esp-idf/docs/en/get-started/windows-setup.rst

133 lines
6.2 KiB
ReStructuredText
Raw Normal View History

***********************************************
Standard Setup of Toolchain for Windows
***********************************************
:link_to_translation:`zh_CN:[中文]`
2017-03-26 18:01:52 -04:00
.. only:: esp32
.. note::
Currently only 64-bit versions of Windows are supported. 32-bit Windows can use the :doc:`Legacy GNU Make Build System<../get-started-legacy/windows-setup>`.
2017-03-26 18:01:52 -04:00
Introduction
============
ESP-IDF requires some prerequisite tools to be installed so you can build firmware for supported chips. The prerequisite tools include Python, Git, cross-compilers, CMake and Ninja build tools.
2017-03-26 18:01:52 -04:00
For this Getting Started we're going to use the Command Prompt, but after ESP-IDF is installed you can use :doc:`Eclipse <eclipse-setup>` or another graphical IDE with CMake support instead.
2017-03-26 18:01:52 -04:00
.. only:: esp32
.. note::
Previous versions of ESP-IDF used the :doc:`Legacy GNU Make Build System<../get-started-legacy/windows-setup>` and MSYS2_ Unix compatibility environment. This is no longer required, ESP-IDF can be used from the Windows Command Prompt.
2017-03-26 18:01:52 -04:00
.. note::
Limitation: the installation path of Python or ESP-IDF must not contain white spaces or parentheses.
Limitation: the installation path of Python or ESP-IDF should not contain special characters (non-ASCII) unless the operating system is configured with "Unicode UTF-8" support.
System Administrator can enable the support via Control Panel - Change date, time, or number formats - Administrative tab - Change system locale - check the option "Beta: Use Unicode UTF-8 for worldwide language support" - Ok and reboot the computer.
.. _get-started-windows-tools-installer:
2017-03-26 18:01:52 -04:00
ESP-IDF Tools Installer
=======================
2017-03-26 18:01:52 -04:00
The easiest way to install ESP-IDF's prerequisites is to download one of ESP-IDF Tools Installers from this URL:
2017-03-26 18:01:52 -04:00
- Online Installer (30 MB): https://dl.espressif.com/dl/esp-idf-tools-setup-online-2.5.exe
- Offline Installer - includes ESP-IDF v4.2, v4.1.1 (810 MB): https://dl.espressif.com/dl/esp-idf-tools-setup-offline-2.5.exe
2017-03-26 18:01:52 -04:00
.. IMPORTANT: Next time this link is updated, please go to get-started/index.rst and rewrite the section under "Alternative File Downloads ... Windows". Then delete this comment.
What is the usecase for Online and Offline Installer
----------------------------------------------------
2017-03-26 18:01:52 -04:00
Online Installer is very small and allows the installation of all available releases of ESP-IDF. The installer will download only necessary dependencies including `Git For Windows`_ during the installation process. The installer stores downloaded files in the cache directory ``%userprofile%\.espressif``
Offline Installer does not require any network connection. The installer contains all required dependencies including `Git For Windows`_ . The installer allows the installation of ESP-IDF with the following tags: v4.2, v4.1.1.
Components of the installation
------------------------------
The installer deploys the following components:
- Embedded Python
- Cross-compilers
- OpenOCD
- CMake_ and Ninja_ build tools
- ESP-IDF
The installer also allows reusing the existing directory with ESP-IDF. The recommended directory is ``%userprofile%\Desktop\esp-idf`` where ``%userprofile%`` is your home directory.
Launching ESP-IDF Environment
-----------------------------
At the end of the installation process you can check out option ``Run ESP-IDF PowerShell Environment`` or ``Run ESP-IDF Command Prompt (cmd.exe)``. The installer will launch ESP-IDF environment in selected prompt.
``Run ESP-IDF PowerShell Environment``:
.. figure:: ../../_static/esp-idf-installer-screenshot-powershell.png
:align: center
:alt: Completing the ESP-IDF Tools Setup Wizard with Run ESP-IDF PowerShell Environment
:figclass: align-center
Completing the ESP-IDF Tools Setup Wizard with Run ESP-IDF PowerShell Environment
.. figure:: ../../_static/esp-idf-installer-powershell.png
:align: center
:alt: ESP-IDF PowerShell
:figclass: align-center
ESP-IDF PowerShell
``Run ESP-IDF Command Prompt (cmd.exe)``:
.. figure:: ../../_static/esp-idf-installer-screenshot.png
:align: center
:alt: Completing the ESP-IDF Tools Setup Wizard with Run ESP-IDF Command Prompt (cmd.exe)
:figclass: align-center
Completing the ESP-IDF Tools Setup Wizard with Run ESP-IDF Command Prompt (cmd.exe)
.. figure:: ../../_static/esp-idf-installer-command-prompt.png
:align: center
:alt: ESP-IDF Command Prompt
:figclass: align-center
ESP-IDF Command Prompt
Using the Command Prompt
========================
For the remaining Getting Started steps, we're going to use the Windows Command Prompt.
2017-03-26 18:01:52 -04:00
ESP-IDF Tools Installer also creates a shortcut in the Start menu to launch the ESP-IDF Command Prompt. This shortcut launches the Command Prompt (cmd.exe) and runs ``export.bat`` script to set up the environment variables (``PATH``, ``IDF_PATH`` and others). Inside this command prompt, all the installed tools are available.
2017-03-26 18:01:52 -04:00
Note that this shortcut is specific to the ESP-IDF directory selected in the ESP-IDF Tools Installer. If you have multiple ESP-IDF directories on the computer (for example, to work with different versions of ESP-IDF), you have two options to use them:
2017-03-26 18:01:52 -04:00
1. Create a copy of the shortcut created by the ESP-IDF Tools Installer, and change the working directory of the new shortcut to the ESP-IDF directory you wish to use.
2017-03-26 18:01:52 -04:00
2. Alternatively, run ``cmd.exe``, then change to the ESP-IDF directory you wish to use, and run ``export.bat``. Note that unlike the previous option, this way requires Python and Git to be present in ``PATH``. If you get errors related to Python or Git not being found, use the first option.
2017-03-26 18:01:52 -04:00
Next Steps
==========
If the ESP-IDF Tools Installer has finished successfully, then the development environment setup is complete. Proceed directly to :ref:`get-started-start-project`.
2017-03-26 18:01:52 -04:00
Related Documents
=================
For advanced users who want to customize the install process:
2017-03-26 18:01:52 -04:00
.. toctree::
:maxdepth: 1
windows-setup-update
2017-03-26 18:01:52 -04:00
.. _MSYS2: https://www.msys2.org/
.. _CMake: https://cmake.org/download/
.. _Ninja: https://ninja-build.org/
.. _Python: https://www.python.org/downloads/windows/
.. _Git for Windows: https://gitforwindows.org/
.. _Github Desktop: https://desktop.github.com/