_KEEP,
.counter_h_lim = 0,
.counter_l_lim = -5,
};
TEST_ESP_OK(pcnt_unit_config(&config));
produce_pulse();
event_times event = {
.zero_times = 0,
.h_limit = 0,
.l_limit = 0,
.h_threshold = 0,
.l_threshold = 0,
.filter_time = 0,
};
//interrupt set
TEST_ESP_OK(pcnt_set_filter_value(PCNT_UNIT_0, 2));
TEST_ESP_OK(pcnt_filter_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_1, -4)); // when arrive to max threshold trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_1));
TEST_ESP_OK(pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_0, 0)); // when arrive to minimum threshold trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_0));
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_ZERO));
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_H_LIM)); // when arrive to max limit trigger
TEST_ESP_OK(pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_L_LIM)); // when arrive to minimum limit trigger
// to initialize for PCNT
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_isr_register(pcnt_intr_handler, NULL, 0, NULL));
TEST_ESP_OK(pcnt_intr_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
pcnt_evt_queue = xQueueCreate(10, sizeof(uint32_t));
// test event
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 1);
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 1);
TEST_ASSERT_INT_WITHIN(2, event.l_limit, 1);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 0);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 1);
TEST_ASSERT_INT_WITHIN(2, event.filter_time, 2);
// test interrupt disable
TEST_ESP_OK(pcnt_intr_disable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
// for the original control io disable interrupt status
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 1);
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 1);
TEST_ASSERT_INT_WITHIN(2, event.l_limit, 1);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 0);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 1);
TEST_ASSERT_INT_WITHIN(2, event.filter_time, 2);
// enable the intr
pcnt_unit_config(&config);
TEST_ESP_OK(pcnt_intr_enable(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 2);
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 3);
TEST_ASSERT_INT_WITHIN(2, event.l_limit, 2);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 0);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 2);
TEST_ASSERT_INT_WITHIN(2, event.filter_time, 6);
// disable part of events
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_ZERO));
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_L_LIM));
TEST_ESP_OK(pcnt_event_disable(PCNT_UNIT_0, PCNT_EVT_THRES_0));
event_calculate(&event);
TEST_ASSERT_INT_WITHIN(2, event.h_threshold, 4);
TEST_ASSERT_INT_WITHIN(2, event.l_threshold, 3);
TEST_ASSERT_INT_WITHIN(2, event.l_limit, 2);
TEST_ASSERT_INT_WITHIN(2, event.h_limit, 0);
TEST_ASSERT_INT_WITHIN(2, event.zero_times, 2);
TEST_ASSERT_INT_WITHIN(2, event.filter_time, 8);
pcnt_isr_service_uninstall();
}
TEST_CASE("PCNT counting mode test", "[pcnt][test_env=UT_T1_PCNT]")
{
printf("PCNT mode test for positive count\n");
count_mode_test(PCNT_CTRL_FLOATING_IO);
printf("PCNT mode test for negative count\n");
count_mode_test(PCNT_CTRL_GND_IO);
}