esp-idf/components/lwip/port/esp32/netif/ethernetif.c

243 lines
7.7 KiB
C
Raw Normal View History

/**
* @file
* Ethernet Interface Skeleton
*
*/
/*
* Copyright (c) 2001-2004 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#include "lwip/opt.h"
#include "lwip/def.h"
#include "lwip/mem.h"
#include "lwip/pbuf.h"
#include "lwip/stats.h"
#include "lwip/snmp.h"
#include "lwip/ethip6.h"
#include "netif/etharp.h"
#include <stdio.h>
#include <string.h>
#include "esp_eth.h"
#include "esp_netif.h"
#include "esp_netif_net_stack.h"
components/esp_common: added esp_macros.h that aims to hold useful macros esp_common/esp_compiler: renamed esp_macros file to a more specific one esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate components/freertos: placed likely macros around port and critical sections component/freertos: placed likely macros on lists module components/freertos: placed unlikely macros inside of assertion points, they likely wont fail components/freertos: added likely macros on queue modules FreeRTOS queues are one of most hot code path, because to queues itself tend to be used a lot by the applications, besides that, queues are the basic primitive to form both mutexes and semaphores, The focus here is to place likely macros inside lowest level send and receive routines, since they're common from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue) components/lwip: placed likely/unlikey on net-interfaces code components/fatfs: added unlikely macros on disk drivers code components/spiffs: added unlikely macros on low level fs driver components/freertos: added likely/unlikely macros on timers and ticker freertos/event_group: placed likely/unlikely macros on hot event group code paths components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc components/bt: placed unlikely macros around bt HCI functions calling components/lwip: added likely/unlikely macros on OS port code section components/freertos: fix code style on tick handler
2019-10-15 17:01:05 -04:00
#include "esp_compiler.h"
/* Define those to better describe your network interface. */
#define IFNAME0 'e'
#define IFNAME1 'n'
/**
2019-04-10 04:24:50 -04:00
* @brief Free resources allocated in L2 layer
*
2019-04-10 04:24:50 -04:00
* @param buf memory alloc in L2 layer
* @note this function is also the callback when invoke pbuf_free
*/
static void ethernet_free_rx_buf_l2(struct netif *netif, void *buf)
{
2019-04-10 04:24:50 -04:00
free(buf);
}
2019-04-10 04:24:50 -04:00
/**
* In this function, the hardware should be initialized.
* Invoked by ethernetif_init().
*
* @param netif lwip network interface which has already been initialized
*/
static void ethernet_low_level_init(struct netif *netif)
{
/* set MAC hardware address length */
netif->hwaddr_len = ETHARP_HWADDR_LEN;
2019-04-10 04:24:50 -04:00
/* maximum transfer unit */
netif->mtu = 1500;
2019-04-10 04:24:50 -04:00
/* device capabilities */
/* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */
netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP;
#if ESP_LWIP
#if LWIP_IGMP
2019-04-10 04:24:50 -04:00
netif->flags |= NETIF_FLAG_IGMP;
#endif
#endif
#if ESP_IPV6
#if LWIP_IPV6 && LWIP_IPV6_MLD
netif->flags |= NETIF_FLAG_MLD6;
#endif
#endif
}
/**
2019-04-10 04:24:50 -04:00
* @brief This function should do the actual transmission of the packet. The packet is
* contained in the pbuf that is passed to the function. This pbuf might be chained.
*
2019-04-10 04:24:50 -04:00
* @param netif lwip network interface structure for this ethernetif
* @param p MAC packet to send (e.g. IP packet including MAC addresses and type)
* @return err_t ERR_OK if the packet has been sent to Ethernet DMA buffer successfully
* ERR_MEM if private data couldn't be allocated
* ERR_IF if netif is not supported
* ERR_ABORT if there's some wrong when send pbuf payload to DMA buffer
*/
2019-04-10 04:24:50 -04:00
static err_t ethernet_low_level_output(struct netif *netif, struct pbuf *p)
{
2019-04-10 04:24:50 -04:00
struct pbuf *q = p;
esp_netif_t *esp_netif = esp_netif_get_handle_from_netif_impl(netif);
2019-04-10 04:24:50 -04:00
esp_err_t ret = ESP_FAIL;
if (!esp_netif) {
LWIP_DEBUGF(NETIF_DEBUG, ("corresponding esp-netif is NULL: netif=%p pbuf=%p len=%d\n", netif, p, p->len));
2019-04-10 04:24:50 -04:00
return ERR_IF;
}
2019-04-10 04:24:50 -04:00
if (q->next == NULL) {
ret = esp_netif_transmit(esp_netif, q->payload, q->len);
} else {
2019-04-10 04:24:50 -04:00
LWIP_DEBUGF(PBUF_DEBUG, ("low_level_output: pbuf is a list, application may has bug"));
q = pbuf_alloc(PBUF_RAW_TX, p->tot_len, PBUF_RAM);
if (q != NULL) {
#if ESP_LWIP
/* This pbuf RAM was not allocated on layer2, no extra free operation needed in pbuf_free */
q->l2_owner = NULL;
q->l2_buf = NULL;
#endif
pbuf_copy(q, p);
} else {
return ERR_MEM;
}
ret = esp_netif_transmit(esp_netif, q->payload, q->len);
2019-04-10 04:24:50 -04:00
/* content in payload has been copied to DMA buffer, it's safe to free pbuf now */
pbuf_free(q);
}
/* Check error */
if (likely(ret == ESP_OK)) {
2019-04-10 04:24:50 -04:00
return ERR_OK;
} else if (ret == ESP_ERR_NO_MEM) {
return ERR_MEM;
}
return ERR_IF;
}
/**
2019-04-10 04:24:50 -04:00
* @brief This function should be called when a packet is ready to be read
* from the interface. It uses the function low_level_input() that
* should handle the actual reception of bytes from the network
* interface. Then the type of the received packet is determined and
* the appropriate input function is called.
*
2019-04-10 04:24:50 -04:00
* @param netif lwip network interface structure for this ethernetif
* @param buffer ethernet buffer
* @param len length of buffer
*/
void ethernetif_input(void *h, void *buffer, size_t len, void *eb)
{
struct netif *netif = h;
2019-04-10 04:24:50 -04:00
struct pbuf *p;
components/esp_common: added esp_macros.h that aims to hold useful macros esp_common/esp_compiler: renamed esp_macros file to a more specific one esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate components/freertos: placed likely macros around port and critical sections component/freertos: placed likely macros on lists module components/freertos: placed unlikely macros inside of assertion points, they likely wont fail components/freertos: added likely macros on queue modules FreeRTOS queues are one of most hot code path, because to queues itself tend to be used a lot by the applications, besides that, queues are the basic primitive to form both mutexes and semaphores, The focus here is to place likely macros inside lowest level send and receive routines, since they're common from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue) components/lwip: placed likely/unlikey on net-interfaces code components/fatfs: added unlikely macros on disk drivers code components/spiffs: added unlikely macros on low level fs driver components/freertos: added likely/unlikely macros on timers and ticker freertos/event_group: placed likely/unlikely macros on hot event group code paths components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc components/bt: placed unlikely macros around bt HCI functions calling components/lwip: added likely/unlikely macros on OS port code section components/freertos: fix code style on tick handler
2019-10-15 17:01:05 -04:00
if (unlikely(buffer == NULL || !netif_is_up(netif))) {
2019-04-10 04:24:50 -04:00
if (buffer) {
ethernet_free_rx_buf_l2(netif, buffer);
2019-04-10 04:24:50 -04:00
}
return;
}
2019-04-10 04:24:50 -04:00
/* acquire new pbuf, type: PBUF_REF */
p = pbuf_alloc(PBUF_RAW, len, PBUF_REF);
if (p == NULL) {
ethernet_free_rx_buf_l2(netif, buffer);
2019-04-10 04:24:50 -04:00
return;
}
p->payload = buffer;
#if ESP_LWIP
p->l2_owner = netif;
p->l2_buf = buffer;
#endif
2019-04-10 04:24:50 -04:00
/* full packet send to tcpip_thread to process */
components/esp_common: added esp_macros.h that aims to hold useful macros esp_common/esp_compiler: renamed esp_macros file to a more specific one esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate components/freertos: placed likely macros around port and critical sections component/freertos: placed likely macros on lists module components/freertos: placed unlikely macros inside of assertion points, they likely wont fail components/freertos: added likely macros on queue modules FreeRTOS queues are one of most hot code path, because to queues itself tend to be used a lot by the applications, besides that, queues are the basic primitive to form both mutexes and semaphores, The focus here is to place likely macros inside lowest level send and receive routines, since they're common from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue) components/lwip: placed likely/unlikey on net-interfaces code components/fatfs: added unlikely macros on disk drivers code components/spiffs: added unlikely macros on low level fs driver components/freertos: added likely/unlikely macros on timers and ticker freertos/event_group: placed likely/unlikely macros on hot event group code paths components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc components/bt: placed unlikely macros around bt HCI functions calling components/lwip: added likely/unlikely macros on OS port code section components/freertos: fix code style on tick handler
2019-10-15 17:01:05 -04:00
if (unlikely(netif->input(p, netif) != ERR_OK)) {
2019-04-10 04:24:50 -04:00
LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
pbuf_free(p);
}
/* the pbuf will be free in upper layer, eg: ethernet_input */
}
/**
2019-04-10 04:24:50 -04:00
* Set up the network interface. It calls the function low_level_init() to do the
* actual init work of the hardware.
*
* This function should be passed as a parameter to netif_add().
*
* @param netif the lwip network interface structure for this ethernetif
2019-04-10 04:24:50 -04:00
* @return ERR_OK if the ethernetif is initialized
*/
2019-04-10 04:24:50 -04:00
err_t ethernetif_init(struct netif *netif)
{
2019-04-10 04:24:50 -04:00
LWIP_ASSERT("netif != NULL", (netif != NULL));
/* Have to get the esp-netif handle from netif first and then driver==ethernet handle from there */
esp_netif_t *esp_netif = esp_netif_get_handle_from_netif_impl(netif);
esp_eth_handle_t eth_handle = esp_netif_get_io_driver(esp_netif);
2019-04-10 04:24:50 -04:00
/* Initialize interface hostname */
#if LWIP_NETIF_HOSTNAME
#if ESP_LWIP
if (esp_netif_get_hostname(esp_netif, &netif->hostname) != ESP_OK) {
netif->hostname = CONFIG_LWIP_LOCAL_HOSTNAME;
}
#else
2019-04-10 04:24:50 -04:00
netif->hostname = "lwip";
#endif
#endif /* LWIP_NETIF_HOSTNAME */
2019-04-10 04:24:50 -04:00
/* Initialize the snmp variables and counters inside the struct netif. */
eth_speed_t speed;
2019-04-10 04:24:50 -04:00
esp_eth_ioctl(eth_handle, ETH_CMD_G_SPEED, &speed);
if (speed == ETH_SPEED_100M) {
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
} else {
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
}
2019-04-10 04:24:50 -04:00
netif->name[0] = IFNAME0;
netif->name[1] = IFNAME1;
netif->output = etharp_output;
#if LWIP_IPV6
2019-04-10 04:24:50 -04:00
netif->output_ip6 = ethip6_output;
#endif /* LWIP_IPV6 */
2019-04-10 04:24:50 -04:00
netif->linkoutput = ethernet_low_level_output;
netif->l2_buffer_free_notify = ethernet_free_rx_buf_l2;
2019-04-10 04:24:50 -04:00
ethernet_low_level_init(netif);
2019-04-10 04:24:50 -04:00
return ERR_OK;
}