esp-idf/components/bootloader/subproject/main/component.mk

#
# Main bootloader Makefile.
#
# This is basically the same as a component makefile, but in the case of the bootloader
# we pull in bootloader-specific linker arguments.
#

LINKER_SCRIPTS := \
	esp32.bootloader.ld \
	$(IDF_PATH)/components/esp32/ld/esp32.rom.ld \
	$(IDF_PATH)/components/esp32/ld/esp32.rom.spiram_incompatible_fns.ld \
	$(IDF_PATH)/components/esp32/ld/esp32.peripherals.ld \
	esp32.bootloader.rom.ld

ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
LINKER_SCRIPTS += $(IDF_PATH)/components/esp32/ld/esp32.rom.spiflash.ld
endif

COMPONENT_ADD_LDFLAGS += -L $(COMPONENT_PATH) $(addprefix -T ,$(LINKER_SCRIPTS))

COMPONENT_ADD_LINKER_DEPS := $(LINKER_SCRIPTS)
Initial public version 2016-08-17 11:08:22 -04:00			`#`
build system: Refactor component.mk to not need component_common.mk New makefile component_wrapper.mk allows some variables to be set before component.mk is evaluated. This properly fixes problems with sdkconfig being hard to access in all phases of the build. Including component_common.mk is no longer necessary and will print a deprecation warning for components which use it. 2016-11-09 21:20:55 -05:00			`# Main bootloader Makefile.`
Initial public version 2016-08-17 11:08:22 -04:00			`#`
build system: Refactor component.mk to not need component_common.mk New makefile component_wrapper.mk allows some variables to be set before component.mk is evaluated. This properly fixes problems with sdkconfig being hard to access in all phases of the build. Including component_common.mk is no longer necessary and will print a deprecation warning for components which use it. 2016-11-09 21:20:55 -05:00			`# This is basically the same as a component makefile, but in the case of the bootloader`
			`# we pull in bootloader-specific linker arguments.`
Initial public version 2016-08-17 11:08:22 -04:00			`#`

bootloader: export ets_update_cpu_frequency 2017-01-08 14:08:24 -05:00			`LINKER_SCRIPTS := \`
			`esp32.bootloader.ld \`
			`$(IDF_PATH)/components/esp32/ld/esp32.rom.ld \`
Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-07-20 04:26:35 -04:00			`$(IDF_PATH)/components/esp32/ld/esp32.rom.spiram_incompatible_fns.ld \`
Bootloader: Support switching to Quad I/O mode during boot process 2017-01-29 22:29:50 -05:00			`$(IDF_PATH)/components/esp32/ld/esp32.peripherals.ld \`
bootloader: export ets_update_cpu_frequency 2017-01-08 14:08:24 -05:00			`esp32.bootloader.rom.ld`
Initial public version 2016-08-17 11:08:22 -04:00
spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip 1) fixed SPI_read_status: added check for flash busy flag in matrix mode 2) fixed SPI_page_program: enable write before writing data to SPI FIFO 3) SPI flash ROM funcs replacement is controlled via menuconfig option 2017-03-09 02:29:00 -05:00			`ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH`
			`LINKER_SCRIPTS += $(IDF_PATH)/components/esp32/ld/esp32.rom.spiflash.ld`
			`endif`

build system: Use component.mk for all components, refactor bootloader build For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1" Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader project works, it's now mostly independent from the parent. 2017-06-23 00:08:01 -04:00			`COMPONENT_ADD_LDFLAGS += -L $(COMPONENT_PATH) $(addprefix -T ,$(LINKER_SCRIPTS))`
build system: Project ELF should depend on linker scripts, binary libraries TW#7816 2016-12-11 23:54:30 -05:00
			`COMPONENT_ADD_LINKER_DEPS := $(LINKER_SCRIPTS)`