esp-idf/components/freemodbus/modbus/functions/mbfunccoils_m.c

392 lines
14 KiB
C
Raw Normal View History

freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfunccoils_m.c,v 1.60 2013/10/12 15:10:12 Armink Add Master Functions
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb_m.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
#include "mbutils.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
#define MB_PDU_REQ_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_REQ_READ_SIZE ( 4 )
#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 0 )
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
#define MB_PDU_REQ_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_REQ_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_REQ_WRITE_SIZE ( 4 )
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
#define MB_PDU_REQ_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_REQ_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
#define MB_PDU_REQ_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
#define MB_PDU_REQ_WRITE_MUL_SIZE_MIN ( 5 )
#define MB_PDU_REQ_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_MUL_SIZE ( 5 )
/* ----------------------- Static functions ---------------------------------*/
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
/* ----------------------- Start implementation -----------------------------*/
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED || MB_MASTER_TCP_ENABLED
#if MB_FUNC_READ_COILS_ENABLED
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
/**
* This function will request read coil.
*
* @param ucSndAddr salve address
* @param usCoilAddr coil start address
* @param usNCoils coil total number
* @param lTimeOut timeout (-1 will waiting forever)
*
* @return error code
*/
eMBMasterReqErrCode
eMBMasterReqReadCoils( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usNCoils, LONG lTimeOut )
{
UCHAR *ucMBFrame;
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
else
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
vMBMasterSetDestAddress(ucSndAddr);
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_COILS;
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usCoilAddr >> 8;
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usCoilAddr;
ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF ] = usNCoils >> 8;
ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF + 1] = usNCoils;
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
eErrStatus = eMBMasterWaitRequestFinish( );
}
return eErrStatus;
}
eMBException
eMBMasterFuncReadCoils( UCHAR * pucFrame, USHORT * usLen )
{
UCHAR *ucMBFrame;
USHORT usRegAddress;
USHORT usCoilCount;
UCHAR ucByteCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, and it's read mode. This request don't need execute. */
if ( xMBMasterRequestIsBroadcast() )
{
eStatus = MB_EX_NONE;
}
else if ( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
usRegAddress++;
usCoilCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF] << 8 );
usCoilCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_COILCNT_OFF + 1] );
/* Test if the quantity of coils is a multiple of 8. If not last
* byte is only partially field with unused coils set to zero. */
if( ( usCoilCount & 0x0007 ) != 0 )
{
ucByteCount = ( UCHAR )( usCoilCount / 8 + 1 );
}
else
{
ucByteCount = ( UCHAR )( usCoilCount / 8 );
}
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usCoilCount >= 1 ) &&
( ucByteCount == pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] ) )
{
/* Make callback to fill the buffer. */
eRegStatus = eMBMasterRegCoilsCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usCoilCount, MB_REG_READ );
/* If an error occurred convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#if MB_FUNC_WRITE_COIL_ENABLED > 0
/**
* This function will request write one coil.
*
* @param ucSndAddr salve address
* @param usCoilAddr coil start address
* @param usCoilData data to be written
* @param lTimeOut timeout (-1 will waiting forever)
*
* @return error code
*
* @see eMBMasterReqWriteMultipleCoils
*/
eMBMasterReqErrCode
eMBMasterReqWriteCoil( UCHAR ucSndAddr, USHORT usCoilAddr, USHORT usCoilData, LONG lTimeOut )
{
UCHAR *ucMBFrame;
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
else if ( ( usCoilData != 0xFF00 ) && ( usCoilData != 0x0000 ) ) eErrStatus = MB_MRE_ILL_ARG;
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
else
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
vMBMasterSetDestAddress(ucSndAddr);
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_SINGLE_COIL;
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF] = usCoilAddr >> 8;
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF + 1] = usCoilAddr;
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF ] = usCoilData >> 8;
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF + 1] = usCoilData;
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_SIZE );
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
eErrStatus = eMBMasterWaitRequestFinish( );
}
return eErrStatus;
}
eMBException
eMBMasterFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
UCHAR ucBuf[2];
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
usRegAddress++;
if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
{
ucBuf[1] = 0;
if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
{
ucBuf[0] = 1;
}
else
{
ucBuf[0] = 0;
}
eRegStatus =
eMBMasterRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif // #if MB_FUNC_WRITE_COIL_ENABLED > 0
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
/**
* This function will request write multiple coils.
*
* @param ucSndAddr salve address
* @param usCoilAddr coil start address
* @param usNCoils coil total number
* @param usCoilData data to be written
* @param lTimeOut timeout (-1 will waiting forever)
*
* @return error code
*
* @see eMBMasterReqWriteCoil
*/
eMBMasterReqErrCode
eMBMasterReqWriteMultipleCoils( UCHAR ucSndAddr,
USHORT usCoilAddr, USHORT usNCoils, UCHAR * pucDataBuffer, LONG lTimeOut)
{
UCHAR *ucMBFrame;
USHORT usRegIndex = 0;
UCHAR ucByteCount;
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
else if ( usNCoils > MB_PDU_REQ_WRITE_MUL_COILCNT_MAX ) eErrStatus = MB_MRE_ILL_ARG;
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
else
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
vMBMasterSetDestAddress(ucSndAddr);
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_MULTIPLE_COILS;
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] = usCoilAddr >> 8;
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] = usCoilAddr;
ucMBFrame[MB_PDU_REQ_WRITE_MUL_COILCNT_OFF] = usNCoils >> 8;
ucMBFrame[MB_PDU_REQ_WRITE_MUL_COILCNT_OFF + 1] = usNCoils ;
if( ( usNCoils & 0x0007 ) != 0 )
{
ucByteCount = ( UCHAR )( usNCoils / 8 + 1 );
}
else
{
ucByteCount = ( UCHAR )( usNCoils / 8 );
}
ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF] = ucByteCount;
ucMBFrame += MB_PDU_REQ_WRITE_MUL_VALUES_OFF;
while( ucByteCount > usRegIndex)
{
*ucMBFrame++ = pucDataBuffer[usRegIndex++];
}
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_MUL_SIZE_MIN + ucByteCount );
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
eErrStatus = eMBMasterWaitRequestFinish( );
}
return eErrStatus;
}
eMBException
eMBMasterFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usCoilCnt;
UCHAR ucByteCount;
UCHAR ucByteCountVerify;
UCHAR *ucMBFrame;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
/* If this request is broadcast, the *usLen is not need check. */
if( ( *usLen == MB_PDU_FUNC_WRITE_MUL_SIZE ) || xMBMasterRequestIsBroadcast() )
{
vMBMasterGetPDUSndBuf(&ucMBFrame);
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
ucByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
/* Compute the number of expected bytes in the request. */
if( ( usCoilCnt & 0x0007 ) != 0 )
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
}
else
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
}
if( ( usCoilCnt >= 1 ) && ( ucByteCountVerify == ucByteCount ) )
{
eRegStatus =
eMBMasterRegCoilsCB( &ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
usRegAddress, usCoilCnt, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif // #if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
#endif // #if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0