esp-idf/components/xtensa/trax/test/README.txt

Instructions for running the test:

1. Connect an ESP32 board with JTAG adapter (WROVER-KIT, ETHERNET-KIT)
2. Set up the environment (this can be done by export.sh)
   - Add ESP32 toolchain to PATH, and check that GDB has been built with Python support
   - Add OpenOCD to PATH and set OPENOCD_SCRIPTS
   - Set IDF_PATH
3. Run `make flash test`. Check that "Test pass" is printed.
xtensa: add a script for parsing CPU traces (TRAX) 2020-02-20 20:27:42 -05:00			`Instructions for running the test:`

			`1. Connect an ESP32 board with JTAG adapter (WROVER-KIT, ETHERNET-KIT)`
			`2. Set up the environment (this can be done by export.sh)`
			`- Add ESP32 toolchain to PATH, and check that GDB has been built with Python support`
			`- Add OpenOCD to PATH and set OPENOCD_SCRIPTS`
			`- Set IDF_PATH`
			3. Run `make flash test`. Check that "Test pass" is printed.