mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
71 lines
2.7 KiB
Markdown
71 lines
2.7 KiB
Markdown
|
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||
|
|
|
||
|
|
# Wi-Fi SoftAP & Station Example
|
||
|
|
|
||
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
||
|
|
|
||
|
|
This example demonstrates how to use the ESP Wi-Fi driver to act as both an Access Point and a Station simultaneously using the SoftAP and Station features.
|
||
|
|
With NAPT enabled on the softAP interface and the station interface set as the defaut interface this example can be used as Wifi nat router.
|
||
|
|
|
||
|
|
## How to use example
|
||
|
|
### Configure the project
|
||
|
|
|
||
|
|
Open the project configuration menu (`idf.py menuconfig`).
|
||
|
|
|
||
|
|
In the `Example Configuration` menu:
|
||
|
|
|
||
|
|
* Set the Wi-Fi SoftAP configuration.
|
||
|
|
* Set `WiFi AP SSID`.
|
||
|
|
* Set `WiFi AP Password`.
|
||
|
|
|
||
|
|
* Set the Wi-Fi STA configuration.
|
||
|
|
* Set `WiFi Remote AP SSID`.
|
||
|
|
* Set `WiFi Remote AP Password`.
|
||
|
|
|
||
|
|
Optional: If necessary, modify the other choices to suit your needs.
|
||
|
|
|
||
|
|
### Build and Flash
|
||
|
|
|
||
|
|
Build the project and flash it to the board, then run the monitor tool to view the serial output:
|
||
|
|
|
||
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
||
|
|
|
||
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
||
|
|
|
||
|
|
## Example Output
|
||
|
|
|
||
|
|
There is the console output for this example:
|
||
|
|
|
||
|
|
```
|
||
|
|
I (680) WiFi SoftAP: ESP_WIFI_MODE_AP
|
||
|
|
I (690) WiFi SoftAP: wifi_init_softap finished. SSID:myssid password:mypassword channel:1
|
||
|
|
I (690) WiFi Sta: ESP_WIFI_MODE_STA
|
||
|
|
I (690) WiFi Sta: wifi_init_sta finished.
|
||
|
|
I (700) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
|
||
|
|
I (800) wifi:mode : sta (58:bf:25:e0:41:00) + softAP (58:bf:25:e0:41:01)
|
||
|
|
I (800) wifi:enable tsf
|
||
|
|
I (810) wifi:Total power save buffer number: 16
|
||
|
|
I (810) wifi:Init max length of beacon: 752/752
|
||
|
|
I (810) wifi:Init max length of beacon: 752/752
|
||
|
|
I (820) WiFi Sta: Station started
|
||
|
|
I (820) wifi:new:<1,1>, old:<1,1>, ap:<1,1>, sta:<1,1>, prof:1
|
||
|
|
I (820) wifi:state: init -> auth (b0)
|
||
|
|
I (830) wifi:state: auth -> assoc (0)
|
||
|
|
E (840) wifi:Association refused temporarily, comeback time 1536 mSec
|
||
|
|
I (2380) wifi:state: assoc -> assoc (0)
|
||
|
|
I (2390) wifi:state: assoc -> run (10)
|
||
|
|
I (2400) wifi:connected with myssid_c3, aid = 1, channel 1, 40U, bssid = 84:f7:03:60:86:1d
|
||
|
|
I (2400) wifi:security: WPA2-PSK, phy: bgn, rssi: -14
|
||
|
|
I (2410) wifi:pm start, type: 1
|
||
|
|
|
||
|
|
I (2410) wifi:AP's beacon interval = 102400 us, DTIM period = 2
|
||
|
|
I (3920) WiFi Sta: Got IP:192.168.5.2
|
||
|
|
I (3920) esp_netif_handlers: sta ip: 192.168.5.2, mask: 255.255.255.0, gw: 192.168.5.1
|
||
|
|
I (3920) WiFi Sta: connected to ap SSID:myssid_c3 password:mypassword_c3
|
||
|
|
```
|
||
|
|
|
||
|
|
## Troubleshooting
|
||
|
|
|
||
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|