esp-idf/components/esp_hw_support/include/clk_ctrl_os.h

78 lines
2.8 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
2022-12-01 07:48:27 -05:00
#include <stdbool.h>
2021-08-18 07:45:51 -04:00
#include "soc/soc_caps.h"
2021-12-02 07:24:19 -05:00
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
2022-12-01 07:48:27 -05:00
* @brief This function is used to enable the digital RC_FAST clock,
* to support the peripherals.
*
* @note If this function is called a number of times, the `periph_rtc_dig_clk8m_disable`
* function needs to be called same times to disable.
*
2022-12-01 07:48:27 -05:00
* @return true: success for enable the RC_FAST clock, false: RC_FAST clock enable failed
*/
bool periph_rtc_dig_clk8m_enable(void);
/**
2022-12-01 07:48:27 -05:00
* @brief This function is used to disable the digital RC_FAST clock, which should be called
* with the `periph_rtc_dig_clk8m_enable` pairedly
*
* @note If this function is called a number of times, the `periph_rtc_dig_clk8m_disable`
* function needs to be called same times to disable.
*/
void periph_rtc_dig_clk8m_disable(void);
/**
2022-12-01 07:48:27 -05:00
* @brief This function is used to get the real clock frequency value of RC_FAST clock
*
2022-12-01 07:48:27 -05:00
* @return The real clock value, in Hz
*/
uint32_t periph_rtc_dig_clk8m_get_freq(void);
2021-12-02 07:24:19 -05:00
#if SOC_CLK_APLL_SUPPORTED
/**
* @brief Enable APLL power if it has not enabled
*/
void periph_rtc_apll_acquire(void);
/**
* @brief Shut down APLL power if no peripherals using APLL
*/
void periph_rtc_apll_release(void);
/**
* @brief Calculate and set APLL coefficients by given frequency
* @note Have to call 'periph_rtc_apll_acquire' to enable APLL power before setting frequency
* @note This calculation is based on the inequality:
* xtal_freq * (4 + sdm2 + sdm1/256 + sdm0/65536) >= SOC_APLL_MULTIPLIER_OUT_MIN_HZ(350 MHz)
* It will always calculate the minimum coefficients that can satisfy the inequality above, instead of loop them one by one.
* which means more appropriate coefficients are likely to exist.
* But this algorithm can meet almost all the cases and the accuracy can be guaranteed as well.
* @note The APLL frequency is only allowed to set when there is only one peripheral refer to it.
* If APLL is already set by another peripheral, this function will return `ESP_ERR_INVALID_STATE`
* and output the current frequency by parameter `real_freq`.
*
* @param expt_freq Expected APLL frequency (unit: Hz)
* @param real_freq APLL real working frequency [output] (unit: Hz)
* @return
* - ESP_OK: APLL frequency set success
* - ESP_ERR_INVALID_ARG: The input expt_freq is out of APLL support range
* - ESP_ERR_INVALID_STATE: APLL is refered by more than one peripherals, not allowed to change its frequency now
*/
esp_err_t periph_rtc_apll_freq_set(uint32_t expt_freq, uint32_t *real_freq);
#endif // SOC_CLK_APLL_SUPPORTED
#ifdef __cplusplus
}
#endif