esp-idf/examples/protocols/http_server/file_serving/main/mount.c

161 lines
5.3 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Unlicense OR CC0-1.0
*/
/* HTTP File Server Example, SD card / SPIFFS mount functions.
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>
#include "esp_log.h"
#include "esp_err.h"
#include "esp_vfs_fat.h"
#include "esp_spiffs.h"
#include "sdkconfig.h"
#include "soc/soc_caps.h"
#include "driver/sdspi_host.h"
#include "driver/spi_common.h"
#if SOC_SDMMC_HOST_SUPPORTED
#include "driver/sdmmc_host.h"
#endif
#include "sdmmc_cmd.h"
#include "file_serving_example_common.h"
static const char *TAG = "example_mount";
#ifdef CONFIG_EXAMPLE_MOUNT_SD_CARD
esp_err_t example_mount_storage(const char* base_path)
{
ESP_LOGI(TAG, "Initializing SD card");
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
#ifdef CONFIG_EXAMPLE_FORMAT_IF_MOUNT_SDCARD_FAILED
.format_if_mount_failed = true,
#else
.format_if_mount_failed = false,
#endif // CONFIG_EXAMPLE_FORMAT_IF_MOUNT_SDCARD_FAILED
.max_files = 5,
.allocation_unit_size = 16 * 1024
};
esp_err_t ret;
sdmmc_card_t* card;
#ifdef CONFIG_EXAMPLE_USE_SDMMC_HOST
ESP_LOGI(TAG, "Using SDMMC peripheral");
sdmmc_host_t host = SDMMC_HOST_DEFAULT();
// This initializes the slot without card detect (CD) and write protect (WP) signals.
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
// To use 1-line SD mode, change this to 1:
slot_config.width = 4;
#ifdef SOC_SDMMC_USE_GPIO_MATRIX
// For chips which support GPIO Matrix for SDMMC peripheral, specify the pins.
slot_config.clk = CONFIG_EXAMPLE_PIN_CLK;
slot_config.cmd = CONFIG_EXAMPLE_PIN_CMD;
slot_config.d0 = CONFIG_EXAMPLE_PIN_D0;
slot_config.d1 = CONFIG_EXAMPLE_PIN_D1;
slot_config.d2 = CONFIG_EXAMPLE_PIN_D2;
slot_config.d3 = CONFIG_EXAMPLE_PIN_D3;
#endif // SOC_SDMMC_USE_GPIO_MATRIX
// Enable internal pullups on enabled pins. The internal pullups
// are insufficient however, please make sure 10k external pullups are
// connected on the bus. This is for debug / example purpose only.
slot_config.flags |= SDMMC_SLOT_FLAG_INTERNAL_PULLUP;
ret = esp_vfs_fat_sdmmc_mount(base_path, &host, &slot_config, &mount_config, &card);
#else // CONFIG_EXAMPLE_USE_SDMMC_HOST
ESP_LOGI(TAG, "Using SPI peripheral");
sdmmc_host_t host = SDSPI_HOST_DEFAULT();
spi_bus_config_t bus_cfg = {
.mosi_io_num = CONFIG_EXAMPLE_PIN_MOSI,
.miso_io_num = CONFIG_EXAMPLE_PIN_MISO,
.sclk_io_num = CONFIG_EXAMPLE_PIN_CLK,
.quadwp_io_num = -1,
.quadhd_io_num = -1,
.max_transfer_sz = 4000,
};
ret = spi_bus_initialize(host.slot, &bus_cfg, SDSPI_DEFAULT_DMA);
if (ret != ESP_OK) {
ESP_LOGE(TAG, "Failed to initialize bus.");
return ret;
}
// This initializes the slot without card detect (CD) and write protect (WP) signals.
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT();
slot_config.gpio_cs = CONFIG_EXAMPLE_PIN_CS;
slot_config.host_id = host.slot;
ret = esp_vfs_fat_sdspi_mount(base_path, &host, &slot_config, &mount_config, &card);
#endif // !CONFIG_EXAMPLE_USE_SDMMC_HOST
if (ret != ESP_OK){
if (ret == ESP_FAIL) {
ESP_LOGE(TAG, "Failed to mount filesystem. "
"If you want the card to be formatted, set the EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option.");
} else {
ESP_LOGE(TAG, "Failed to initialize the card (%s). "
"Make sure SD card lines have pull-up resistors in place.", esp_err_to_name(ret));
}
return ret;
}
sdmmc_card_print_info(stdout, card);
return ESP_OK;
}
#else // CONFIG_EXAMPLE_MOUNT_SD_CARD
/* Function to initialize SPIFFS */
esp_err_t example_mount_storage(const char* base_path)
{
ESP_LOGI(TAG, "Initializing SPIFFS");
esp_vfs_spiffs_conf_t conf = {
.base_path = base_path,
.partition_label = NULL,
.max_files = 5, // This sets the maximum number of files that can be open at the same time
.format_if_mount_failed = true
};
esp_err_t ret = esp_vfs_spiffs_register(&conf);
if (ret != ESP_OK) {
if (ret == ESP_FAIL) {
ESP_LOGE(TAG, "Failed to mount or format filesystem");
} else if (ret == ESP_ERR_NOT_FOUND) {
ESP_LOGE(TAG, "Failed to find SPIFFS partition");
} else {
ESP_LOGE(TAG, "Failed to initialize SPIFFS (%s)", esp_err_to_name(ret));
}
return ret;
}
size_t total = 0, used = 0;
ret = esp_spiffs_info(NULL, &total, &used);
if (ret != ESP_OK) {
ESP_LOGE(TAG, "Failed to get SPIFFS partition information (%s)", esp_err_to_name(ret));
return ret;
}
ESP_LOGI(TAG, "Partition size: total: %d, used: %d", total, used);
return ESP_OK;
}
#endif // !CONFIG_EXAMPLE_MOUNT_SD_CARD