esp-idf/examples/protocols/http_server/async_handlers/README.md

| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |

# Async Requests Handlers HTTPD Server Example

The Example demonstrates how to handle multiple long running simultaneous requests
within the HTTPD server. It has the following URIs:

    1. URI \long for demonstrating async requests running in the background
    2. URI \quick for demonstrating that quick requests are still responsive
    2. URI \ index page

## How to use example

### Hardware Required

* An ESP-Dev-Board (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
* A USB cable for power supply and programming

### Configure the project

```
idf.py menuconfig
```
* Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.

### Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

```
idf.py -p PORT flash monitor
```

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type ``Ctrl-]``.)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

## Example Output

```
I (14257) example_common: Connected to example_netif_sta
I (14267) example_common: - IPv4 address: 192.168.20.85,
I (14277) example_common: - IPv6 address: fe80:0000:0000:0000:7edf:a1ff:fea4:3454, type: ESP_IP6_ADDR_IS_LINK_LOCAL
I (14287) example: starting async req task worker
I (14287) example: starting async req task worker
I (14297) example: Starting server on port: '80'
I (14307) example: Registering URI handlers
I (14307) main_task: Returned from app_main()
I (15547) wifi:<ba-add>idx:1 (ifx:0, 68:d7:9a:81:26:1e), tid:0, ssn:0, winSize:64
I (19627) example: uri: /
I (25877) example: uri: /quick
I (33247) example: uri: /long
I (33247) example: invoking /long
I (33247) example: uri: /long
```
feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules Updated examples to be able to build for C5 and P4. Added Ethernet support for static_ip example. 2024-06-07 04:43:14 -04:00			`\| Supported Targets \| ESP32 \| ESP32-C2 \| ESP32-C3 \| ESP32-C5 \| ESP32-C6 \| ESP32-H2 \| ESP32-P4 \| ESP32-S2 \| ESP32-S3 \|`
			`\| ----------------- \| ----- \| -------- \| -------- \| -------- \| -------- \| -------- \| -------- \| -------- \| -------- \|`
feat(httpd): add support for asynchronous request handling This commit adds support for handling multiple requests simultaneously by introducing two new functions: `httpd_req_async_handler_begin()` and `httpd_req_async_handler_complete()`. These functions allow creating an asynchronous copy of a request that can be used on a separate thread and marking the asynchronous request as completed, respectively. Additionally, a new flag `for_async_req` has been added to the `httpd_sess_t` struct to indicate if a socket is being used for an asynchronous request and should not be purged from the LRU cache. An example have been added to demonstrate the usage of these new functions. Closes https://github.com/espressif/esp-idf/issues/10594 Signed-off-by: Harshit Malpani <harshit.malpani@espressif.com> 2023-04-13 20:05:10 -04:00
			`# Async Requests Handlers HTTPD Server Example`

			`The Example demonstrates how to handle multiple long running simultaneous requests`
			`within the HTTPD server. It has the following URIs:`

			`1. URI \long for demonstrating async requests running in the background`
			`2. URI \quick for demonstrating that quick requests are still responsive`
			`2. URI \ index page`

			`## How to use example`

			`### Hardware Required`

			`* An ESP-Dev-Board (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)`
			`* A USB cable for power supply and programming`

			`### Configure the project`

			```
			`idf.py menuconfig`
			```
			* Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.

			`### Build and Flash`

			`Build the project and flash it to the board, then run monitor tool to view serial output:`

			```
			`idf.py -p PORT flash monitor`
			```

			`(Replace PORT with the name of the serial port to use.)`

			(To exit the serial monitor, type ``Ctrl-]``.)

			`See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.`

			`## Example Output`

			```
			`I (14257) example_common: Connected to example_netif_sta`
			`I (14267) example_common: - IPv4 address: 192.168.20.85,`
			`I (14277) example_common: - IPv6 address: fe80:0000:0000:0000:7edf:a1ff:fea4:3454, type: ESP_IP6_ADDR_IS_LINK_LOCAL`
			`I (14287) example: starting async req task worker`
			`I (14287) example: starting async req task worker`
			`I (14297) example: Starting server on port: '80'`
			`I (14307) example: Registering URI handlers`
			`I (14307) main_task: Returned from app_main()`
			`I (15547) wifi:<ba-add>idx:1 (ifx:0, 68:d7:9a:81:26:1e), tid:0, ssn:0, winSize:64`
			`I (19627) example: uri: /`
			`I (25877) example: uri: /quick`
			`I (33247) example: uri: /long`
			`I (33247) example: invoking /long`
			`I (33247) example: uri: /long`
			```