esp-idf/examples/peripherals/i2s/i2s_basic/i2s_pdm/main/Kconfig.projbuild

47 lines
1.8 KiB
Plaintext
Raw Normal View History

menu "I2S PDM Example Configuration"
choice EXAMPLE_PDM_DIR
prompt "I2S PDM direction"
default EXAMPLE_PDM_TX
help
Select example PDM direction
config EXAMPLE_PDM_TX
bool "PDM TX"
2022-11-14 03:28:00 -05:00
depends on SOC_I2S_SUPPORTS_PDM_TX
help
PDM TX example will play 'twinkle twinkle little star' in three tones.
config EXAMPLE_PDM_RX
bool "PDM RX"
2022-11-14 03:28:00 -05:00
depends on SOC_I2S_SUPPORTS_PDM_RX
help
PDM RX example will show the received data from a PDM microphone.
endchoice
choice EXAMPLE_PDM_TX_LINE_MODE
prompt "I2S PDM TX Line Mode"
depends on EXAMPLE_PDM_TX && SOC_I2S_HW_VERSION_2
default EXAMPLE_PDM_TX_CODEC
help
Decide to output PDM signal into a PDM codec or a low-pass filter
config EXAMPLE_PDM_TX_CODEC
bool "Codec line mode"
help
Output PDM signal to a PDM codec. The PDM clock signal is mandatory for PDM codec,
the codec can differentiate the left and right sound channels by sampling data
on positive or negative edges. That means the data of the left and right channels
can coexist on a same data line.
config EXAMPLE_PDM_TX_DAC
bool "DAC line mode"
help
Output PDM signal to a low-pass filter, so that the low-pass filter can restore the PDM
signal to analog wave. Therefore, each data line can only contains one sound channel,
if both left and right channels are required, two data lines should be specified as well.
Normally the PDM signal is not sufficient in DAC line mode.
endchoice
endmenu