esp-idf/components/bt/host/bluedroid/bta/dm/bta_dm_api.c

/******************************************************************************
 *
 *  Copyright (C) 2003-2014 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This is the API implementation file for the BTA device manager.
 *
 ******************************************************************************/

#include "bta/bta_sys.h"
#include "bta/bta_api.h"
#include "bta_dm_int.h"
#include "bta_sys_int.h"
#include "stack/btm_api.h"
#include "btm_int.h"
#include <string.h>
#include "bta/utl.h"
#include "osi/allocator.h"

/*****************************************************************************
**  Constants
*****************************************************************************/

static const tBTA_SYS_REG bta_dm_reg = {
    bta_dm_sm_execute,
    bta_dm_sm_disable
};

static const tBTA_SYS_REG bta_dm_search_reg = {
    bta_dm_search_sm_execute,
    bta_dm_search_sm_disable
};

/*******************************************************************************
**
** Function         BTA_EnableBluetooth
**
** Description      Enables bluetooth service.  This function must be
**                  called before any other functions in the BTA API are called.
**
**
** Returns          tBTA_STATUS
**
*******************************************************************************/
tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback)
{

    tBTA_DM_API_ENABLE    *p_msg;

    /* Bluetooth disabling is in progress */
    if (bta_dm_cb.disabling) {
        return BTA_FAILURE;
    }

    memset(&bta_dm_cb, 0, sizeof(bta_dm_cb));

    bta_sys_register (BTA_ID_DM, &bta_dm_reg );
    bta_sys_register (BTA_ID_DM_SEARCH, &bta_dm_search_reg );

    /* if UUID list is not provided as static data */
    bta_sys_eir_register(bta_dm_eir_update_uuid);

    if ((p_msg = (tBTA_DM_API_ENABLE *) osi_malloc(sizeof(tBTA_DM_API_ENABLE))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_ENABLE_EVT;
        p_msg->p_sec_cback = p_cback;
        bta_sys_sendmsg(p_msg);
        return BTA_SUCCESS;
    }
    return BTA_FAILURE;

}

/*******************************************************************************
**
** Function         BTA_DisableBluetooth
**
** Description      Disables bluetooth service.  This function is called when
**                  the application no longer needs bluetooth service
**
** Returns          void
**
*******************************************************************************/
tBTA_STATUS BTA_DisableBluetooth(void)
{

    BT_HDR    *p_msg;

    if ((p_msg = (BT_HDR *) osi_malloc(sizeof(BT_HDR))) != NULL) {
        p_msg->event = BTA_DM_API_DISABLE_EVT;
        bta_sys_sendmsg(p_msg);
    } else {
        return BTA_FAILURE;
    }

    return BTA_SUCCESS;
}

/*******************************************************************************
**
** Function         BTA_EnableTestMode
**
** Description      Enables bluetooth device under test mode
**
**
** Returns          tBTA_STATUS
**
*******************************************************************************/
tBTA_STATUS BTA_EnableTestMode(void)
{
    BT_HDR    *p_msg;

    APPL_TRACE_API("BTA_EnableTestMode");

    if ((p_msg = (BT_HDR *) osi_malloc(sizeof(BT_HDR))) != NULL) {
        p_msg->event = BTA_DM_API_ENABLE_TEST_MODE_EVT;
        bta_sys_sendmsg(p_msg);
        return BTA_SUCCESS;
    }
    return BTA_FAILURE;
}

/*******************************************************************************
**
** Function         BTA_DisableTestMode
**
** Description      Disable bluetooth device under test mode
**
**
** Returns          None
**
*******************************************************************************/
void BTA_DisableTestMode(void)
{
    BT_HDR    *p_msg;

    APPL_TRACE_API("BTA_DisableTestMode");

    if ((p_msg = (BT_HDR *) osi_malloc(sizeof(BT_HDR))) != NULL) {
        p_msg->event = BTA_DM_API_DISABLE_TEST_MODE_EVT;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmSetDeviceName
**
** Description      This function sets the Bluetooth name of local device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetDeviceName(const char *p_name)
{

    tBTA_DM_API_SET_NAME    *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_NAME *) osi_malloc(sizeof(tBTA_DM_API_SET_NAME))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_SET_NAME_EVT;
        /* truncate the name if needed */
        BCM_STRNCPY_S((char *)p_msg->name, sizeof(p_msg->name), p_name, BD_NAME_LEN - 1);
        p_msg->name[BD_NAME_LEN - 1] = 0;

        bta_sys_sendmsg(p_msg);
    }


}

void BTA_DmConfigEir(tBTA_DM_EIR_CONF *eir_config)
{
    tBTA_DM_API_CONFIG_EIR    *p_msg;

    UINT8 eir_manufac_spec_len = eir_config->bta_dm_eir_manufac_spec_len;
    UINT8 eir_url_len = eir_config->bta_dm_eir_url_len;

    if (eir_manufac_spec_len > HCI_EXT_INQ_RESPONSE_LEN) {
        APPL_TRACE_WARNING ("%s: Manufacturer data is too long(%d), cut it to %d\n",
                            __func__, eir_manufac_spec_len, HCI_EXT_INQ_RESPONSE_LEN);
        eir_manufac_spec_len = HCI_EXT_INQ_RESPONSE_LEN;
    }
    if (eir_url_len > HCI_EXT_INQ_RESPONSE_LEN) {
        APPL_TRACE_WARNING ("%s: URL is too long(%d), cut it to %d\n",
                            __func__, eir_url_len, HCI_EXT_INQ_RESPONSE_LEN);
        eir_url_len = HCI_EXT_INQ_RESPONSE_LEN;
    }

    if ((p_msg = (tBTA_DM_API_CONFIG_EIR *) osi_malloc(sizeof(tBTA_DM_API_CONFIG_EIR) + eir_manufac_spec_len + eir_url_len)) != NULL) {
        p_msg->hdr.event = BTA_DM_API_CONFIG_EIR_EVT;

        p_msg->eir_fec_required = eir_config->bta_dm_eir_fec_required;
        p_msg->eir_included_tx_power = eir_config->bta_dm_eir_included_tx_power;
        p_msg->eir_included_uuid = eir_config->bta_dm_eir_included_uuid;
        p_msg->eir_flags = eir_config->bta_dm_eir_flags;
        p_msg->eir_manufac_spec_len = eir_manufac_spec_len;
        p_msg->eir_manufac_spec = p_msg->data;
        p_msg->eir_url_len = eir_url_len;
        p_msg->eir_url = p_msg->data + eir_manufac_spec_len;

        if (eir_manufac_spec_len > 0) {
            memcpy(p_msg->eir_manufac_spec, eir_config->bta_dm_eir_manufac_spec, eir_manufac_spec_len);
        }

        if (eir_url_len > 0) {
            memcpy(p_msg->eir_url, eir_config->bta_dm_eir_url, eir_url_len);
        }

        bta_sys_sendmsg(p_msg);
    }
}

#if (BLE_INCLUDED == TRUE)
void BTA_DmUpdateWhiteList(BOOLEAN add_remove,  BD_ADDR remote_addr, tBLE_ADDR_TYPE addr_type, tBTA_ADD_WHITELIST_CBACK *add_wl_cb)
{
    tBTA_DM_API_UPDATE_WHITE_LIST *p_msg;
    if ((p_msg = (tBTA_DM_API_UPDATE_WHITE_LIST *)osi_malloc(sizeof(tBTA_DM_API_UPDATE_WHITE_LIST))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_UPDATE_WHITE_LIST_EVT;
        p_msg->add_remove = add_remove;
        p_msg->addr_type = addr_type;
        p_msg->add_wl_cb = add_wl_cb;
        memcpy(p_msg->remote_addr, remote_addr, sizeof(BD_ADDR));

        bta_sys_sendmsg(p_msg);
    }
}

void BTA_DmBleReadAdvTxPower(tBTA_CMPL_CB *cmpl_cb)
{
    tBTA_DM_API_READ_ADV_TX_POWER *p_msg;
    if ((p_msg = (tBTA_DM_API_READ_ADV_TX_POWER *)osi_malloc(sizeof(tBTA_DM_API_READ_ADV_TX_POWER))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_READ_ADV_TX_POWER_EVT;
        p_msg->read_tx_power_cb = cmpl_cb;
        bta_sys_sendmsg(p_msg);
    }
}
#endif  ///BLE_INCLUDED == TRUE

void BTA_DmBleReadRSSI(BD_ADDR remote_addr, tBTA_TRANSPORT transport, tBTA_CMPL_CB *cmpl_cb)
{
    tBTA_DM_API_READ_RSSI *p_msg;
    if ((p_msg = (tBTA_DM_API_READ_RSSI *)osi_malloc(sizeof(tBTA_DM_API_READ_RSSI))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_READ_RSSI_EVT;
        memcpy(p_msg->remote_addr, remote_addr, sizeof(BD_ADDR));
        p_msg->transport = transport;
        p_msg->read_rssi_cb = cmpl_cb;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmSetVisibility
**
** Description      This function sets the Bluetooth connectable,
**                  discoverable, pairable and conn paired only modes of local device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter )
{

    tBTA_DM_API_SET_VISIBILITY    *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_VISIBILITY *) osi_malloc(sizeof(tBTA_DM_API_SET_VISIBILITY))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_SET_VISIBILITY_EVT;
        p_msg->disc_mode = disc_mode;
        p_msg->conn_mode = conn_mode;
        p_msg->pair_mode = pairable_mode;
        p_msg->conn_paired_only = conn_filter;


        bta_sys_sendmsg(p_msg);
    }


}

/*******************************************************************************
**
** Function         BTA_DmSearch
**
** Description      This function searches for peer Bluetooth devices. It performs
**                  an inquiry and gets the remote name for devices. Service
**                  discovery is done if services is non zero
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, tBTA_DM_SEARCH_CBACK *p_cback)
{

    tBTA_DM_API_SEARCH    *p_msg;

    if ((p_msg = (tBTA_DM_API_SEARCH *) osi_malloc(sizeof(tBTA_DM_API_SEARCH))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_SEARCH));

        p_msg->hdr.event = BTA_DM_API_SEARCH_EVT;
        memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ));
        p_msg->services = services;
        p_msg->p_cback = p_cback;
        p_msg->rs_res  = BTA_DM_RS_NONE;
        bta_sys_sendmsg(p_msg);
    }

}


/*******************************************************************************
**
** Function         BTA_DmSearchCancel
**
** Description      This function  cancels a search initiated by BTA_DmSearch
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSearchCancel(void)
{
    BT_HDR    *p_msg;

    if ((p_msg = (BT_HDR *) osi_malloc(sizeof(BT_HDR))) != NULL) {
        p_msg->event = BTA_DM_API_SEARCH_CANCEL_EVT;
        bta_sys_sendmsg(p_msg);
    }

}

/*******************************************************************************
**
** Function         BTA_DmDiscover
**
** Description      This function does service discovery for services of a
**                  peer device
**
**
** Returns          void
**
*******************************************************************************/
#if (SDP_INCLUDED == TRUE)
void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services,
                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
{
    tBTA_DM_API_DISCOVER    *p_msg;

    if ((p_msg = (tBTA_DM_API_DISCOVER *) osi_malloc(sizeof(tBTA_DM_API_DISCOVER))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_DISCOVER));

        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->services = services;
        p_msg->p_cback = p_cback;
        p_msg->sdp_search = sdp_search;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmDiscoverUUID
**
** Description      This function does service discovery for services of a
**                  peer device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid,
                        tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
{
    tBTA_DM_API_DISCOVER    *p_msg;

    if ((p_msg = (tBTA_DM_API_DISCOVER *) osi_malloc(sizeof(tBTA_DM_API_DISCOVER))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->services = BTA_USER_SERVICE_MASK; //Not exposed at API level
        p_msg->p_cback = p_cback;
        p_msg->sdp_search = sdp_search;

#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
        p_msg->num_uuid = 0;
        p_msg->p_uuid = NULL;
#endif
        memcpy( &p_msg->uuid, uuid, sizeof(tSDP_UUID) );
        bta_sys_sendmsg(p_msg);
    }
}
#endif  ///SDP_INCLUDED == TRUE

/*******************************************************************************
**
** Function         BTA_DmBond
**
** Description      This function initiates a bonding procedure with a peer
**                  device
**
**
** Returns          void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
void BTA_DmBond(BD_ADDR bd_addr)
{
    tBTA_DM_API_BOND    *p_msg;

    p_msg = (tBTA_DM_API_BOND *) osi_malloc(sizeof(tBTA_DM_API_BOND));
    if (p_msg != NULL) {
        p_msg->hdr.event = BTA_DM_API_BOND_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->transport = BTA_TRANSPORT_UNKNOWN;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBondByTransports
**
** Description      This function initiates a bonding procedure with a peer
**                  device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport)
{
    tBTA_DM_API_BOND    *p_msg;

    if ((p_msg = (tBTA_DM_API_BOND *) osi_malloc(sizeof(tBTA_DM_API_BOND))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BOND_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->transport = transport;
        bta_sys_sendmsg(p_msg);
    }


}

/*******************************************************************************
**
** Function         BTA_DmBondCancel
**
** Description      This function cancels the bonding procedure with a peer
**                  device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBondCancel(BD_ADDR bd_addr)
{
    tBTA_DM_API_BOND_CANCEL    *p_msg;

    if ((p_msg = (tBTA_DM_API_BOND_CANCEL *) osi_malloc(sizeof(tBTA_DM_API_BOND_CANCEL))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BOND_CANCEL_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        bta_sys_sendmsg(p_msg);
    }
}
#endif  ///SMP_INCLUDED == TRUE

#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function         BTA_DMSetPinType
**
** Description      This function set pin type as BTM_PIN_TYPE_FIXED or BTM_PIN_TYPE_VARIABLE
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DMSetPinType (UINT8 pin_type, UINT8 *pin_code, UINT8 pin_code_len)
{
    tBTA_DM_API_SET_PIN_TYPE    *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_PIN_TYPE *) osi_malloc(sizeof(tBTA_DM_API_SET_PIN_TYPE))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_SET_PIN_TYPE_EVT;
        p_msg->pin_type = pin_type;
        p_msg->pin_len = pin_code_len;
        memcpy(p_msg->p_pin, pin_code, pin_code_len);
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmPinReply
**
** Description      This function provides a pincode for a remote device when
**                  one is requested by DM through BTA_DM_PIN_REQ_EVT
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len, UINT8 *p_pin)
{
    tBTA_DM_API_PIN_REPLY    *p_msg;

    if ((p_msg = (tBTA_DM_API_PIN_REPLY *) osi_malloc(sizeof(tBTA_DM_API_PIN_REPLY))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_PIN_REPLY_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->accept = accept;
        if (accept) {
            p_msg->pin_len = pin_len;
            memcpy(p_msg->p_pin, p_pin, pin_len);
        }
        bta_sys_sendmsg(p_msg);
    }

}
#endif  ///CLASSIC_BT_INCLUDED == TRUE

#if (BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
/*******************************************************************************
**
** Function         BTA_DmLocalOob
**
** Description      This function retrieves the OOB data from local controller.
**                  The result is reported by:
**                  - bta_dm_co_loc_oob_ext() if device supports secure
**                    connections (SC)
**                  - bta_dm_co_loc_oob() if device doesn't support SC
**
** Returns          void
**
*******************************************************************************/
void BTA_DmLocalOob(void)
{
    tBTA_DM_API_LOC_OOB    *p_msg;

    if ((p_msg = (tBTA_DM_API_LOC_OOB *) osi_malloc(sizeof(tBTA_DM_API_LOC_OOB))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_LOC_OOB_EVT;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmOobReply
**
**                  This function is called to provide the OOB data for
**                  SMP in response to BTM_LE_OOB_REQ_EVT
**
** Parameters:      bd_addr     - Address of the peer device
**                  len         - length of simple pairing Randomizer  C
**                  p_value     - simple pairing Randomizer  C.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmOobReply(BD_ADDR bd_addr, UINT8 len, UINT8 *p_value)
{
    tBTA_DM_API_OOB_REPLY    *p_msg;

    if ((p_msg = (tBTA_DM_API_OOB_REPLY *) osi_malloc(sizeof(tBTA_DM_API_OOB_REPLY))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_OOB_REPLY_EVT;
        if(p_value == NULL || len > BT_OCTET16_LEN) {
            return;
        }
        memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN);
        p_msg->len = len;
        memcpy(p_msg->value, p_value, len);
        bta_sys_sendmsg(p_msg);
    }
}
#endif /* BTM_OOB_INCLUDED */
/*******************************************************************************
**
** Function         BTA_DmConfirm
**
** Description      This function accepts or rejects the numerical value of the
**                  Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
**
** Returns          void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept)
{
    tBTA_DM_API_CONFIRM    *p_msg;

    if ((p_msg = (tBTA_DM_API_CONFIRM *) osi_malloc(sizeof(tBTA_DM_API_CONFIRM))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_CONFIRM_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->accept = accept;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmPasskeyReqReply
**
** Description      This function is called to provide the passkey for
**                  Simple Pairing in response to BTA_DM_SP_KEY_REQ_EVT
**
** Returns          void
**
*******************************************************************************/
#if (BT_SSP_INCLUDED == TRUE)
void BTA_DmPasskeyReqReply(BOOLEAN accept, BD_ADDR bd_addr, UINT32 passkey)
{
    tBTA_DM_API_KEY_REQ    *p_msg;
    if ((p_msg = (tBTA_DM_API_KEY_REQ *) osi_malloc(sizeof(tBTA_DM_API_KEY_REQ))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_KEY_REQ_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->accept = accept;
        p_msg->passkey = passkey;
        bta_sys_sendmsg(p_msg);
    }
}
#endif ///BT_SSP_INCLUDED == TRUE
#endif  ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function         BTA_DmAddDevice
**
** Description      This function adds a device to the security database list of
**                  peer device
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, LINK_KEY link_key,
                     tBTA_SERVICE_MASK trusted_mask, BOOLEAN is_trusted,
                     UINT8 key_type, tBTA_IO_CAP io_cap, UINT8 pin_length)
{

    tBTA_DM_API_ADD_DEVICE *p_msg;

    if ((p_msg = (tBTA_DM_API_ADD_DEVICE *) osi_malloc(sizeof(tBTA_DM_API_ADD_DEVICE))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_DEVICE));

        p_msg->hdr.event = BTA_DM_API_ADD_DEVICE_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->tm = trusted_mask;
        p_msg->is_trusted = is_trusted;
        p_msg->io_cap = io_cap;

        if (link_key) {
            p_msg->link_key_known = TRUE;
            p_msg->key_type = key_type;
            memcpy(p_msg->link_key, link_key, LINK_KEY_LEN);
        }

        /* Load device class if specified */
        if (dev_class) {
            p_msg->dc_known = TRUE;
            memcpy (p_msg->dc, dev_class, DEV_CLASS_LEN);
        }

        memset (p_msg->bd_name, 0, BD_NAME_LEN + 1);
        memset (p_msg->features, 0, sizeof (p_msg->features));
        p_msg->pin_length = pin_length;

        bta_sys_sendmsg(p_msg);
    }
}


/*******************************************************************************
**
** Function         BTA_DmRemoveDevice
**
** Description      This function removes a device fromthe security database list of
**                  peer device. It manages unpairing even while connected.
**
**
** Returns          void
**
*******************************************************************************/
tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr, tBT_TRANSPORT transport)
{
    tBTA_DM_API_REMOVE_DEVICE *p_msg;

    if ((p_msg = (tBTA_DM_API_REMOVE_DEVICE *) osi_malloc(sizeof(tBTA_DM_API_REMOVE_DEVICE))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_REMOVE_DEVICE));

        p_msg->hdr.event = BTA_DM_API_REMOVE_DEVICE_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->transport = transport;
        bta_sys_sendmsg(p_msg);
    } else {
        return BTA_FAILURE;
    }

    return BTA_SUCCESS;
}
// #endif  ///SMP_INCLUDED == TRUE

/*******************************************************************************
**
** Function         BTA_GetEirService
**
** Description      This function is called to get BTA service mask from EIR.
**
** Parameters       p_eir - pointer of EIR significant part
**                  p_services - return the BTA service mask
**
** Returns          None
**
*******************************************************************************/
extern const UINT16 bta_service_id_to_uuid_lkup_tbl [];
void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services )
{
    UINT8 xx, yy;
    UINT8 num_uuid, max_num_uuid = 32;
    UINT8 uuid_list[32 * LEN_UUID_16];
    UINT16 *p_uuid16 = (UINT16 *)uuid_list;
    tBTA_SERVICE_MASK mask;

    BTM_GetEirUuidList( p_eir, LEN_UUID_16, &num_uuid, uuid_list, max_num_uuid);
    for ( xx = 0; xx < num_uuid; xx++ ) {
        mask = 1;
        for ( yy = 0; yy < BTA_MAX_SERVICE_ID; yy++ ) {
            if ( *(p_uuid16 + xx) == bta_service_id_to_uuid_lkup_tbl[yy] ) {
                *p_services |= mask;
                break;
            }
            mask <<= 1;
        }

        /* for HSP v1.2 only device */
        if (*(p_uuid16 + xx) == UUID_SERVCLASS_HEADSET_HS) {
            *p_services |= BTA_HSP_SERVICE_MASK;
        }

        if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SOURCE) {
            *p_services |= BTA_HL_SERVICE_MASK;
        }

        if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SINK) {
            *p_services |= BTA_HL_SERVICE_MASK;
        }
    }
}

/*******************************************************************************
**
** Function         BTA_DmGetConnectionState
**
** Description      Returns whether the remote device is currently connected.
**
** Returns          0 if the device is NOT connected.
**
*******************************************************************************/
UINT16 BTA_DmGetConnectionState( BD_ADDR bd_addr )
{
    tBTA_DM_PEER_DEVICE *p_dev = bta_dm_find_peer_device(bd_addr);
    return (p_dev && p_dev->conn_state == BTA_DM_CONNECTED);
}

#if (SDP_INCLUDED == TRUE)
/*******************************************************************************
**                   Device Identification (DI) Server Functions
*******************************************************************************/
/*******************************************************************************
**
** Function         BTA_DmSetLocalDiRecord
**
** Description      This function adds a DI record to the local SDP database.
**
** Returns          BTA_SUCCESS if record set sucessfully, otherwise error code.
**
*******************************************************************************/
tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info,
                                    UINT32 *p_handle )
{
    tBTA_STATUS  status = BTA_FAILURE;

    if (bta_dm_di_cb.di_num < BTA_DI_NUM_MAX) {
        if (SDP_SetLocalDiRecord((tSDP_DI_RECORD *)p_device_info, p_handle) == SDP_SUCCESS) {
            if (!p_device_info->primary_record) {
                bta_dm_di_cb.di_handle[bta_dm_di_cb.di_num] = *p_handle;
                bta_dm_di_cb.di_num ++;
            }

            bta_sys_add_uuid(UUID_SERVCLASS_PNP_INFORMATION);
            status =  BTA_SUCCESS;
        }
    }

    return status;
}
#endif  ///SDP_INCLUDED == TRUE
/*******************************************************************************
**
** Function         bta_dmexecutecallback
**
** Description      This function will request BTA to execute a call back in the context of BTU task
**                  This API was named in lower case because it is only intended
**                  for the internal customers(like BTIF).
**
** Returns          void
**
*******************************************************************************/
void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK *p_callback, void *p_param)
{
    tBTA_DM_API_EXECUTE_CBACK *p_msg;

    if ((p_msg = (tBTA_DM_API_EXECUTE_CBACK *) osi_malloc(sizeof(tBTA_DM_API_EXECUTE_CBACK))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_EXECUTE_CBACK_EVT;
        p_msg->p_param = p_param;
        p_msg->p_exec_cback = p_callback;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmAddBleKey
**
** Description      Add/modify LE device information.  This function will be
**                  normally called during host startup to restore all required
**                  information stored in the NVRAM.
**
** Parameters:      bd_addr          - BD address of the peer
**                  p_le_key         - LE key values.
**                  key_type         - LE SMP key type.
**
** Returns          BTA_SUCCESS if successful
**                  BTA_FAIL if operation failed.
**
*******************************************************************************/
#if BLE_INCLUDED == TRUE
#if SMP_INCLUDED == TRUE
void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, tBTA_LE_KEY_TYPE key_type)
{
    tBTA_DM_API_ADD_BLEKEY *p_msg;

    if ((p_msg = (tBTA_DM_API_ADD_BLEKEY *) osi_malloc(sizeof(tBTA_DM_API_ADD_BLEKEY))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_BLEKEY));

        p_msg->hdr.event = BTA_DM_API_ADD_BLEKEY_EVT;
        p_msg->key_type = key_type;
        bdcpy(p_msg->bd_addr, bd_addr);
        memcpy(&p_msg->blekey, p_le_key, sizeof(tBTA_LE_KEY_VALUE));

        bta_sys_sendmsg(p_msg);
    }

}

/*******************************************************************************
**
** Function         BTA_DmAddBleDevice
**
** Description      Add a BLE device.  This function will be normally called
**                  during host startup to restore all required information
**                  for a LE device stored in the NVRAM.
**
** Parameters:      bd_addr          - BD address of the peer
**                  dev_type         - Remote device's device type.
**                  auth_mode        - auth mode
**                  addr_type        - LE device address type.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, int auth_mode, tBT_DEVICE_TYPE dev_type)
{
    tBTA_DM_API_ADD_BLE_DEVICE *p_msg;

    if ((p_msg = (tBTA_DM_API_ADD_BLE_DEVICE *) osi_malloc(sizeof(tBTA_DM_API_ADD_BLE_DEVICE))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_BLE_DEVICE));

        p_msg->hdr.event = BTA_DM_API_ADD_BLEDEVICE_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->addr_type = addr_type;
        p_msg->auth_mode = auth_mode;
        p_msg->dev_type = dev_type;

        bta_sys_sendmsg(p_msg);
    }
}
/*******************************************************************************
**
** Function         BTA_DmBlePasskeyReply
**
** Description      Send BLE SMP passkey reply.
**
** Parameters:      bd_addr          - BD address of the peer
**                  accept           - passkey entry sucessful or declined.
**                  passkey          - passkey value, must be a 6 digit number,
**                                     can be lead by 0.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey)
{
    tBTA_DM_API_PASSKEY_REPLY    *p_msg;

    if ((p_msg = (tBTA_DM_API_PASSKEY_REPLY *) osi_malloc(sizeof(tBTA_DM_API_PASSKEY_REPLY))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_PASSKEY_REPLY));

        p_msg->hdr.event = BTA_DM_API_BLE_PASSKEY_REPLY_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->accept = accept;

        if (accept) {
            p_msg->passkey = passkey;
        }
        bta_sys_sendmsg(p_msg);
    }
}

void BTA_DmBleSetStaticPasskey(bool add, uint32_t passkey)
{
    tBTA_DM_API_SET_DEFAULT_PASSKEY    *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_DEFAULT_PASSKEY *) osi_malloc(sizeof(tBTA_DM_API_SET_DEFAULT_PASSKEY))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_SET_DEFAULT_PASSKEY));

        p_msg->hdr.event = BTA_DM_API_BLE_SET_STATIC_PASSKEY_EVT;
        p_msg->add = add;
        p_msg->static_passkey = passkey;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleConfirmReply
**
** Description      Send BLE SMP SC user confirmation reply.
**
** Parameters:      bd_addr          - BD address of the peer
**                  accept           - numbers to compare are the same or different.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleConfirmReply(BD_ADDR bd_addr, BOOLEAN accept)
{
    tBTA_DM_API_CONFIRM *p_msg = (tBTA_DM_API_CONFIRM *)osi_malloc(sizeof(tBTA_DM_API_CONFIRM));
    if (p_msg != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_CONFIRM));
        p_msg->hdr.event = BTA_DM_API_BLE_CONFIRM_REPLY_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->accept = accept;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSecurityGrant
**
** Description      Grant security request access.
**
** Parameters:      bd_addr          - BD address of the peer
**                  res              - security grant status.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res)
{
    tBTA_DM_API_BLE_SEC_GRANT    *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_SEC_GRANT *) osi_malloc(sizeof(tBTA_DM_API_BLE_SEC_GRANT))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SEC_GRANT));

        p_msg->hdr.event = BTA_DM_API_BLE_SEC_GRANT_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->res = res;

        bta_sys_sendmsg(p_msg);
    }
}
#endif  ///SMP_INCLUDED == TRUE


/*******************************************************************************
**
** Function         BTA_DmSetBlePrefConnParams
**
** Description      This function is called to set the preferred connection
**                  parameters when default connection parameter is not desired.
**
** Parameters:      bd_addr          - BD address of the peripheral
**                  scan_interval    - scan interval
**                  scan_window      - scan window
**                  min_conn_int     - minimum preferred connection interval
**                  max_conn_int     - maximum preferred connection interval
**                  slave_latency    - preferred slave latency
**                  supervision_tout - preferred supervision timeout
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr,
                                UINT16 min_conn_int, UINT16 max_conn_int,
                                UINT16 slave_latency, UINT16 supervision_tout )
{
#if BLE_INCLUDED == TRUE
    tBTA_DM_API_BLE_CONN_PARAMS    *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_CONN_PARAMS *) osi_malloc(sizeof(tBTA_DM_API_BLE_CONN_PARAMS))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_CONN_PARAMS));

        p_msg->hdr.event = BTA_DM_API_BLE_CONN_PARAM_EVT;

        memcpy(p_msg->peer_bda, bd_addr, BD_ADDR_LEN);

        p_msg->conn_int_max     = max_conn_int;
        p_msg->conn_int_min     = min_conn_int;
        p_msg->slave_latency    = slave_latency;
        p_msg->supervision_tout = supervision_tout;

        bta_sys_sendmsg(p_msg);
    }
#endif
}

/*******************************************************************************
**
** Function         BTA_DmSetBleConnScanParams
**
** Description      This function is called to set scan parameters used in
**                  BLE connection request
**
** Parameters:      scan_interval    - scan interval
**                  scan_window      - scan window
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetBleConnScanParams(UINT32 scan_interval, UINT32 scan_window)
{
    tBTA_DM_API_BLE_SCAN_PARAMS  *p_msg;
    if ((p_msg = (tBTA_DM_API_BLE_SCAN_PARAMS *)osi_malloc(sizeof(tBTA_DM_API_BLE_SCAN_PARAMS))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SCAN_PARAMS));
        p_msg->hdr.event = BTA_DM_API_BLE_CONN_SCAN_PARAM_EVT;
        p_msg->scan_int         = scan_interval;
        p_msg->scan_window      = scan_window;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmSetBleScanParams
**
** Description      This function is called to set scan parameters
**
** Parameters:      client_if - Client IF
**                  scan_interval - scan interval
**                  scan_window - scan window
**                  scan_mode - scan mode
**                  scan_param_setup_status_cback - Set scan param status callback
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetBleScanParams(tGATT_IF client_if, UINT32 scan_interval,
                            UINT32 scan_window, tBLE_SCAN_MODE scan_mode,
                            tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback)
{
    tBTA_DM_API_BLE_SCAN_PARAMS *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_SCAN_PARAMS *)osi_malloc(sizeof(tBTA_DM_API_BLE_SCAN_PARAMS))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SCAN_PARAMS));
        p_msg->hdr.event = BTA_DM_API_BLE_SCAN_PARAM_EVT;
        p_msg->client_if = client_if;
        p_msg->scan_int = scan_interval;
        p_msg->scan_window = scan_window;
        p_msg->scan_mode = scan_mode;
        p_msg->scan_param_setup_cback = scan_param_setup_cback;

        bta_sys_sendmsg(p_msg);
    }
}


/*******************************************************************************
**
** Function         BTA_DmSetBleScanFilterParams
**
** Description      This function is called to set scan parameters
**
** Parameters:      client_if - Client IF
**                  scan_interval - scan interval
**                  scan_window - scan window
**                  scan_mode - scan mode
**                  scan_duplicate_filter - scan duplicate filter
**                  scan_param_setup_status_cback - Set scan param status callback
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetBleScanFilterParams(tGATT_IF client_if, UINT32 scan_interval,
                                  UINT32 scan_window, tBLE_SCAN_MODE scan_mode, UINT8 scan_fil_poilcy,
                                  UINT8 addr_type_own, UINT8 scan_duplicate_filter, tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback)
{
    tBTA_DM_API_BLE_SCAN_FILTER_PARAMS *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_SCAN_FILTER_PARAMS *)osi_malloc(sizeof(tBTA_DM_API_BLE_SCAN_FILTER_PARAMS))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SCAN_FILTER_PARAMS));
        p_msg->hdr.event = BTA_DM_API_BLE_SCAN_FIL_PARAM_EVT;
        p_msg->client_if = client_if;
        p_msg->scan_int = scan_interval;
        p_msg->scan_window = scan_window;
        p_msg->scan_mode = scan_mode;
        p_msg->addr_type_own = addr_type_own;
        p_msg->scan_duplicate_filter = scan_duplicate_filter;
        p_msg->scan_filter_policy = scan_fil_poilcy;
        p_msg->scan_param_setup_cback = scan_param_setup_cback;

        bta_sys_sendmsg(p_msg);
    }


}

/*******************************************************************************
**
** Function         BTA_DmSetBleAdvParams
**
** Description      This function sets the advertising parameters BLE functionality.
**                  It is to be called when device act in peripheral or broadcaster
**                  role.
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSetBleAdvParams (UINT16 adv_int_min, UINT16 adv_int_max,
                            tBLE_BD_ADDR *p_dir_bda)
{
#if BLE_INCLUDED == TRUE
    tBTA_DM_API_BLE_ADV_PARAMS    *p_msg;

    APPL_TRACE_API ("BTA_DmSetBleAdvParam: %d, %d\n", adv_int_min, adv_int_max);

    if ((p_msg = (tBTA_DM_API_BLE_ADV_PARAMS *) osi_malloc(sizeof(tBTA_DM_API_BLE_ADV_PARAMS)
                 + sizeof(tBLE_BD_ADDR))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_ADV_PARAMS) + sizeof(tBLE_BD_ADDR));

        p_msg->hdr.event = BTA_DM_API_BLE_ADV_PARAM_EVT;

        p_msg->adv_int_min      = adv_int_min;
        p_msg->adv_int_max      = adv_int_max;

        if (p_dir_bda != NULL) {
            p_msg->p_dir_bda = (tBLE_BD_ADDR *)(p_msg + 1);
            memcpy(p_msg->p_dir_bda, p_dir_bda, sizeof(tBLE_BD_ADDR));
        }

        bta_sys_sendmsg(p_msg);
    }
#endif
}

void BTA_DmSetBleAdvParamsAll (UINT16 adv_int_min, UINT16 adv_int_max,
                               UINT8 adv_type, tBLE_ADDR_TYPE addr_type_own,
                               tBTM_BLE_ADV_CHNL_MAP chnl_map, tBTM_BLE_AFP adv_fil_pol,
                               tBLE_BD_ADDR *p_dir_bda, tBTA_START_ADV_CMPL_CBACK p_start_adv_cb)
{
#if BLE_INCLUDED == TRUE
    tBTA_DM_API_BLE_ADV_PARAMS_ALL    *p_msg;

    APPL_TRACE_API ("BTA_DmSetBleAdvParamsAll: %d, %d\n", adv_int_min, adv_int_max);
    APPL_TRACE_API ("adv_type = %d, addr_type_own = %d, chnl_map = %d, adv_fil_pol = %d\n",
                      adv_type, addr_type_own, chnl_map, adv_fil_pol);
    if ((p_msg = (tBTA_DM_API_BLE_ADV_PARAMS_ALL *) osi_malloc(sizeof(tBTA_DM_API_BLE_ADV_PARAMS_ALL)
                 + sizeof(tBLE_BD_ADDR))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_ADV_PARAMS_ALL));

        p_msg->hdr.event = BTA_DM_API_BLE_ADV_PARAM_All_EVT;

        p_msg->adv_int_min      = adv_int_min;
        p_msg->adv_int_max      = adv_int_max;
        p_msg->adv_type         = adv_type;
        p_msg->addr_type_own    = addr_type_own;
        p_msg->channel_map      = chnl_map;
        p_msg->adv_filter_policy    = adv_fil_pol;
        p_msg->p_start_adv_cback    = p_start_adv_cb;
        if (p_dir_bda != NULL) {
            p_msg->p_dir_bda = (tBLE_BD_ADDR *)(p_msg + 1);
            memcpy(p_msg->p_dir_bda, p_dir_bda, sizeof(tBLE_BD_ADDR));
        }

        bta_sys_sendmsg(p_msg);
    }
#endif
}
#endif  ///BLE_INCLUDED == TRUE


/*******************************************************************************
**                      BLE ADV data management API
********************************************************************************/

#if BLE_INCLUDED == TRUE
/*******************************************************************************
**
** Function         BTA_DmBleSetAdvConfig
**
** Description      This function is called to override the BTA default ADV parameters.
**
** Parameters       data_mask: adv data mask.
**                  p_adv_cfg: Pointer to User defined ADV data structure. This
**                             memory space can not be freed until p_adv_data_cback
**                             is received.
**                  p_adv_data_cback: set adv data complete callback.
**
** Returns          None
**
*******************************************************************************/
void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_adv_cfg,
                            tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback)
{
    tBTA_DM_API_SET_ADV_CONFIG  *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_ADV_CONFIG *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_ADV_CONFIG))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SET_ADV_CONFIG_EVT;
        p_msg->data_mask = data_mask;
        p_msg->p_adv_data_cback = p_adv_data_cback;
        p_msg->p_adv_cfg = p_adv_cfg;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSetAdvConfigRaw
**
** Description      This function is called to set raw Advertising data
**
** Parameters       p_raw_adv : raw advertising data.
**                  raw_adv_len : raw advertising data length.
**                  p_adv_data_cback : set adv data complete callback.
**
** Returns          None
**
*******************************************************************************/
void BTA_DmBleSetAdvConfigRaw (UINT8 *p_raw_adv, UINT32 raw_adv_len,
                            tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback)
{
    tBTA_DM_API_SET_ADV_CONFIG_RAW  *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_ADV_CONFIG_RAW *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_ADV_CONFIG_RAW) + raw_adv_len)) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SET_ADV_CONFIG_RAW_EVT;
        p_msg->p_adv_data_cback = p_adv_data_cback;
        p_msg->p_raw_adv = (UINT8 *)(p_msg + 1);
        memcpy(p_msg->p_raw_adv, p_raw_adv, raw_adv_len);
        p_msg->raw_adv_len = raw_adv_len;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSetLongAdv
**
** Description      This function is called to set long Advertising data
**
** Parameters       adv_data : long advertising data.
**                  adv_data_len : long advertising data length.
**                  p_adv_data_cback : set long adv data complete callback.
**
** Returns          None
**
*******************************************************************************/
void BTA_DmBleSetLongAdv (UINT8 *adv_data, UINT32 adv_data_len,
                            tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback)
{
    tBTA_DM_API_SET_LONG_ADV  *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_LONG_ADV *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_LONG_ADV))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SET_LONG_ADV_EVT;
        p_msg->p_adv_data_cback = p_adv_data_cback;
        p_msg->adv_data = adv_data;
        p_msg->adv_data_len = adv_data_len;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSetScanRsp
**
** Description      This function is called to override the BTA scan response.
**
** Parameters       Pointer to User defined ADV data structure
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleSetScanRsp (tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_adv_cfg,
                                 tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback)
{
    tBTA_DM_API_SET_ADV_CONFIG  *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_ADV_CONFIG *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_ADV_CONFIG))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SET_SCAN_RSP_EVT;
        p_msg->data_mask = data_mask;
        p_msg->p_adv_data_cback = p_adv_data_cback;
        p_msg->p_adv_cfg = p_adv_cfg;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSetScanRspRaw
**
** Description      This function is called to set raw scan response data
**
** Parameters       p_raw_scan_rsp : raw scan_rspertising data.
**                  raw_scan_rsp_len : raw scan_rspertising data length.
**                  p_scan_rsp_data_cback : set scan_rsp data complete callback.
**
** Returns          None
**
*******************************************************************************/
void BTA_DmBleSetScanRspRaw (UINT8 *p_raw_scan_rsp, UINT32 raw_scan_rsp_len,
                            tBTA_SET_ADV_DATA_CMPL_CBACK *p_scan_rsp_data_cback)
{
    tBTA_DM_API_SET_ADV_CONFIG_RAW  *p_msg;

    if ((p_msg = (tBTA_DM_API_SET_ADV_CONFIG_RAW *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_ADV_CONFIG_RAW) + raw_scan_rsp_len)) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SET_SCAN_RSP_RAW_EVT;
        p_msg->p_adv_data_cback = p_scan_rsp_data_cback;
        p_msg->p_raw_adv = (UINT8 *)(p_msg + 1);
        memcpy(p_msg->p_raw_adv, p_raw_scan_rsp, raw_scan_rsp_len);
        p_msg->raw_adv_len = raw_scan_rsp_len;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmUpdateDuplicateExceptionalList
**
** Description      This function is called to update duplicate scan exceptional list
**
** Parameters       subcode : add, remove or clean duplicate scan exceptional list.
**                  type : device info type.
**                  device_info:  device info
**                  p_update_duplicate_ignore_list_cback :  update complete callback.
**
** Returns          None
**
*******************************************************************************/
void BTA_DmUpdateDuplicateExceptionalList(UINT8 subcode, UINT32 type, BD_ADDR device_info, tBTA_UPDATE_DUPLICATE_EXCEPTIONAL_LIST_CMPL_CBACK p_update_duplicate_exceptional_list_cback)
{
    tBTA_DM_API_UPDATE_DUPLICATE_EXCEPTIONAL_LIST *p_msg;
    if ((p_msg = (tBTA_DM_API_UPDATE_DUPLICATE_EXCEPTIONAL_LIST *)osi_malloc(sizeof(tBTA_DM_API_UPDATE_DUPLICATE_EXCEPTIONAL_LIST))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_UPDATE_DUPLICATE_EXCEPTIONAL_LIST_EVT;
        p_msg->subcode = subcode;
        p_msg->type = type;
        p_msg->exceptional_list_cb = p_update_duplicate_exceptional_list_cback;
        memcpy(p_msg->device_info, device_info, sizeof(BD_ADDR));

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleSetStorageParams
**
** Description      This function is called to override the BTA scan response.
**
** Parameters       batch_scan_full_max -Max storage space (in %) allocated to full scanning
**                  batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning
**                  batch_scan_notify_threshold -Setup notification level based on total space
**                  p_setup_cback - Setup callback pointer
**                  p_thres_cback - Threshold callback pointer
**                  p_rep_cback - Reports callback pointer
**                  ref_value - Ref value
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleSetStorageParams(UINT8 batch_scan_full_max,
                                      UINT8 batch_scan_trunc_max,
                                      UINT8 batch_scan_notify_threshold,
                                      tBTA_BLE_SCAN_SETUP_CBACK *p_setup_cback,
                                      tBTA_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback,
                                      tBTA_BLE_SCAN_REP_CBACK *p_rep_cback,
                                      tBTA_DM_BLE_REF_VALUE ref_value)
{
    tBTA_DM_API_SET_STORAGE_CONFIG  *p_msg;
    bta_dm_cb.p_setup_cback = p_setup_cback;
    if ((p_msg = (tBTA_DM_API_SET_STORAGE_CONFIG *)
                 osi_malloc(sizeof(tBTA_DM_API_SET_STORAGE_CONFIG))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_SETUP_STORAGE_EVT;
        p_msg->p_setup_cback = bta_ble_scan_setup_cb;
        p_msg->p_thres_cback = p_thres_cback;
        p_msg->p_read_rep_cback = p_rep_cback;
        p_msg->ref_value = ref_value;
        p_msg->batch_scan_full_max = batch_scan_full_max;
        p_msg->batch_scan_trunc_max = batch_scan_trunc_max;
        p_msg->batch_scan_notify_threshold = batch_scan_notify_threshold;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleEnableBatchScan
**
** Description      This function is called to enable the batch scan
**
** Parameters       scan_mode -Batch scan mode
**                  scan_interval - Scan interval
**                  scan_window - Scan window
**                  discard_rule -Discard rules
**                  addr_type - Address type
**                  ref_value - Reference value
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode,
                                     UINT32 scan_interval, UINT32 scan_window,
                                     tBTA_BLE_DISCARD_RULE discard_rule,
                                     tBLE_ADDR_TYPE        addr_type,
                                     tBTA_DM_BLE_REF_VALUE ref_value)
{
    tBTA_DM_API_ENABLE_SCAN  *p_msg;

    if ((p_msg = (tBTA_DM_API_ENABLE_SCAN *) osi_malloc(sizeof(tBTA_DM_API_ENABLE_SCAN))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_ENABLE_BATCH_SCAN_EVT;
        p_msg->scan_mode = scan_mode;
        p_msg->scan_int = scan_interval;
        p_msg->scan_window = scan_window;
        p_msg->discard_rule = discard_rule;
        p_msg->addr_type = addr_type;
        p_msg->ref_value = ref_value;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleDisableBatchScan
**
** Description      This function is called to disable the batch scan
**
** Parameters       ref_value - Reference value
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value)
{
    tBTA_DM_API_DISABLE_SCAN  *p_msg;

    if ((p_msg = (tBTA_DM_API_DISABLE_SCAN *)
                 osi_malloc(sizeof(tBTA_DM_API_DISABLE_SCAN))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_DISABLE_BATCH_SCAN_EVT;
        p_msg->ref_value = ref_value;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleReadScanReports
**
** Description      This function is called to read scan reports
**
** Parameters       scan_type -Batch scan mode
**                  ref_value - Reference value
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type,
                                     tBTA_DM_BLE_REF_VALUE ref_value)
{
    tBTA_DM_API_READ_SCAN_REPORTS  *p_msg;

    if ((p_msg = (tBTA_DM_API_READ_SCAN_REPORTS *)
                 osi_malloc(sizeof(tBTA_DM_API_READ_SCAN_REPORTS))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_READ_SCAN_REPORTS_EVT;
        p_msg->scan_type = scan_type;
        p_msg->ref_value = ref_value;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleTrackAdvertiser
**
** Description      This function is called to track advertiser
**
** Parameters       ref_value - Reference value
**                  p_track_adv_cback - Track ADV callback
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleTrackAdvertiser(tBTA_DM_BLE_REF_VALUE ref_value,
                                     tBTA_BLE_TRACK_ADV_CBACK *p_track_adv_cback)
{
    tBTA_DM_API_TRACK_ADVERTISER  *p_msg;

    if ((p_msg = (tBTA_DM_API_TRACK_ADVERTISER *)
                 osi_malloc(sizeof(tBTA_DM_API_TRACK_ADVERTISER))) != NULL) {
        p_msg->hdr.event = BTA_DM_API_BLE_TRACK_ADVERTISER_EVT;
        p_msg->p_track_adv_cback = p_track_adv_cback;
        p_msg->ref_value = ref_value;
        bta_sys_sendmsg(p_msg);
    }
}

#endif

/*******************************************************************************
**                      BLE ADV data management API
********************************************************************************/
#if BLE_INCLUDED == TRUE

/*******************************************************************************
**
** Function         BTA_DmBleBroadcast
**
** Description      This function starts or stops LE broadcasting.
**
** Parameters       start: start or stop broadcast.
**
** Returns          None
**
*******************************************************************************/
extern void BTA_DmBleBroadcast (BOOLEAN start, tBTA_START_STOP_ADV_CMPL_CBACK *p_start_stop_adv_cb)
{
    tBTA_DM_API_BLE_OBSERVE   *p_msg;

    APPL_TRACE_API("BTA_DmBleBroadcast: start = %d \n", start);

    if ((p_msg = (tBTA_DM_API_BLE_OBSERVE *) osi_malloc(sizeof(tBTA_DM_API_BLE_OBSERVE))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_OBSERVE));

        p_msg->hdr.event = BTA_DM_API_BLE_BROADCAST_EVT;
        p_msg->start = start;
        if (start == FALSE){
            p_msg->p_stop_adv_cback= p_start_stop_adv_cb;
        }

        bta_sys_sendmsg(p_msg);
    }
}

#endif
/*******************************************************************************
**
** Function         BTA_DmBleSetBgConnType
**
** Description      This function is called to set BLE connectable mode for a
**                  peripheral device.
**
** Parameters       bg_conn_type: it can be auto connection, or selective connection.
**                  p_select_cback: callback function when selective connection procedure
**                              is being used.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback)
{
#if BLE_INCLUDED == TRUE
    tBTA_DM_API_BLE_SET_BG_CONN_TYPE    *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_SET_BG_CONN_TYPE *) osi_malloc(sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE));

        p_msg->hdr.event        = BTA_DM_API_BLE_SET_BG_CONN_TYPE;
        p_msg->bg_conn_type     = bg_conn_type;
        p_msg->p_select_cback   = p_select_cback;

        bta_sys_sendmsg(p_msg);
    }
#endif
}

/*******************************************************************************
**
** Function         bta_dm_discover_send_msg
**
** Description      This function send discover message to BTA task.
**
** Returns          void
**
*******************************************************************************/
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE && SDP_INCLUDED == TRUE
static void bta_dm_discover_send_msg(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
                                     tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search,
                                     tBTA_TRANSPORT transport)
{
    tBTA_DM_API_DISCOVER    *p_msg;
    UINT16  len = p_services ? (sizeof(tBTA_DM_API_DISCOVER) +
                                sizeof(tBT_UUID) * p_services->num_uuid) :
                  sizeof(tBTA_DM_API_DISCOVER);

    if ((p_msg = (tBTA_DM_API_DISCOVER *) osi_malloc(len)) != NULL) {
        memset(p_msg, 0, len);

        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->p_cback = p_cback;
        p_msg->sdp_search = sdp_search;
        p_msg->transport    = transport;

        if (p_services != NULL) {
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
            p_msg->services = p_services->srvc_mask;
            p_msg->num_uuid = p_services->num_uuid;
            if (p_services->num_uuid != 0) {
                p_msg->p_uuid = (tBT_UUID *)(p_msg + 1);
                memcpy(p_msg->p_uuid, p_services->p_uuid, sizeof(tBT_UUID) * p_services->num_uuid);
            }
#endif
        }

        bta_sys_sendmsg(p_msg);
    }
}
#endif
/*******************************************************************************
**
** Function         BTA_DmDiscoverByTransport
**
** Description      This function does service discovery on particular transport
**                  for services of a
**                  peer device. When services.num_uuid is 0, it indicates all
**                  GATT based services are to be searched; otherwise a list of
**                  UUID of interested services should be provided through
**                  p_services->p_uuid.
**
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
                               tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search,
                               tBTA_TRANSPORT transport)
{
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE && SDP_INCLUDED == TRUE
    bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, transport);
#endif
}


/*******************************************************************************
**
** Function         BTA_DmDiscoverExt
**
** Description      This function does service discovery for services of a
**                  peer device. When services.num_uuid is 0, it indicates all
**                  GATT based services are to be searched; other wise a list of
**                  UUID of interested services should be provided through
**                  p_services->p_uuid.
**
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
                       tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
{
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE && SDP_INCLUDED == TRUE
    bta_dm_discover_send_msg(bd_addr, p_services, p_cback, sdp_search, BTA_TRANSPORT_UNKNOWN);
#endif

}

/*******************************************************************************
**
** Function         BTA_DmSearchExt
**
** Description      This function searches for peer Bluetooth devices. It performs
**                  an inquiry and gets the remote name for devices. Service
**                  discovery is done if services is non zero
**
** Parameters       p_dm_inq: inquiry conditions
**                  p_services: if service is not empty, service discovery will be done.
**                            for all GATT based service condition, put num_uuid, and
**                            p_uuid is the pointer to the list of UUID values.
**                  p_cback: callback functino when search is completed.
**
**
**
** Returns          void
**
*******************************************************************************/
void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, tBTA_DM_SEARCH_CBACK *p_cback)
{
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
    tBTA_DM_API_SEARCH    *p_msg;
    UINT16  len = p_services ? (sizeof(tBTA_DM_API_SEARCH) + sizeof(tBT_UUID) * p_services->num_uuid) :
                  sizeof(tBTA_DM_API_SEARCH);

    if ((p_msg = (tBTA_DM_API_SEARCH *) osi_malloc(len)) != NULL) {
        memset(p_msg, 0, len);

        p_msg->hdr.event = BTA_DM_API_SEARCH_EVT;
        memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ));
        p_msg->p_cback = p_cback;
        p_msg->rs_res  = BTA_DM_RS_NONE;


        if (p_services != NULL) {
            p_msg->services = p_services->srvc_mask;
            p_msg->num_uuid = p_services->num_uuid;

            if (p_services->num_uuid != 0) {
                p_msg->p_uuid = (tBT_UUID *)(p_msg + 1);
                memcpy(p_msg->p_uuid, p_services->p_uuid, sizeof(tBT_UUID) * p_services->num_uuid);
            } else {
                p_msg->p_uuid = NULL;
            }
        }

        bta_sys_sendmsg(p_msg);
    }
#else
    UNUSED(p_dm_inq);
    UNUSED(p_services);
    UNUSED(p_cback);
#endif
}
/*******************************************************************************
**
** Function         BTA_DmBleUpdateConnectionParam
**
** Description      Update connection parameters, can only be used when connection is up.
**
** Parameters:      bd_addr          - BD address of the peer
**                  min_int   -     minimum connection interval, [0x0004~ 0x4000]
**                  max_int   -     maximum connection interval, [0x0004~ 0x4000]
**                  latency   -     slave latency [0 ~ 500]
**                  timeout   -     supervision timeout [0x000a ~ 0xc80]
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleUpdateConnectionParam(BD_ADDR bd_addr, UINT16 min_int,
                                    UINT16 max_int, UINT16 latency,
                                    UINT16 timeout)
{
#if BLE_INCLUDED == TRUE
    tBTA_DM_API_UPDATE_CONN_PARAM *p_msg;

    p_msg = (tBTA_DM_API_UPDATE_CONN_PARAM *) osi_malloc(sizeof(tBTA_DM_API_UPDATE_CONN_PARAM));
    if (p_msg != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_UPDATE_CONN_PARAM));

        p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->min_int   = min_int;
        p_msg->max_int   = max_int;
        p_msg->latency   = latency;
        p_msg->timeout   = timeout;

        bta_sys_sendmsg(p_msg);
    }
#endif
}

#if BLE_INCLUDED == TRUE
/*******************************************************************************
**
** Function         BTA_DmBleConfigLocalPrivacy
**
** Description      Enable/disable privacy on the local device
**
** Parameters:      privacy_enable   - enable/disabe privacy on remote device.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleConfigLocalPrivacy(BOOLEAN privacy_enable, tBTA_SET_LOCAL_PRIVACY_CBACK *set_local_privacy_cback)
{
    ///This function used the irk to generate the resolve address
#if BLE_INCLUDED == TRUE && BLE_PRIVACY_SPT == TRUE
    tBTA_DM_API_LOCAL_PRIVACY *p_msg;

    if ((p_msg = (tBTA_DM_API_LOCAL_PRIVACY *) osi_malloc(sizeof(tBTA_DM_API_ENABLE_PRIVACY))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_LOCAL_PRIVACY));

        p_msg->hdr.event = BTA_DM_API_LOCAL_PRIVACY_EVT;
        p_msg->privacy_enable   = privacy_enable;
        p_msg->set_local_privacy_cback = set_local_privacy_cback;
        bta_sys_sendmsg(p_msg);
    }
#else
    UNUSED (privacy_enable);
#endif
}

/*******************************************************************************
**
** Function         BTA_DmBleConfigLocalIcon
**
** Description      set gap local icon
**
** Parameters:      icon   - appearance value.
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleConfigLocalIcon(uint16_t icon)
{
    tBTA_DM_API_LOCAL_ICON *p_msg;

    if ((p_msg = (tBTA_DM_API_LOCAL_ICON *) osi_malloc(sizeof(tBTA_DM_API_LOCAL_ICON))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_LOCAL_ICON));

        p_msg->hdr.event = BTA_DM_API_LOCAL_ICON_EVT;
        p_msg->icon   = icon;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_BleEnableAdvInstance
**
** Description      This function enable a Multi-ADV instance with the specififed
**                  adv parameters
**
** Parameters       p_params: pointer to the adv parameter structure.
**                  p_cback: callback function associated to this adv instance.
**                  p_ref: reference data pointer to this adv instance.
**
** Returns          BTA_SUCCESS if command started sucessfully; otherwise failure.
**
*******************************************************************************/
void BTA_BleEnableAdvInstance (tBTA_BLE_ADV_PARAMS *p_params,
                               tBTA_BLE_MULTI_ADV_CBACK *p_cback,
                               void *p_ref)
{
    ///This function just used for vendor debug
    tBTA_DM_API_BLE_MULTI_ADV_ENB    *p_msg;
    UINT16 len = sizeof(tBTA_BLE_ADV_PARAMS) + sizeof(tBTA_DM_API_BLE_MULTI_ADV_ENB);

    APPL_TRACE_API ("BTA_BleEnableAdvInstance");

    if ((p_msg = (tBTA_DM_API_BLE_MULTI_ADV_ENB *) osi_malloc(len)) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_MULTI_ADV_ENB));

        p_msg->hdr.event     = BTA_DM_API_BLE_MULTI_ADV_ENB_EVT;
        p_msg->p_cback      = (void *)p_cback;
        if (p_params != NULL) {
            p_msg->p_params =  (void *)(p_msg + 1);
            memcpy(p_msg->p_params, p_params, sizeof(tBTA_BLE_ADV_PARAMS));
        }
        p_msg->p_ref        = p_ref;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_BleUpdateAdvInstParam
**
** Description      This function update a Multi-ADV instance with the specififed
**                  adv parameters.
**
** Parameters       inst_id: Adv instance to update the parameter.
**                  p_params: pointer to the adv parameter structure.
**
** Returns          BTA_SUCCESS if command started sucessfully; otherwise failure.
**
*******************************************************************************/
void BTA_BleUpdateAdvInstParam (UINT8 inst_id, tBTA_BLE_ADV_PARAMS *p_params)
{
    ///This function just used for vendor debug
    tBTA_DM_API_BLE_MULTI_ADV_PARAM    *p_msg;
    UINT16      len = sizeof(tBTA_BLE_ADV_PARAMS) + sizeof(tBTA_DM_API_BLE_MULTI_ADV_PARAM);

    APPL_TRACE_API ("BTA_BleUpdateAdvInstParam");
    if ((p_msg = (tBTA_DM_API_BLE_MULTI_ADV_PARAM *) osi_malloc(len)) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_MULTI_ADV_PARAM));
        p_msg->hdr.event     = BTA_DM_API_BLE_MULTI_ADV_PARAM_UPD_EVT;
        p_msg->inst_id        = inst_id;
        p_msg->p_params =  (void *)(p_msg + 1);
        memcpy(p_msg->p_params, p_params, sizeof(tBTA_BLE_ADV_PARAMS));

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_BleCfgAdvInstData
**
** Description      This function configure a Multi-ADV instance with the specififed
**                  adv data or scan response data.
**
** Parameter        inst_id: Adv instance to configure the adv data or scan response.
**                  is_scan_rsp: is the data scan response or adv data.
**                  data_mask: adv data type as bit mask.
**                  p_data: pointer to the ADV data structure tBTA_BLE_ADV_DATA. This
**                  memory space can not be freed until BTA_BLE_MULTI_ADV_DATA_EVT
**                  is sent to application.
**
** Returns          BTA_SUCCESS if command started sucessfully; otherwise failure.
**
*******************************************************************************/
void BTA_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp,
                            tBTA_BLE_AD_MASK data_mask,
                            tBTA_BLE_ADV_DATA *p_data)
{
    ///This function just used for vendor debug
    tBTA_DM_API_BLE_MULTI_ADV_DATA    *p_msg;
    UINT16      len =  sizeof(tBTA_DM_API_BLE_MULTI_ADV_DATA) ;

    APPL_TRACE_API ("BTA_BleCfgAdvInstData");

    if ((p_msg = (tBTA_DM_API_BLE_MULTI_ADV_DATA *) osi_malloc(len)) != NULL) {
        memset(p_msg, 0, len);
        p_msg->hdr.event     = BTA_DM_API_BLE_MULTI_ADV_DATA_EVT;
        p_msg->inst_id      = inst_id;
        p_msg->is_scan_rsp  = is_scan_rsp;
        p_msg->data_mask     = data_mask;
        p_msg->p_data        = p_data;

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_BleDisableAdvInstance
**
** Description      This function disable a Multi-ADV instance.
**
** Parameter        inst_id: instance ID to disable.
**
** Returns          BTA_SUCCESS if command started sucessfully; otherwise failure.
**
*******************************************************************************/
void BTA_BleDisableAdvInstance (UINT8  inst_id)     //this function just used for vendor debug
{
    tBTA_DM_API_BLE_MULTI_ADV_DISABLE    *p_msg;

    APPL_TRACE_API ("BTA_BleDisableAdvInstance: %d", inst_id);
    if ((p_msg = (tBTA_DM_API_BLE_MULTI_ADV_DISABLE *)
                 osi_malloc(sizeof(tBTA_DM_API_BLE_MULTI_ADV_DISABLE))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_MULTI_ADV_DISABLE));
        p_msg->hdr.event    = BTA_DM_API_BLE_MULTI_ADV_DISABLE_EVT;
        p_msg->inst_id      = inst_id;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleCfgFilterCondition
**
** Description      This function is called to configure the adv data payload filter
**                  condition.
**
** Parameters       action: to read/write/clear
**                  cond_type: filter condition type
**                  filt_index - Filter index
**                  p_cond: filter condition parameter
**                  p_cmpl_back - Command completed callback
**                  ref_value - Reference value
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action,
                                 tBTA_DM_BLE_PF_COND_TYPE cond_type,
                                 tBTA_DM_BLE_PF_FILT_INDEX filt_index,
                                 tBTA_DM_BLE_PF_COND_PARAM *p_cond,
                                 tBTA_DM_BLE_PF_CFG_CBACK *p_cmpl_cback,
                                 tBTA_DM_BLE_REF_VALUE ref_value)
{
#if BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE
    tBTA_DM_API_CFG_FILTER_COND *p_msg;
    APPL_TRACE_API ("BTA_DmBleCfgFilterCondition: %d, %d", action, cond_type);

    UINT16  len = sizeof(tBTA_DM_API_CFG_FILTER_COND) +
                  sizeof(tBTA_DM_BLE_PF_COND_PARAM);
    UINT8 *p;

    if (NULL != p_cond) {
        switch (cond_type) {
        case BTA_DM_BLE_PF_SRVC_DATA_PATTERN:
        case BTA_DM_BLE_PF_MANU_DATA:
            /* Length of pattern and pattern mask and other elements in */
            /* tBTA_DM_BLE_PF_MANU_COND */
            len += ((p_cond->manu_data.data_len) * 2) +
                   sizeof(UINT16) + sizeof(UINT16) + sizeof(UINT8);
            break;

        case BTA_DM_BLE_PF_LOCAL_NAME:
            len += ((p_cond->local_name.data_len) + sizeof(UINT8));
            break;

        case BTM_BLE_PF_SRVC_UUID:
        case BTM_BLE_PF_SRVC_SOL_UUID:
            len += sizeof(tBLE_BD_ADDR) + sizeof(tBTA_DM_BLE_PF_COND_MASK);
            break;

        default:
            break;
        }
    }

    if ((p_msg = (tBTA_DM_API_CFG_FILTER_COND *) osi_malloc(len)) != NULL) {
        memset (p_msg, 0, len);

        p_msg->hdr.event        = BTA_DM_API_CFG_FILTER_COND_EVT;
        p_msg->action           = action;
        p_msg->cond_type        = cond_type;
        p_msg->filt_index       = filt_index;
        p_msg->p_filt_cfg_cback = p_cmpl_cback;
        p_msg->ref_value        = ref_value;
        if (p_cond) {
            p_msg->p_cond_param = (tBTA_DM_BLE_PF_COND_PARAM *)(p_msg + 1);
            memcpy(p_msg->p_cond_param, p_cond, sizeof(tBTA_DM_BLE_PF_COND_PARAM));

            p = (UINT8 *)(p_msg->p_cond_param + 1);

            if (cond_type == BTA_DM_BLE_PF_SRVC_DATA_PATTERN ||
                    cond_type == BTA_DM_BLE_PF_MANU_DATA) {
                p_msg->p_cond_param->manu_data.p_pattern = p;
                p_msg->p_cond_param->manu_data.data_len = p_cond->manu_data.data_len;
                memcpy(p_msg->p_cond_param->manu_data.p_pattern, p_cond->manu_data.p_pattern,
                       p_cond->manu_data.data_len);
                p += p_cond->manu_data.data_len;

                if (cond_type == BTA_DM_BLE_PF_MANU_DATA) {
                    p_msg->p_cond_param->manu_data.company_id_mask =
                        p_cond->manu_data.company_id_mask;
                    if ( p_cond->manu_data.p_pattern_mask != NULL) {
                        p_msg->p_cond_param->manu_data.p_pattern_mask = p;
                        memcpy(p_msg->p_cond_param->manu_data.p_pattern_mask,
                               p_cond->manu_data.p_pattern_mask, p_cond->manu_data.data_len);
                    }
                }
            } else if (cond_type == BTA_DM_BLE_PF_LOCAL_NAME) {
                p_msg->p_cond_param->local_name.p_data = p;
                p_msg->p_cond_param->local_name.data_len =
                    p_cond->local_name.data_len;
                memcpy(p_msg->p_cond_param->local_name.p_data,
                       p_cond->local_name.p_data, p_cond->local_name.data_len);
            } else if ((cond_type == BTM_BLE_PF_SRVC_UUID
                        || cond_type == BTM_BLE_PF_SRVC_SOL_UUID)) {
                if (p_cond->srvc_uuid.p_target_addr != NULL) {
                    p_msg->p_cond_param->srvc_uuid.p_target_addr = (tBLE_BD_ADDR *)(p);
                    p_msg->p_cond_param->srvc_uuid.p_target_addr->type =
                        p_cond->srvc_uuid.p_target_addr->type;
                    memcpy(p_msg->p_cond_param->srvc_uuid.p_target_addr->bda,
                           p_cond->srvc_uuid.p_target_addr->bda, BD_ADDR_LEN);
                    p = (UINT8 *)( p_msg->p_cond_param->srvc_uuid.p_target_addr + 1);
                }
                if (p_cond->srvc_uuid.p_uuid_mask) {
                    p_msg->p_cond_param->srvc_uuid.p_uuid_mask = (tBTA_DM_BLE_PF_COND_MASK *)p;
                    memcpy(p_msg->p_cond_param->srvc_uuid.p_uuid_mask,
                           p_cond->srvc_uuid.p_uuid_mask, sizeof(tBTA_DM_BLE_PF_COND_MASK));
                }
            }
        }

        bta_sys_sendmsg(p_msg);
    }
#else
    UNUSED(action);
    UNUSED(cond_type);
    UNUSED(filt_index);
    UNUSED(p_cond);
    UNUSED(p_cmpl_cback);
    UNUSED(ref_value);
#endif
}

/*******************************************************************************
**
** Function         BTA_DmBleScanFilterSetup
**
** Description      This function is called to setup the adv data payload filter param
**
** Parameters       p_target: enable the filter condition on a target device; if NULL
**                  filt_index - Filter index
**                  p_filt_params -Filter parameters
**                  ref_value - Reference value
**                  action - Add, delete or clear
**                  p_cmpl_back - Command completed callback
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleScanFilterSetup(UINT8 action, tBTA_DM_BLE_PF_FILT_INDEX filt_index,
                              tBTA_DM_BLE_PF_FILT_PARAMS *p_filt_params,
                              tBLE_BD_ADDR *p_target,
                              tBTA_DM_BLE_PF_PARAM_CBACK *p_cmpl_cback,
                              tBTA_DM_BLE_REF_VALUE ref_value)
{
#if BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE
    tBTA_DM_API_SCAN_FILTER_PARAM_SETUP *p_msg;
    APPL_TRACE_API ("BTA_DmBleScanFilterSetup: %d", action);

    UINT16  len = sizeof(tBTA_DM_API_SCAN_FILTER_PARAM_SETUP) + sizeof(tBLE_BD_ADDR);

    if ((p_msg = (tBTA_DM_API_SCAN_FILTER_PARAM_SETUP *) osi_malloc(len)) != NULL) {
        memset (p_msg, 0, len);

        p_msg->hdr.event        = BTA_DM_API_SCAN_FILTER_SETUP_EVT;
        p_msg->action       = action;
        p_msg->filt_index = filt_index;
        if (p_filt_params) {
            memcpy(&p_msg->filt_params, p_filt_params, sizeof(tBTA_DM_BLE_PF_FILT_PARAMS));
        }
        p_msg->p_filt_param_cback = p_cmpl_cback;
        p_msg->ref_value        = ref_value;

        if (p_target) {
            p_msg->p_target = (tBLE_BD_ADDR *)(p_msg + 1);
            memcpy(p_msg->p_target, p_target, sizeof(tBLE_BD_ADDR));
        }

        bta_sys_sendmsg(p_msg);
    }
#else
    UNUSED(action);
    UNUSED(filt_index);
    UNUSED(p_filt_params);
    UNUSED(p_target);
    UNUSED(p_cmpl_cback);
    UNUSED(ref_value);
#endif
}

/*******************************************************************************
**
** Function         BTA_DmBleGetEnergyInfo
**
** Description      This function is called to obtain the energy info
**
** Parameters       p_cmpl_cback - Command complete callback
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK *p_cmpl_cback)
{
    tBTA_DM_API_ENERGY_INFO *p_msg;
    APPL_TRACE_API ("BTA_DmBleGetEnergyInfo");

    UINT16  len = sizeof(tBTA_DM_API_ENERGY_INFO) + sizeof(tBLE_BD_ADDR);

    if ((p_msg = (tBTA_DM_API_ENERGY_INFO *) osi_malloc(len)) != NULL) {
        memset (p_msg, 0, len);
        p_msg->hdr.event        = BTA_DM_API_BLE_ENERGY_INFO_EVT;
        p_msg->p_energy_info_cback = p_cmpl_cback;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmEnableScanFilter
**
** Description      This function is called to enable the adv data payload filter
**
** Parameters       action - enable or disable the APCF feature
**                  p_cmpl_cback - Command completed callback
**                  ref_value - Reference value
**
** Returns          void
**
*******************************************************************************/
void BTA_DmEnableScanFilter(UINT8 action, tBTA_DM_BLE_PF_STATUS_CBACK *p_cmpl_cback,
                            tBTA_DM_BLE_REF_VALUE ref_value)
{
#if BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE
    tBTA_DM_API_ENABLE_SCAN_FILTER *p_msg;
    APPL_TRACE_API ("BTA_DmEnableScanFilter: %d\n", action);

    UINT16  len = sizeof(tBTA_DM_API_ENABLE_SCAN_FILTER) + sizeof(tBLE_BD_ADDR);

    if ((p_msg = (tBTA_DM_API_ENABLE_SCAN_FILTER *) osi_malloc(len)) != NULL) {
        memset (p_msg, 0, len);

        p_msg->hdr.event        = BTA_DM_API_SCAN_FILTER_ENABLE_EVT;
        p_msg->action       = action;
        p_msg->ref_value    = ref_value;
        p_msg->p_filt_status_cback = p_cmpl_cback;

        bta_sys_sendmsg(p_msg);
    }
#else
    UNUSED(action);
    UNUSED(p_cmpl_cback);
    UNUSED(ref_value);
#endif
}

/*******************************************************************************
**
** Function         BTA_DmBleUpdateConnectionParams
**
** Description      Update connection parameters, can only be used when connection is up.
**
** Parameters:      bd_addr   - BD address of the peer
**                  min_int   -     minimum connection interval, [0x0004~ 0x4000]
**                  max_int   -     maximum connection interval, [0x0004~ 0x4000]
**                  latency   -     slave latency [0 ~ 500]
**                  timeout   -     supervision timeout [0x000a ~ 0xc80]
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleUpdateConnectionParams(BD_ADDR bd_addr, UINT16 min_int, UINT16 max_int,
                                     UINT16 latency, UINT16 timeout)
{
    tBTA_DM_API_UPDATE_CONN_PARAM *p_msg;

    if ((p_msg = (tBTA_DM_API_UPDATE_CONN_PARAM *) osi_malloc(sizeof(tBTA_DM_API_UPDATE_CONN_PARAM))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_UPDATE_CONN_PARAM));

        p_msg->hdr.event = BTA_DM_API_UPDATE_CONN_PARAM_EVT;
        bdcpy(p_msg->bd_addr, bd_addr);
        p_msg->min_int   = min_int;
        p_msg->max_int   = max_int;
        p_msg->latency   = latency;
        p_msg->timeout   = timeout;
        bta_sys_sendmsg(p_msg);
    }
}
/*******************************************************************************
**
** Function         BTA_DmBleDisconnect
**
** Description      Disconnect the ble connection, can only be used when connection is up.
**
** Parameters:      bd_addr   - BD address of the peer
**
** Returns          void
**
*******************************************************************************/
void BTA_DmBleDisconnect(BD_ADDR bd_addr)
{
    tBTA_DM_API_BLE_DISCONNECT *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_DISCONNECT *) osi_malloc(sizeof(tBTA_DM_API_BLE_DISCONNECT))) != NULL) {
        memset (p_msg, 0, sizeof(tBTA_DM_API_BLE_DISCONNECT));

        p_msg->hdr.event = BTA_DM_API_BLE_DISCONNECT_EVT;
        bdcpy(p_msg->remote_bda, bd_addr);

        bta_sys_sendmsg(p_msg);
    }
}
/*******************************************************************************
**
** Function         BTA_DmBleSetDataLength
**
** Description      This function is to set maximum LE data packet size
**
** Returns          void
**
**
*******************************************************************************/
void BTA_DmBleSetDataLength(BD_ADDR remote_device, UINT16 tx_data_length, tBTA_SET_PKT_DATA_LENGTH_CBACK *p_set_pkt_data_cback)
{
    tBTA_DM_API_BLE_SET_DATA_LENGTH *p_msg;

    if ((p_msg = (tBTA_DM_API_BLE_SET_DATA_LENGTH *)osi_malloc(sizeof(tBTA_DM_API_BLE_SET_DATA_LENGTH)))
            != NULL) {
        bdcpy(p_msg->remote_bda, remote_device);
        p_msg->hdr.event = BTA_DM_API_SET_DATA_LENGTH_EVT;
        p_msg->tx_data_length = tx_data_length;
        p_msg->p_set_pkt_data_cback = p_set_pkt_data_cback;

        bta_sys_sendmsg(p_msg);
    }
}

#endif

/*******************************************************************************
**
** Function         BTA_DmSetEncryption
**
** Description      This function is called to ensure that connection is
**                  encrypted.  Should be called only on an open connection.
**                  Typically only needed for connections that first want to
**                  bring up unencrypted links, then later encrypt them.
**
** Parameters:      bd_addr       - Address of the peer device
**                  transport     - transport of the link to be encruypted
**                  p_callback    - Pointer to callback function to indicat the
**                                  link encryption status
**                  sec_act       - This is the security action to indicate
**                                  what kind of BLE security level is required for
**                                  the BLE link if the BLE is supported
**                                  Note: This parameter is ignored for the BR/EDR link
**                                        or the BLE is not supported
**
** Returns          void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport, tBTA_DM_ENCRYPT_CBACK *p_callback,
                         tBTA_DM_BLE_SEC_ACT sec_act)
{
    tBTA_DM_API_SET_ENCRYPTION   *p_msg;

    APPL_TRACE_API("BTA_DmSetEncryption"); //todo
    if ((p_msg = (tBTA_DM_API_SET_ENCRYPTION *) osi_malloc(sizeof(tBTA_DM_API_SET_ENCRYPTION))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_SET_ENCRYPTION));

        p_msg->hdr.event = BTA_DM_API_SET_ENCRYPTION_EVT;

        memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN);
        p_msg->transport    = transport;
        p_msg->p_callback      = p_callback;
        p_msg->sec_act         = sec_act;

        bta_sys_sendmsg(p_msg);
    }
}
#endif  ///SMP_INCLUDED == TRUE

/*******************************************************************************
**
** Function         BTA_DmCloseACL
**
** Description      This function force to close an ACL connection and remove the
**                  device from the security database list of known devices.
**
** Parameters:      bd_addr       - Address of the peer device
**                  remove_dev    - remove device or not after link down
**
** Returns          void
**
*******************************************************************************/
void BTA_DmCloseACL(BD_ADDR bd_addr, BOOLEAN remove_dev, tBTA_TRANSPORT transport)
{
    tBTA_DM_API_REMOVE_ACL   *p_msg;

    APPL_TRACE_API("BTA_DmCloseACL");

    if ((p_msg = (tBTA_DM_API_REMOVE_ACL *) osi_malloc(sizeof(tBTA_DM_API_REMOVE_ACL))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_REMOVE_ACL));

        p_msg->hdr.event = BTA_DM_API_REMOVE_ACL_EVT;

        memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN);
        p_msg->remove_dev      = remove_dev;
        p_msg->transport       = transport;

        bta_sys_sendmsg(p_msg);
    }
}

#if BLE_INCLUDED == TRUE
/*******************************************************************************
**
** Function         BTA_DmBleObserve
**
** Description      This procedure keep the device listening for advertising
**                  events from a broadcast device.
**
** Parameters       start: start or stop observe.
**
** Returns          void

**
** Returns          void.
**
*******************************************************************************/
extern void BTA_DmBleObserve(BOOLEAN start, UINT32 duration,
                             tBTA_DM_SEARCH_CBACK *p_results_cb,
                             tBTA_START_STOP_SCAN_CMPL_CBACK *p_start_stop_scan_cb)
{
    tBTA_DM_API_BLE_OBSERVE   *p_msg;

    APPL_TRACE_API("BTA_DmBleObserve:start = %d ", start);

    if ((p_msg = (tBTA_DM_API_BLE_OBSERVE *) osi_malloc(sizeof(tBTA_DM_API_BLE_OBSERVE))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_OBSERVE));

        p_msg->hdr.event = BTA_DM_API_BLE_OBSERVE_EVT;
        p_msg->start = start;
        p_msg->duration = duration;
        p_msg->p_cback = p_results_cb;
        if (start){
            p_msg->p_start_scan_cback = p_start_stop_scan_cb;
        }
        else {
            p_msg->p_stop_scan_cback = p_start_stop_scan_cb;
        }

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleScan
**
** Description      This procedure keep the device listening for advertising
**                  events from a broadcast device.
**
** Parameters       start: start or stop scan.
**
** Returns          void

**
** Returns          void.
**
*******************************************************************************/
extern void BTA_DmBleScan(BOOLEAN start, UINT32 duration,
                             tBTA_DM_SEARCH_CBACK *p_results_cb,
                             tBTA_START_STOP_SCAN_CMPL_CBACK *p_start_stop_scan_cb)
{
    tBTA_DM_API_BLE_SCAN   *p_msg;

    APPL_TRACE_API("BTA_DmBleScan:start = %d ", start);

    if ((p_msg = (tBTA_DM_API_BLE_SCAN *) osi_malloc(sizeof(tBTA_DM_API_BLE_SCAN))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SCAN));

        p_msg->hdr.event = BTA_DM_API_BLE_SCAN_EVT;
        p_msg->start = start;
        p_msg->duration = duration;
        p_msg->p_cback = p_results_cb;
        if (start){
            p_msg->p_start_scan_cback = p_start_stop_scan_cb;
        }
        else {
            p_msg->p_stop_scan_cback = p_start_stop_scan_cb;
        }

        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_DmBleStopAdvertising
**
** Description      This function set the random address for the APP
**
** Parameters       void
**
** Returns          void
**
**
*******************************************************************************/
extern void BTA_DmBleStopAdvertising(void)
{
    BT_HDR   *p_msg;

    APPL_TRACE_API("BTA_DmBleStopAdvertising\n");

    if ((p_msg = (BT_HDR *) osi_malloc(sizeof(BT_HDR))) != NULL) {
        memset(p_msg, 0, sizeof(BT_HDR));
        p_msg->event = BTA_DM_API_BLE_STOP_ADV_EVT;
        bta_sys_sendmsg(p_msg);
    }
}


/*******************************************************************************
**
** Function         BTA_DmSetRandAddress
**
** Description      This function set the random address for the APP
**
** Parameters       rand_addr: the random address whith should be setting
**                  p_set_rand_addr_cback: complete callback
** Returns          void
**
**
*******************************************************************************/
extern void BTA_DmSetRandAddress(BD_ADDR rand_addr, tBTA_SET_RAND_ADDR_CBACK *p_set_rand_addr_cback)
{
    tBTA_DM_APT_SET_DEV_ADDR *p_msg;
    APPL_TRACE_API("set the random address ");
    if ((p_msg = (tBTA_DM_APT_SET_DEV_ADDR *) osi_malloc(sizeof(tBTA_DM_APT_SET_DEV_ADDR))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_APT_SET_DEV_ADDR));
        memcpy(p_msg->address, rand_addr, BD_ADDR_LEN);
        p_msg->hdr.event = BTA_DM_API_SET_RAND_ADDR_EVT;
        p_msg->addr_type = BLE_ADDR_RANDOM;
        p_msg->p_set_rand_addr_cback = p_set_rand_addr_cback;
        //start sent the msg to the bta system control moudle
        bta_sys_sendmsg(p_msg);
    }
}

void BTA_DmClearRandAddress(void)
{
    tBTA_DM_APT_CLEAR_ADDR *p_msg;
    if ((p_msg = (tBTA_DM_APT_CLEAR_ADDR *) osi_malloc(sizeof(tBTA_DM_APT_CLEAR_ADDR))) != NULL) {
        memset(p_msg, 0, sizeof(tBTA_DM_APT_CLEAR_ADDR));
        p_msg->hdr.event = BTA_DM_API_CLEAR_RAND_ADDR_EVT;
        bta_sys_sendmsg(p_msg);
    }
}

/*******************************************************************************
**
** Function         BTA_VendorInit
**
** Description      This function initializes vendor specific
**
** Returns          void
**
*******************************************************************************/
void BTA_VendorInit (void)
{
    APPL_TRACE_API("BTA_VendorInit");
}

/*******************************************************************************
**
** Function         BTA_VendorCleanup
**
** Description      This function frees up Broadcom specific VS specific dynamic memory
**
** Returns          void
**
*******************************************************************************/
void BTA_VendorCleanup (void)
{
    tBTM_BLE_VSC_CB cmn_ble_vsc_cb;
    BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb);

#if (BLE_INCLUDED == TRUE && BLE_ANDROID_CONTROLLER_SCAN_FILTER == TRUE)
    btm_ble_adv_filter_cleanup();       // when BLE_VND_INCLUDED is false, this function will be ignore, so move it out of "if"

#if 0                                   //by TH, comment out temporarily
    if (cmn_ble_vsc_cb.max_filter > 0) {
        btm_ble_adv_filter_cleanup();
#if BLE_PRIVACY_SPT == TRUE
        btm_ble_resolving_list_cleanup ();
#endif
    }
#endif

    if (cmn_ble_vsc_cb.tot_scan_results_strg > 0) {
        btm_ble_batchscan_cleanup();
    }
#endif

    if (cmn_ble_vsc_cb.adv_inst_max > 0) {
        btm_ble_multi_adv_cleanup();
    }
}

#endif