esp-idf/components/bt/Kconfig

menuconfig BT_ENABLED
    bool "Bluetooth"
    help
        Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.

menuconfig BLUEDROID_ENABLED
	bool "Bluedroid Bluetooth stack enabled"
    depends on BT_ENABLED
	default y
	help
		This enables the default Bluedroid Bluetooth stack

config BTC_TASK_STACK_SIZE
    int "Bluetooth event (callback to application) task stack size"
    depends on BLUEDROID_ENABLED
    default 3072
    help
        This select btc task stack size

config BLUEDROID_MEM_DEBUG
    bool "Bluedroid memory debug"
    depends on BLUEDROID_ENABLED
    default n
    help
        Bluedroid memory debug

config CLASSIC_BT_ENABLED
    bool "Classic Bluetooth"
    depends on BLUEDROID_ENABLED
    default n
    help
        For now this option needs "SMP_ENABLE" to be set to yes

config BT_DRAM_RELEASE
    bool "Release DRAM from Classic BT controller"
    depends on BT_ENABLED && (!BLUEDROID_ENABLED || (BLUEDROID_ENABLED && !CLASSIC_BT_ENABLED))
    default n
    help
        This option should only be used when BLE only.
        Enabling this option will release about 30K DRAM from Classic BT.
        The released DRAM will be used as system heap memory.

config GATTS_ENABLE
    bool "Include GATT server module(GATTS)"
    depends on BLUEDROID_ENABLED
    default y 
    help
        This option can be disabled when the app work only on gatt client mode

config GATTC_ENABLE
    bool "Include GATT client module(GATTC)"
    depends on BLUEDROID_ENABLED
    default y
    help
        This option can be close when the app work only on gatt server mode

config BLE_SMP_ENABLE
   bool "Include BLE security module(SMP)"
   depends on BLUEDROID_ENABLED
   default y
   help
       This option can be close when the app not used the ble security connect.

config BT_STACK_NO_LOG
    bool "Close the bluedroid bt stack log print"
    depends on BLUEDROID_ENABLED
    default n
    help
        This select can save the rodata code size

config BT_ACL_CONNECTIONS
    int "BT/BLE MAX ACL CONNECTIONS(1~7)"
    depends on BLUEDROID_ENABLED
    range 1 7
    default 4
    help 
        Maximum BT/BLE connection count

#disable now for app cpu due to a known issue
config BTDM_CONTROLLER_RUN_APP_CPU
    bool "Run controller on APP CPU"
    depends on BT_ENABLED && !FREERTOS_UNICORE && 0
    default n
    help
        Run controller on APP CPU.

config BTDM_CONTROLLER_RUN_CPU
    int
    depends on BT_ENABLED
    default 1 if BTDM_CONTROLLER_RUN_APP_CPU
    default 0

menuconfig BT_HCI_UART
    bool "HCI use UART as IO"
    depends on BT_ENABLED && !BLUEDROID_ENABLED
    default n
    help
        Default HCI use VHCI, if this option choose, HCI will use UART(0/1/2) as IO.
        Besides, it can set uart number and uart baudrate.

config BT_HCI_UART_NO
    int "UART Number for HCI"
    depends on BT_HCI_UART
    range 1 2
    default 1
    help
        Uart number for HCI.

config BT_HCI_UART_BAUDRATE
    int "UART Baudrate for HCI"
    depends on BT_HCI_UART
    range 115200 921600
    default 921600
    help
        UART Baudrate for HCI. Please use standard baudrate.

config SMP_ENABLE
   bool
   depends on BLUEDROID_ENABLED
   default CLASSIC_BT_ENABLED || BLE_SMP_ENABLE
   
# Memory reserved at start of DRAM for Bluetooth stack
config BT_RESERVE_DRAM
    hex
    default 0x10000 if BT_ENABLED
    default 0
config: Move WiFi & BT toggles to Components menu, same as Ethernet 2017-01-10 00:39:43 -05:00			`menuconfig BT_ENABLED`
			`bool "Bluetooth"`
			`help`
component/bt: allow to use alternative Bluetooth stack by disabling Bluedroid Merges #408 https://github.com/espressif/esp-idf/pull/440 2017-03-07 12:20:33 -05:00			`Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.`

Merge branch 'master' into feature/btdm_avrc 2017-03-31 00:51:45 -04:00			`menuconfig BLUEDROID_ENABLED`
component/bt: allow to use alternative Bluetooth stack by disabling Bluedroid Merges #408 https://github.com/espressif/esp-idf/pull/440 2017-03-07 12:20:33 -05:00			`bool "Bluedroid Bluetooth stack enabled"`
			`depends on BT_ENABLED`
			`default y`
			`help`
			`This enables the default Bluedroid Bluetooth stack`
Initial public version 2016-08-17 11:08:22 -04:00
component/bt : change task to decease dram(heap) 1. decrease the task size(HCI cannot < 1024, btu cannot < 4096) 2. btc task can config by menuconfig(default 2048) 2016-11-25 10:37:46 -05:00			`config BTC_TASK_STACK_SIZE`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`int "Bluetooth event (callback to application) task stack size"`
Merge branch 'master' into feature/btdm_avrc 2017-03-31 00:51:45 -04:00			`depends on BLUEDROID_ENABLED`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`default 3072`
			`help`
			`This select btc task stack size`
component/bt : change task to decease dram(heap) 1. decrease the task size(HCI cannot < 1024, btu cannot < 4096) 2. btc task can config by menuconfig(default 2048) 2016-11-25 10:37:46 -05:00
component/bt : fix the bug of deinit/disable 1. fix the exception of deinit/disable 2. debug mem leak of deinit, fix some memleak, but still something wrong. 3. debug men leak of disable. 4. add bluedroid memory debug 2016-12-12 15:10:44 -05:00			`config BLUEDROID_MEM_DEBUG`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`bool "Bluedroid memory debug"`
Merge branch 'master' into feature/btdm_avrc 2017-03-31 00:51:45 -04:00			`depends on BLUEDROID_ENABLED`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`default n`
			`help`
			`Bluedroid memory debug`
component/bt : fix the bug of deinit/disable 1. fix the exception of deinit/disable 2. debug mem leak of deinit, fix some memleak, but still something wrong. 3. debug men leak of disable. 4. add bluedroid memory debug 2016-12-12 15:10:44 -05:00
component/bt: add Kconfig option "CLASSIC_BT_ENABLED" 2017-03-16 10:32:27 -04:00			`config CLASSIC_BT_ENABLED`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`bool "Classic Bluetooth"`
Merge branch 'master' into feature/btdm_avrc 2017-03-31 00:51:45 -04:00			`depends on BLUEDROID_ENABLED`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`default n`
component/bt: add constraint in Kconfig to enable SMP_ENABLE when using classic BT 1. For now, some security related functions used in classic Bluetooth are controlled by "SMP_ENABLE". This commit fixes the dependency. 2. The two options, "CLASSIC_BT_ENABLED" and "SMP_ENABLED" The two options will be decoupled in the future. 2017-06-15 03:48:20 -04:00			`help`
			`For now this option needs "SMP_ENABLE" to be set to yes`
component/bt: add Kconfig option "CLASSIC_BT_ENABLED" 2017-03-16 10:32:27 -04:00
component/bt : add option to release about 30K from BT if BLE only 1. later BT/BLE will be separated by BT/BLE macro, but this option should use when user make sure that in BLE only mode. 2017-02-21 04:46:59 -05:00			`config BT_DRAM_RELEASE`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`bool "Release DRAM from Classic BT controller"`
Merge branch 'master' into feature/btdm_avrc 2017-03-31 00:51:45 -04:00			`depends on BT_ENABLED && (!BLUEDROID_ENABLED \|\| (BLUEDROID_ENABLED && !CLASSIC_BT_ENABLED))`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`default n`
			`help`
			`This option should only be used when BLE only.`
component/bt: fix the dependence issue in Kconfig 2017-03-30 09:16:11 -04:00			`Enabling this option will release about 30K DRAM from Classic BT.`
component/bt: clean up the A2DP sink example 2017-03-18 04:02:54 -04:00			`The released DRAM will be used as system heap memory.`
component/bt : add option to release about 30K from BT if BLE only 1. later BT/BLE will be separated by BT/BLE macro, but this option should use when user make sure that in BLE only mode. 2017-02-21 04:46:59 -05:00
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`config GATTS_ENABLE`
component/bt:change the kconfig. 1.change the rowdata to rodata; 2.change BT_ACL_CONNECTIONS to Maximum BT/BLE connection count. 3. change the comments of bt_target.h:505 from 40 to 5. 2017-04-25 22:47:16 -04:00			`bool "Include GATT server module(GATTS)"`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`depends on BLUEDROID_ENABLED`
			`default y`
			`help`
component/bt:change the kconfig. 1.change the rowdata to rodata; 2.change BT_ACL_CONNECTIONS to Maximum BT/BLE connection count. 3. change the comments of bt_target.h:505 from 40 to 5. 2017-04-25 22:47:16 -04:00			`This option can be disabled when the app work only on gatt client mode`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00
			`config GATTC_ENABLE`
component/bt:change the kconfig. 1.change the rowdata to rodata; 2.change BT_ACL_CONNECTIONS to Maximum BT/BLE connection count. 3. change the comments of bt_target.h:505 from 40 to 5. 2017-04-25 22:47:16 -04:00			`bool "Include GATT client module(GATTC)"`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`depends on BLUEDROID_ENABLED`
			`default y`
			`help`
			`This option can be close when the app work only on gatt server mode`

component/bt: add constraint in Kconfig to enable SMP_ENABLE when using classic BT 1. For now, some security related functions used in classic Bluetooth are controlled by "SMP_ENABLE". This commit fixes the dependency. 2. The two options, "CLASSIC_BT_ENABLED" and "SMP_ENABLED" The two options will be decoupled in the future. 2017-06-15 03:48:20 -04:00			`config BLE_SMP_ENABLE`
			`bool "Include BLE security module(SMP)"`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`depends on BLUEDROID_ENABLED`
			`default y`
			`help`
			`This option can be close when the app not used the ble security connect.`

component/bt:Fixted the bug of HCI comment timeout error. 1. remove the SMP_INCLUDED == TRUE insite the btm_find_dev_by_handle function. 2. change the Kconfig with BT_ACL_CONNECTIONS 2017-04-26 04:23:45 -04:00			`config BT_STACK_NO_LOG`
			`bool "Close the bluedroid bt stack log print"`
			`depends on BLUEDROID_ENABLED`
			`default n`
			`help`
			`This select can save the rodata code size`

component/bt:Change the bt Kconfig BT_ACL_CONNECTIONS type from choice to int(range). 2017-04-26 05:27:21 -04:00			`config BT_ACL_CONNECTIONS`
			`int "BT/BLE MAX ACL CONNECTIONS(1~7)"`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`depends on BLUEDROID_ENABLED`
component/bt:Change the bt Kconfig BT_ACL_CONNECTIONS type from choice to int(range). 2017-04-26 05:27:21 -04:00			`range 1 7`
			`default 4`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00			`help`
component/bt:change the kconfig. 1.change the rowdata to rodata; 2.change BT_ACL_CONNECTIONS to Maximum BT/BLE connection count. 3. change the comments of bt_target.h:505 from 40 to 5. 2017-04-25 22:47:16 -04:00			`Maximum BT/BLE connection count`
component/bt:Finish all the separate code from BT & BLE 2017-04-20 07:18:05 -04:00
component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`#disable now for app cpu due to a known issue`
component/bt : support UART HCI and fix some bugs 1. support UART HCI, devolper need not to make a bridge between VHCI and UART. 2. fix bug of rand/srand called in ISR. 3. fix bug of BLE rx packets may cause assert. 2017-03-24 02:57:07 -04:00			`config BTDM_CONTROLLER_RUN_APP_CPU`
			`bool "Run controller on APP CPU"`
			`depends on BT_ENABLED && !FREERTOS_UNICORE && 0`
			`default n`
			`help`
			`Run controller on APP CPU.`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00
component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`config BTDM_CONTROLLER_RUN_CPU`
			`int`
			`depends on BT_ENABLED`
			`default 1 if BTDM_CONTROLLER_RUN_APP_CPU`
			`default 0`

			`menuconfig BT_HCI_UART`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`bool "HCI use UART as IO"`
component/bt: implement classic Bluetooth profiles A2DP(sink) and AVRCP(controller) 2017-04-10 04:12:21 -04:00			`depends on BT_ENABLED && !BLUEDROID_ENABLED`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`default n`
			`help`
			`Default HCI use VHCI, if this option choose, HCI will use UART(0/1/2) as IO.`
			`Besides, it can set uart number and uart baudrate.`

component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`config BT_HCI_UART_NO`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`int "UART Number for HCI"`
component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`depends on BT_HCI_UART`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`range 1 2`
			`default 1`
			`help`
			`Uart number for HCI.`

component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`config BT_HCI_UART_BAUDRATE`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`int "UART Baudrate for HCI"`
component/bt : modify bluetooth config style 2017-04-05 09:19:15 -04:00			`depends on BT_HCI_UART`
component/bt : add uart(1/2) as HCI IO directly 2017-03-16 05:14:20 -04:00			`range 115200 921600`
			`default 921600`
			`help`
			`UART Baudrate for HCI. Please use standard baudrate.`
component/bt : add option to release about 30K from BT if BLE only 1. later BT/BLE will be separated by BT/BLE macro, but this option should use when user make sure that in BLE only mode. 2017-02-21 04:46:59 -05:00
component/bt: add constraint in Kconfig to enable SMP_ENABLE when using classic BT 1. For now, some security related functions used in classic Bluetooth are controlled by "SMP_ENABLE". This commit fixes the dependency. 2. The two options, "CLASSIC_BT_ENABLED" and "SMP_ENABLED" The two options will be decoupled in the future. 2017-06-15 03:48:20 -04:00			`config SMP_ENABLE`
			`bool`
			`depends on BLUEDROID_ENABLED`
			`default CLASSIC_BT_ENABLED \|\| BLE_SMP_ENABLE`

esp32: Pass memory layout linker script through C preprocessor C preprocessor is a bit icky, but with ULP we will have 3 possible variables influencing the memory layout and 9 linker scripts is too many! 2016-09-20 21:04:16 -04:00			`# Memory reserved at start of DRAM for Bluetooth stack`
			`config BT_RESERVE_DRAM`
			`hex`
config: Simplify WiFi & Bluetooth config options Removes redundant menu options, splits WiFi configuration out from generic ESP32 configuration. 2017-01-10 00:04:04 -05:00			`default 0x10000 if BT_ENABLED`
Kconfig: use 4 spaces to instead 1 tab In some Kconfig file, both 4 spaces and 1 tab are used mix, let's just use 4 space, it will be clean in some editor. 2016-09-28 01:24:58 -04:00			`default 0`