esp-idf/components/driver/CMakeLists.txt

idf_build_get_property(target IDF_TARGET)

set(srcs
    "gpio.c"
    "i2c.c"
    "i2s.c"
    "ledc.c"
    "pcnt.c"
    "periph_ctrl.c"
    "rmt.c"
    "rtc_io.c"
    "rtc_module.c"
    "sdspi_crc.c"
    "sdspi_host.c"
    "sdspi_transaction.c"
    "sigmadelta.c"
    "spi_common.c"
    "spi_master.c"
    "spi_slave.c"
    "spi_bus_lock.c"
    "timer.c"
    "twai.c"
    "uart.c")

set(includes "include" "${target}/include")

if(${target} STREQUAL "esp32")
    # SDMMC and MCPWM are in ESP32 only.
    list(APPEND srcs "adc_common.c"
                     "dac_common.c"
                     "mcpwm.c"
                     "sdio_slave.c"
                     "sdmmc_host.c"
                     "sdmmc_transaction.c"
                     "touch_sensor_common.c"
                     "esp32/touch_sensor.c"
                     "esp32/adc.c"
                     "esp32/dac.c")
    list(APPEND includes "esp32/include")
endif()

if(IDF_TARGET STREQUAL "esp32s2")
    list(APPEND srcs "adc_common.c"
                     "dac_common.c"
                     "dedic_gpio.c"
                     "spi_slave_hd.c"
                     "touch_sensor_common.c"
                     "esp32s2/rtc_tempsensor.c"
                     "esp32s2/touch_sensor.c"
                     "esp32s2/adc.c"
                     "esp32s2/adc2_init_cal.c"
                     "esp32s2/dac.c")
    list(APPEND includes "esp32s2/include")
endif()

if(${target} STREQUAL "esp32s3")
    list(APPEND srcs "adc_common.c"
                     "dac_common.c"
                     "dedic_gpio.c"
                     "gdma.c"
                     "spi_slave_hd.c"
                     "touch_sensor_common.c"
                    )
endif()

if(IDF_TARGET STREQUAL "esp32c3")
    list(APPEND srcs "gdma.c"
                     "spi_slave_hd.c"
                     "adc_common.c"
                     "usb_serial_jtag.c"
                     "esp32c3/adc.c"
                     "esp32c3/adc2_init_cal.c"
                     "esp32c3/rtc_tempsensor.c")
endif()

idf_component_register(SRCS "${srcs}"
                    INCLUDE_DIRS ${includes}
                    PRIV_INCLUDE_DIRS "include/driver"
                    PRIV_REQUIRES efuse esp_pm esp_timer esp_ipc
                    REQUIRES esp_ringbuf freertos soc hal esp_hw_support
                    LDFRAGMENTS linker.lf)
# (REQUIRES cannot hide soc headers, since many arguments in the driver headers are chip-dependent)

# uses C11 atomic feature
set_source_files_properties(spi_master.c PROPERTIES COMPILE_FLAGS -std=gnu11)
bringup esp32-s3 on FPGA 2020-07-29 01:13:51 -04:00			`idf_build_get_property(target IDF_TARGET)`

global: rename esp32s2beta to esp32s2 2020-01-16 22:47:08 -05:00			`set(srcs`
components: use new component registration api 2019-04-28 03:38:23 -04:00			`"gpio.c"`
			`"i2c.c"`
			`"i2s.c"`
			`"ledc.c"`
			`"pcnt.c"`
			`"periph_ctrl.c"`
			`"rmt.c"`
rtcio: add hal for driver 2019-07-25 11:11:31 -04:00			`"rtc_io.c"`
components: use new component registration api 2019-04-28 03:38:23 -04:00			`"rtc_module.c"`
			`"sdspi_crc.c"`
			`"sdspi_host.c"`
			`"sdspi_transaction.c"`
			`"sigmadelta.c"`
			`"spi_common.c"`
			`"spi_master.c"`
			`"spi_slave.c"`
spi: allow using esp_flash and spi_master driver on the same bus 2019-10-24 07:00:26 -04:00			`"spi_bus_lock.c"`
components: use new component registration api 2019-04-28 03:38:23 -04:00			`"timer.c"`
TWAI: bringup for S3 and C3 2021-01-13 21:44:59 -05:00			`"twai.c"`
components: use new component registration api 2019-04-28 03:38:23 -04:00			`"uart.c")`
esp32s2beta: convert some todos to warnings 2019-06-12 03:53:57 -04:00
adc: fix some regression issues 2021-01-18 08:59:18 -05:00			`set(includes "include" "${target}/include")`
Merge branch 'master' into feature/esp32s2beta_update 2019-08-16 05:06:34 -04:00
bringup esp32-s3 on FPGA 2020-07-29 01:13:51 -04:00			`if(${target} STREQUAL "esp32")`
Update I2S driver for esp32s2beta. 2019-06-06 05:00:03 -04:00			`# SDMMC and MCPWM are in ESP32 only.`
driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`list(APPEND srcs "adc_common.c"`
			`"dac_common.c"`
			`"mcpwm.c"`
Merge branch 'master' into feature/esp32s2beta_update 2019-08-07 23:44:24 -04:00			`"sdio_slave.c"`
			`"sdmmc_host.c"`
Refactor the touch sensor driver 2019-11-27 07:08:44 -05:00			`"sdmmc_transaction.c"`
driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`"touch_sensor_common.c"`
driver(adc/dac): fix adc dac driver for esp32s2 1. update register file about adc; 2. fix adc driver; 3. add UT for adc/dac; See merge request espressif/esp-idf!7776 2020-02-25 09:19:48 -05:00			`"esp32/touch_sensor.c"`
dfiver(dac): add dac dma driver and unit test 2020-04-08 09:56:14 -04:00			`"esp32/adc.c"`
			`"esp32/dac.c")`
Refactor the touch sensor driver 2019-11-27 07:08:44 -05:00			`list(APPEND includes "esp32/include")`
esp32s2beta: convert some todos to warnings 2019-06-12 03:53:57 -04:00			`endif()`

driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`if(IDF_TARGET STREQUAL "esp32s2")`
			`list(APPEND srcs "adc_common.c"`
			`"dac_common.c"`
			`"dedic_gpio.c"`
			`"spi_slave_hd.c"`
			`"touch_sensor_common.c"`
			`"esp32s2/rtc_tempsensor.c"`
driver(adc/dac): fix adc dac driver for esp32s2 1. update register file about adc; 2. fix adc driver; 3. add UT for adc/dac; See merge request espressif/esp-idf!7776 2020-02-25 09:19:48 -05:00			`"esp32s2/touch_sensor.c"`
driver(adc): add adc initial code before app_main for esp32s2. update phy v301 2020-04-01 23:20:38 -04:00			`"esp32s2/adc.c"`
spi_slave_hd: new driver for spi slave in half duplex mode 2020-04-29 04:20:40 -04:00			`"esp32s2/adc2_init_cal.c"`
dfiver(dac): add dac dma driver and unit test 2020-04-08 09:56:14 -04:00			`"esp32s2/dac.c")`
global: rename esp32s2beta to esp32s2 2020-01-16 22:47:08 -05:00			`list(APPEND includes "esp32s2/include")`
add Comment for touchpad 2019-06-20 04:13:47 -04:00			`endif()`

spi: esp32s3 bringup for spi 2020-09-08 05:05:49 -04:00			`if(${target} STREQUAL "esp32s3")`
driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`list(APPEND srcs "adc_common.c"`
			`"dac_common.c"`
			`"dedic_gpio.c"`
gdma: dynamic alloc DMA channels 2020-12-09 07:29:26 -05:00			`"gdma.c"`
driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`"spi_slave_hd.c"`
			`"touch_sensor_common.c"`
spi: esp32s3 bringup for spi 2020-09-08 05:05:49 -04:00			`)`
			`endif()`

driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`if(IDF_TARGET STREQUAL "esp32c3")`
gdma: dynamic alloc DMA channels 2020-12-09 07:29:26 -05:00			`list(APPEND srcs "gdma.c"`
			`"spi_slave_hd.c"`
adc: fixed the issue that ADC power is left on after the calibration is done Also refactor the locks in the adc_common.c file. 2021-01-31 12:12:28 -05:00			`"adc_common.c"`
usb_serial_jtag: Add blocking driver to support vfs. 2021-04-23 03:46:02 -04:00			`"usb_serial_jtag.c"`
system: reset dma when soft reset 2020-12-22 23:29:57 -05:00			`"esp32c3/adc.c"`
driver: esp32c3 rtc_tempsensor compile fixes 2021-01-12 18:45:57 -05:00			`"esp32c3/adc2_init_cal.c"`
			`"esp32c3/rtc_tempsensor.c")`
driver: Add esp32c3 drivers (except ADC/DAC) and update tests Some ESP32-C3 drivers are still pending. Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305 2020-12-16 04:03:48 -05:00			`endif()`

components: use new component registration api 2019-04-28 03:38:23 -04:00			`idf_component_register(SRCS "${srcs}"`
Merge branch 'master' into feature/esp32s2beta_update 2019-08-16 05:06:34 -04:00			`INCLUDE_DIRS ${includes}`
components: use new component registration api 2019-04-28 03:38:23 -04:00			`PRIV_INCLUDE_DIRS "include/driver"`
esp32, esp32s2: create esp_pm component 2020-07-21 05:15:19 -04:00			`PRIV_REQUIRES efuse esp_pm esp_timer esp_ipc`
TWAI: FIFO overrun handling and errata workarounds This commit adds handling for FIFO overruns and adds workarounds for HW errats on the ESP32. Closes https://github.com/espressif/esp-idf/issues/2519 Closes https://github.com/espressif/esp-idf/issues/4276 2021-03-24 22:24:37 -04:00			`REQUIRES esp_ringbuf freertos soc hal esp_hw_support`
			`LDFRAGMENTS linker.lf)`
cmake: Apply cmakelint fixes 2020-11-10 01:51:08 -05:00			`# (REQUIRES cannot hide soc headers, since many arguments in the driver headers are chip-dependent)`
spi_master: compile as C11 due to use of stdatomic.h stdatomic.h is available both in newlib and GCC include directories. Normally (if you invoke the compiler without any flags) GCC include directories are first on the list, so GCC’s stdatomic.h is used. In IDF, we used to pass newlib include path as an extra include directory, so newlib’s stdint.h got included instead. Newlib 2.2.0 stdatomic implementation is compatible with -std=gnu99 but incompatible with -std=gnu11. And GCC doesn’t support atomic_load with -std=gnu99 (it’s a C11 feature). So when we used atomic_load with -std=gnu99, it worked due to newlib’s header. Since we are no longer going to be including newlib headers into IDF, GCC stdatomic will be used instead. Hence, add -std=gnu11 for source files which use atomic features. 2019-03-08 01:57:00 -05:00
global: remove gcc 5.2 support 2019-11-05 06:20:26 -05:00			`# uses C11 atomic feature`
			`set_source_files_properties(spi_master.c PROPERTIES COMPILE_FLAGS -std=gnu11)`