esp-idf/tools/test_apps/.build-test-rules.yml

# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps

tools/test_apps/build_system/custom_partition_subtypes:
  enable:
    - if: IDF_TARGET in ["esp32", "linux"]
      reason: the test should be run on ESP32 and linux

tools/test_apps/build_system/embed_test:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c3"]
      temporary: false
      reason: Hardware independent feature, no need to test on all targets

tools/test_apps/linux_compatible/driver_mock:
  enable:
    - if: IDF_TARGET == "linux"

tools/test_apps/linux_compatible/linux_freertos:
  enable:
    - if: IDF_TARGET == "linux"

tools/test_apps/peripherals/i2c_wifi:
  disable:
    - if: SOC_I2C_SUPPORTED != 1 or SOC_WIFI_SUPPORTED != 1

tools/test_apps/phy/phy_multi_init_data_test:
  disable:
    - if: SOC_WIFI_SUPPORTED != 1

tools/test_apps/phy/phy_tsens:
  disable:
    - if: SOC_WIFI_SUPPORTED != 1 or SOC_TEMP_SENSOR_SUPPORTED != 1
  depends_components:
    - hal
    - driver
    - esp_phy
    - esp_hw_support
    - esp_wifi

tools/test_apps/protocols/esp_netif/build_config:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c2"]
      temporary: false
      reason: No need to test on all targets

tools/test_apps/protocols/mqtt/publish_connect_test:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c3", "esp32s2"]
      temporary: true
      reason: the other targets are not tested yet
  disable_test:
    - if: IDF_TARGET == "esp32s2" or IDF_TARGET == "esp32c3"
      temporary: true
      reason: lack of runners

tools/test_apps/protocols/netif_components:
  enable:
    - if: IDF_TARGET == "esp32"
      temporary: true
      reason: one target is enough to verify netif component dependencies

tools/test_apps/security/secure_boot:
  disable:
    - if: IDF_ENV_FPGA != 1
      reason: the test can only run on an FPGA as efuses need to be reset during the test.

tools/test_apps/security/signed_app_no_secure_boot:
  enable:
    - if: IDF_TARGET in ["esp32c2", "esp32c3"]
      temporary: true
      reason: No need to test on all targets

tools/test_apps/storage/partition_table_readonly:
  disable_test:
    - if: IDF_TARGET not in ["esp32", "esp32c3"]
      reason: these chips should be sufficient for test coverage (Xtensa and RISC-V, single and dual core)
  disable:
    - if: CONFIG_NAME == "encrypted"
      temporary: true
      reason: there are potential bugs with pytest when using flash encryption and NVS partition with nvs_create_partition_image #TODO: IDF-8300
  depends_components:
    - partition_table
    - spi_flash
    - esp_partition
    - nvs_flash
    - vfs
    - fatfs
    - spiffs

tools/test_apps/system/bootloader_sections:
  disable:
    - if: IDF_TARGET == "esp32c2"
      temporary: true
      reason: target esp32c2 is not supported yet

tools/test_apps/system/build_test:
  disable:
    # For ROM impl build tests, disable them if none of the tested features are supported in the ROM
    - if: CONFIG_NAME == "rom_impl_components" and ((ESP_ROM_HAS_HAL_WDT != 1  and ESP_ROM_HAS_HAL_SYSTIMER != 1) and (ESP_ROM_HAS_HEAP_TLSF != 1 and ESP_ROM_HAS_SPI_FLASH != 1))
    - if: CONFIG_NAME == "no_rom_impl_components" and ((ESP_ROM_HAS_HAL_WDT != 1 and ESP_ROM_HAS_HAL_SYSTIMER != 1) and (ESP_ROM_HAS_HEAP_TLSF != 1 and ESP_ROM_HAS_SPI_FLASH != 1))
    - if: CONFIG_NAME == "no_rvfplib" and ESP_ROM_HAS_RVFPLIB != 1
    - if: CONFIG_NAME == "usb_serial_jtag" AND SOC_USB_SERIAL_JTAG_SUPPORTED != 1
    - if: CONFIG_NAME == "usb_console_ets_printf" AND SOC_USB_OTG_SUPPORTED != 1
    - if: IDF_TARGET in ["esp32p4"]
      temporary: true
      reason: target(s) not supported yet #TODO: IDF-8119

tools/test_apps/system/cxx_no_except:
  enable:
    - if: IDF_TARGET == "esp32" or IDF_TARGET == "esp32c3"
      temporary: true
      reason: the other targets are not tested yet

tools/test_apps/system/cxx_pthread_bluetooth:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c2", "esp32c3", "esp32s2", "esp32s3"]
      temporary: true
      reason: the other targets are not supported yet

tools/test_apps/system/eh_frame:
  enable:
    - if: IDF_TARGET in ["esp32c2", "esp32c3"]
      temporary: true
      reason: the other targets are not tested yet

tools/test_apps/system/g0_components:
  enable:
    - if: INCLUDE_DEFAULT == 1 or IDF_TARGET in ["esp32p4"] # preview targets

tools/test_apps/system/g1_components:

tools/test_apps/system/gdb_loadable_elf:
  disable_test:
    - if: IDF_TARGET != "esp32"
      temporary: true
      reason: lack of runners
  disable:
    - if: IDF_TARGET == "esp32c6" or IDF_TARGET == "esp32h2"
      temporary: true
      reason: target esp32c6, esp32h2 is not supported yet

tools/test_apps/system/gdbstub_runtime:
  disable:
    - if: IDF_TARGET == "esp32p4"
      temporary: true
      reason: not supported yet #TODO: IDF-7510

tools/test_apps/system/longjmp_test:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32s2", "esp32s3"]
      temporary: true
      reason: the other targets are not tested yet
  disable_test:
    - if: IDF_TARGET == "esp32s3"
      temporary: true
      reason: lack of runners

tools/test_apps/system/memprot:
  enable:
    - if: IDF_TARGET in ["esp32c3", "esp32s2", "esp32s3"]
      temporary: true
      reason: the other targets are not tested yet

tools/test_apps/system/no_embedded_paths:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c3", "esp32s2"]
      temporary: true
      reason: the other targets are not tested yet

tools/test_apps/system/panic:
  disable:
    - if: IDF_TARGET in ["esp32p4"]
      temporary: true
      reason: target(s) not supported yet # TODO: IDF-7511

tools/test_apps/system/ram_loadable_app:
  disable:
    - if: IDF_TARGET == "esp32h2"
      temporary: true
      reason: lack of runners

tools/test_apps/system/startup:
  disable:
    - if: CONFIG_NAME == "main_task_cpu1" and IDF_TARGET not in ["esp32", "esp32s3"]

tools/test_apps/system/test_watchpoint:
  enable:
    - if: IDF_TARGET in ["esp32", "esp32c3"] # Just one test per architecture

tools/test_apps/system/unicore_bootloader:
  enable:
    - if: SOC_CPU_CORES_NUM > 1
      reason: the test should be run on multicore chips