mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
214 lines
8.2 KiB
ReStructuredText
214 lines
8.2 KiB
ReStructuredText
|
===================
|
||
|
|
ESP32-C3-DevKitC-02
|
||
|
|
===================
|
||
|
|
|
||
|
|
:link_to_translation:`zh_CN:[中文]`
|
||
|
|
|
||
|
|
This user guide will help you get started with ESP32-C3-DevKitC-02 and will also provide more in-depth information.
|
||
|
|
|
||
|
|
ESP32-C3-DevKitC-02 is an entry-level development board based on `ESP32-C3-WROOM-02 <https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf>`_, a general-purpose module with 4 MB SPI flash. This board integrates complete Wi-Fi and Bluetooth LE functions.
|
||
|
|
|
||
|
|
Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitC-02 on a breadboard.
|
||
|
|
|
||
|
|
.. figure:: ../../../_static/esp32-c3-devkitc-02-v1-isometric.png
|
||
|
|
:align: center
|
||
|
|
:alt: ESP32-C3-DevKitC-02
|
||
|
|
:figclass: align-center
|
||
|
|
|
||
|
|
ESP32-C3-DevKitC-02
|
||
|
|
|
||
|
|
The document consists of the following major sections:
|
||
|
|
|
||
|
|
- `Getting Started`_: Overview of ESP32-C3-DevKitC-02 and hardware/software setup instructions to get started.
|
||
|
|
- `Hardware Reference`_: More detailed information about the ESP32-C3-DevKitC-02's hardware.
|
||
|
|
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of ESP32-C3-DevKitC-02.
|
||
|
|
- `Related Documents`_: Links to related documentation.
|
||
|
|
|
||
|
|
Getting Started
|
||
|
|
===============
|
||
|
|
|
||
|
|
This section provides a brief introduction of ESP32-C3-DevKitC-02, instructions on how to do the initial hardware setup and how to flash firmware onto it.
|
||
|
|
|
||
|
|
Description of Components
|
||
|
|
-------------------------
|
||
|
|
|
||
|
|
.. _user-guide-c3-devkitc-02-v1-board-front:
|
||
|
|
|
||
|
|
.. figure:: ../../../_static/esp32-c3-devkitc-02-v1-annotated-photo.png
|
||
|
|
:align: center
|
||
|
|
:alt: ESP32-C3-DevKitC-02 - front
|
||
|
|
:figclass: align-center
|
||
|
|
|
||
|
|
ESP32-C3-DevKitC-02 - front
|
||
|
|
|
||
|
|
.. list-table::
|
||
|
|
:widths: 30 70
|
||
|
|
:header-rows: 1
|
||
|
|
|
||
|
|
* - Key Component
|
||
|
|
- Description
|
||
|
|
* - ESP32-C3-WROOM-02
|
||
|
|
- ESP32-C3-WROOM-02 from Espressif is a powerful and general-purpose module that offers Wi-Fi and Bluetooth LE coexistence. It has a PCB antenna and a 4 MB SPI flash.
|
||
|
|
* - 5 V to 3.3 V LDO
|
||
|
|
- Power regulator that converts a 5 V supply into a 3.3 V output.
|
||
|
|
* - 5 V Power On LED
|
||
|
|
- Turns on when the USB power is connected to the board.
|
||
|
|
* - I/O Connector
|
||
|
|
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board. For details, please see :ref:`user-guide-c3-devkitc-02-v1-header-blocks`.
|
||
|
|
* - Boot Button
|
||
|
|
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||
|
|
* - Micro-USB Port
|
||
|
|
- USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-C3 chip.
|
||
|
|
* - Reset Button
|
||
|
|
- Press this button to restart the system.
|
||
|
|
* - USB-to-UART Bridge
|
||
|
|
- Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
|
||
|
|
* - RGB LED
|
||
|
|
- Addressable RGB LED, driven by GPIO8.
|
||
|
|
|
||
|
|
|
||
|
|
Start Application Development
|
||
|
|
-----------------------------
|
||
|
|
|
||
|
|
Before powering up your ESP32-C3-DevKitC-02, please make sure that it is in good condition with no obvious signs of damage.
|
||
|
|
|
||
|
|
Required Hardware
|
||
|
|
^^^^^^^^^^^^^^^^^
|
||
|
|
|
||
|
|
- ESP32-C3-DevKitC-02
|
||
|
|
- USB 2.0 cable (Standard-A to Micro-B)
|
||
|
|
- Computer running Windows, Linux, or macOS
|
||
|
|
|
||
|
|
.. note::
|
||
|
|
|
||
|
|
Be sure to use a good quality USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
||
|
|
|
||
|
|
Software Setup
|
||
|
|
^^^^^^^^^^^^^^
|
||
|
|
|
||
|
|
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example into your ESP32-C3-DevKitC-02.
|
||
|
|
|
||
|
|
Contents and Packaging
|
||
|
|
----------------------
|
||
|
|
|
||
|
|
Retail orders
|
||
|
|
^^^^^^^^^^^^^
|
||
|
|
|
||
|
|
If you order a few samples, each ESP32-C3-DevKitC-02 comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||
|
|
|
||
|
|
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||
|
|
|
||
|
|
|
||
|
|
Wholesale Orders
|
||
|
|
^^^^^^^^^^^^^^^^
|
||
|
|
|
||
|
|
If you order in bulk, the boards come in large cardboard boxes.
|
||
|
|
|
||
|
|
For wholesale orders, please check `Espressif Product Ordering Information <https://www.espressif.com/sites/default/files/documentation/espressif_products_ordering_information_en.pdf>`_ (PDF)
|
||
|
|
|
||
|
|
Hardware Reference
|
||
|
|
==================
|
||
|
|
|
||
|
|
Block Diagram
|
||
|
|
-------------
|
||
|
|
|
||
|
|
The block diagram below shows the components of ESP32-C3-DevKitC-02 and their interconnections.
|
||
|
|
|
||
|
|
.. figure:: ../../../_static/esp32-c3-devkitc-02-v1-block-diags.png
|
||
|
|
:align: center
|
||
|
|
:scale: 70%
|
||
|
|
:alt: ESP32-C3-DevKitC-02 (click to enlarge)
|
||
|
|
:figclass: align-center
|
||
|
|
|
||
|
|
ESP32-C3-DevKitC-02 (click to enlarge)
|
||
|
|
|
||
|
|
Power Supply Options
|
||
|
|
^^^^^^^^^^^^^^^^^^^^
|
||
|
|
|
||
|
|
There are three mutually exclusive ways to provide power to the board:
|
||
|
|
|
||
|
|
- Micro USB port, default power supply
|
||
|
|
- 5V and GND header pins
|
||
|
|
- 3V3 and GND header pins
|
||
|
|
|
||
|
|
It is recommended to use the first option: micro USB port.
|
||
|
|
|
||
|
|
.. _user-guide-c3-devkitc-02-v1-header-blocks:
|
||
|
|
|
||
|
|
Header Block
|
||
|
|
------------
|
||
|
|
|
||
|
|
The two tables below provide the **Name** and **Function** of I/O header pins on both sides of the board, as shown in :ref:`user-guide-c3-devkitc-02-v1-board-front`. The numbering and names are the same as in the `ESP32-C3-DevKitC-02 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-C3-DEVKITC-02_V1_1_20210126A.pdf>`_ (PDF).
|
||
|
|
|
||
|
|
J1
|
||
|
|
^^^
|
||
|
|
=== ==== ========== ===================================
|
||
|
|
No. Name Type [#]_ Function
|
||
|
|
=== ==== ========== ===================================
|
||
|
|
1 G G Ground
|
||
|
|
2 3V3 P 3.3 V power supply
|
||
|
|
3 3V3 P 3.3 V power supply
|
||
|
|
4 RST I CHIP_PU
|
||
|
|
5 G G Ground
|
||
|
|
6 4 I/O/T GPIO4, ADC1_CH4, FSPIHD, MTMS
|
||
|
|
7 5 I/O/T GPIO5, ADC2_CH0, FSPIWP, MTDI
|
||
|
|
8 6 I/O/T GPIO6, FSPICLK, MTCK
|
||
|
|
9 7 I/O/T GPIO7, FSPID, MTDO
|
||
|
|
10 G G Ground
|
||
|
|
11 8 I/O/T GPIO8 [#]_
|
||
|
|
12 9 I/O/T GPIO9
|
||
|
|
13 5V P 5 V power supply
|
||
|
|
14 5V P 5 V power supply
|
||
|
|
15 G G Ground
|
||
|
|
=== ==== ========== ===================================
|
||
|
|
|
||
|
|
J3
|
||
|
|
^^^
|
||
|
|
=== ==== ===== ====================================
|
||
|
|
No. Name Type Function
|
||
|
|
=== ==== ===== ====================================
|
||
|
|
1 G G Ground
|
||
|
|
2 0 I/O/T GPIO0, ADC1_CH0, XTAL_32K_P
|
||
|
|
3 1 I/O/T GPIO1, ADC1_CH1, XTAL_32K_N
|
||
|
|
4 2 I/O/T GPIO2, ADC1_CH2, FSPIQ
|
||
|
|
5 3 I/O/T GPIO3, ADC1_CH3
|
||
|
|
6 G G Ground
|
||
|
|
7 10 I/O/T GPIO10, FSPICS0
|
||
|
|
8 G G Ground
|
||
|
|
9 RX I/O/T GPIO20, U0RXD
|
||
|
|
10 TX I/O/T GPIO21, U0TXD
|
||
|
|
11 G G Ground
|
||
|
|
12 18 I/O/T GPIO18
|
||
|
|
13 19 I/O/T GPIO19
|
||
|
|
14 G G Ground
|
||
|
|
15 G G Ground
|
||
|
|
=== ==== ===== ====================================
|
||
|
|
|
||
|
|
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
|
||
|
|
.. [#] Used to drive the RGB LED.
|
||
|
|
|
||
|
|
Pin Layout
|
||
|
|
^^^^^^^^^^^
|
||
|
|
.. figure:: ../../../_static/esp32-c3-devkitc-02-v1-pinout.png
|
||
|
|
:align: center
|
||
|
|
:alt: ESP32-C3-DevKitC-02
|
||
|
|
:figclass: align-center
|
||
|
|
|
||
|
|
ESP32-C3-DevKitC-02 Pin Layout
|
||
|
|
|
||
|
|
Hardware Revision Details
|
||
|
|
=========================
|
||
|
|
|
||
|
|
No previous versions available.
|
||
|
|
|
||
|
|
Related Documents
|
||
|
|
=================
|
||
|
|
* `ESP32-C3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf>`_ (PDF)
|
||
|
|
* `ESP32-C3-WROOM-02 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-c3-wroom-02_datasheet_en.pdf>`_ (PDF)
|
||
|
|
* `ESP32-C3-DevKitC-02 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-C3-DEVKITC-02_V1_1_20210126A.pdf>`_ (PDF)
|
||
|
|
* `ESP32-C3-DevKitC-02 PCB Layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-C3-DevKitC-02_V1_1_20210121AA.pdf>`_ (PDF)
|
||
|
|
* `ESP32-C3-DevKitC-02 Dimensions <https://dl.espressif.com/dl/schematics/DXF_ESP32-C3-DevKitC-02_V1_1_20210121AA.pdf>`_ (PDF)
|
||
|
|
* `ESP32-C3-DevKitC-02 Dimensions source file <https://dl.espressif.com/dl/schematics/DXF_ESP32-C3-DevKitC-02_V1_1_20210121AA.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
||
|
|
|
||
|
|
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|