esp-idf/components/idf_test/integration_test/IT_BTSTK_COEXIST.yml

test cases:
- ID: BTSTK_COEXIST_0101
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE advertise co-exist with WIFI
  summary: BLE advertise co-exist with wifi scan
  steps: '1. DUT2 BLE do advertise in range (0x20 - 0x40)
    2. DUT2 do wifi scan and DUT1 do BLE scan
    3. DUT2 BLE do advertise in range (0x400 - 0x800)
    4. DUT2 do wifi scan and DUT1 do BLE scan'
  expected result: '1. succeed
    2. external AP in wifi scan result,  and DUT2 in BLE scan result
    3. succeed
    4. external AP in wifi scan result,  and DUT2 in BLE scan result'
  initial condition: BLE_INIT2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC2 bleadv -D -z stop"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0 -i 0x20-0x40"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 op -S -o 1"
    - ["R SSC2 C +MODE:OK"]
  - - "SSC SSC1 blescan -L -c 0"
    - ["R SSC1 C +BLESCAN:SetScanParam,OK"]
  - - "SSC SSC1 blescan -D -z start -t 2"
    - [""]
  - - "SSC SSC2 sta -S"
    - ["P SSC2 P <ap_ssid>", "P SSC1 P <dut2_bt_mac> C Complete"]
  - - "SSC SSC2 bleadv -D -z stop"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0 -i 0x400-0x800"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC1 blescan -D -z start -t 2"
    - [""]
  - - "SSC SSC2 sta -S"
    - ["P SSC2 P <ap_ssid>", "P SSC1 P <dut2_bt_mac>"]
- ID: BTSTK_COEXIST_0102
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE advertise co-exist with WIFI
  summary: BLE advertise co-exist with wifi join AP
  steps: '1. DUT2 BLE do advertise in range (0x20 - 0x40)
    2. DUT2 do wifi JAP and DUT1 do BLE scan
    3. DUT2 BLE do advertise in range (0x400 - 0x800)
    4. DUT2 do wifi JAP and DUT1 do BLE scan'
  expected result: '1. succeed
    2. JAP succeed,  and DUT2 in BLE scan result
    3. succeed
    4. JAP succeed,  and DUT2 in BLE scan result'
  initial condition: BLE_INIT2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 op -S -o 1"
    - ["R SSC2 C +MODE:OK"]
  - - "SSC SSC1 blescan -L -c 0"
    - ["R SSC1 C +BLESCAN:SetScanParam,OK"]
  - - "SSC SSC2 sta -C -s <ap_ssid> -p <ap_password>"
    - [""]
  - - "SSC SSC1 blescan -D -z start -t 5"
    - ["P SSC2 C +JAP:CONNECTED", "P SSC1 P <dut2_bt_mac> C Complete"]
  - - "SSC SSC2 bleadv -D -z stop"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0 -i 0x400-0x800"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 sta -C -s <ap_ssid> -p <ap_password>"
    - [""]
  - - "SSC SSC1 blescan -D -z start -t 5"
    - ["P SSC2 C +JAP:CONNECTED", "P SSC1 P <dut2_bt_mac> C Complete"]
- ID: BTSTK_COEXIST_0103
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE advertise co-exist with WIFI
  summary: BLE advertise co-exist with wifi connected with AP
  steps: '1. DUT2 BLE do advertise in range (0x20 - 0x40)
    2. DUT2 do wifi JAP
    3. DUT1 do BLE scan
    4. DUT2 BLE do advertise in range (0x400 - 0x800)
    5. DUT2 do wifi JAP
    6. DUT1 do BLE scan'
  expected result: '1. succeed
    2. JAP succeed
    3. STA not disconnected with AP and DUT2 in BLE scan result
    4. succeed
    5. JAP succeed
    6. STA not disconnected with AP and DUT2 in BLE scan result'
  initial condition: BLE_INIT2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC2 bleadv -L -c 0 -t 3"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 op -S -o 1"
    - ["R SSC2 C +MODE:OK"]
  - - "SSC SSC1 blescan -L -c 0"
    - ["R SSC1 C +BLESCAN:SetScanParam,OK"]
  - - "SSC SSC2 sta -C -s <ap_ssid> -p <ap_password>"
    - ["P SSC2 C +JAP:CONNECTED"]
  - - "SSC SSC1 blescan -D -z start -t 10"
    - ["P SSC2 NC DISCONNECT", "P SSC1 P <dut2_bt_mac> C Complete"]
  - - "SSC SSC2 bleadv -D -z stop"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 bleadv -D -z start -c 0 -i 0x400-0x800"
    - ["R SSC2 C +BLEADV:OK"]
  - - "SSC SSC2 sta -C -s <ap_ssid> -p <ap_password>"
    - ["P SSC2 C +JAP:CONNECTED"]
  - - "SSC SSC1 blescan -D -z start -t 10"
    - ["P SSC2 NC DISCONNECT", "P SSC1 P <dut2_bt_mac> C Complete"]
- ID: BTSTK_COEXIST_0201
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE send recv co-exist with WIFI
  summary: BLE send recv co-exist with wifi scan
  steps: '1. DUT1 BLE read long with interval 50 ms
    2. DUT1 do wifi scan
    3. DUT1 BLE read long with interval 5 ms
    4. DUT1 do wifi scan'
  expected result: '1. succeed
    2. external AP in wifi scan result, read succeed
    3. succeed
    4. external AP in wifi scan result, read succeed'
  initial condition: BLE_CONN2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC1 gattc -D -z primaryService -p 0x10"
    - ["R SSC1 C +GATTC:Discover,OK"]
  - - "SSC SSC1 op -S -o 1"
    - ["R SSC1 C +MODE:OK"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20 -j 50"
    - ["P SSC1 C +GATTC:OK"]
  - - "SSC SSC1 sta -S"
    - ["P SSC1 P <ap_ssid>", "P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20 -j 5"
    - ["P SSC1 C +GATTC:OK"]
  - - "SSC SSC1 sta -S"
    - ["P SSC1 P <ap_ssid>", "P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
- ID: BTSTK_COEXIST_0202
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE send recv co-exist with WIFI
  summary: BLE send recv co-exist with wifi join AP
  steps: '1. DUT1 BLE read long with interval 50 ms
    2. DUT1 do wifi JAP
    3. DUT1 BLE read long with interval 5 ms
    4. DUT1 do wifi JAP'
  expected result: '1. succeed
    2. JAP succeed, read succeed
    3. succeed
    4. JAP succeed, read succeed'
  initial condition: BLE_CONN2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC1 gattc -D -z primaryService -p 0x10"
    - ["R SSC1 C +GATTC:Discover,OK"]
  - - "SSC SSC1 op -S -o 1"
    - ["R SSC1 C +MODE:OK"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20"
    - ["P SSC1 C +GATTC:OK"]
  - - "SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>"
    - ["P SSC1 C +JAP:CONNECTED", "P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20"
    - ["P SSC1 C +GATTC:OK"]
  - - "SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>"
    - ["P SSC1 C +JAP:CONNECTED", "P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
- ID: BTSTK_COEXIST_0203
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE send recv co-exist with WIFI
  summary: BLE send recv co-exist with wifi join AP
  steps: '1. DUT1 do wifi JAP
    2. DUT1 BLE read long with interval 50 ms
    3. DUT1 do wifi JAP
    4. DUT1 BLE read long with interval 5 ms'
  expected result: '1. succeed
    2. JAP succeed, read succeed
    3. succeed
    4. JAP succeed, read succeed'
  initial condition: BLE_CONN2
  test environment: SSC_T2_1
  execution time: 0
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC1 gattc -D -z primaryService -p 0x10"
    - ["R SSC1 C +GATTC:Discover,OK"]
  - - "SSC SSC1 op -S -o 1"
    - ["R SSC1 C +MODE:OK"]
  - - "SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>"
    - ["P SSC1 C +JAP:CONNECTED", ""]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20"
    - ["P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20"
    - ["P SSC1 C +GATTC:Read,OK,0010,A000,C101"]
- ID: BTSTK_COEXIST_0301
  SDK: ESP32_IDF
  Test App: SSC_BLE
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  test point 2: BLE co-exist with WIFI on all channels
  summary: BLE co-exist with wifi when join AP on different channels
  steps: '1. DUT1 set to AP mode, DUT2 set to STA mode, config AP on a specific channel
    2. DUT1 starts read long char
    3. DUT2 join DUT1 soft AP
    4. Loop step 1-3 for all 13 channels'
  expected result: '1. succeed
    2. succeed
    3. succeed
    4. succeed'
  initial condition: BLE_CONN2
  test environment: SSC_T2_1
  execution time: 0.3
  module: BT Stack
  sub module: Coexist
  version: v1 (2016-12-31)
  CI ready: 'Yes'
  level: Integration
  allow fail: ''
  cmd set:
  - ""
  - - "SSC SSC1 gattc -D -z primaryService -p 0x10"
    - ["R SSC1 C +GATTC:Discover,OK"]
  - - "SSC SSC[1-2] op -S -o [2,1]"
    - ["P SSC[1-2] C +MODE:OK"]
  - - 'LOOP 13 3 "range(1,14)"'
    - [""]
  - - "SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n {%d}"
    - ["P SSC1 C +SAP:OK"]
  - - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101 -n 20"
    - [""]
  - - "SSC SSC2 sta -C -s <target_ssid> -c <target_password>"
    - ["P SSC1 C +GATTC:Read,OK,0010,A000,C101", "P SSC2 C +JAP:CONNECTED"]