esp-idf/docs/en/get-started/linux-setup-scratch.rst

75 lines
2.3 KiB
ReStructuredText
Raw Normal View History

2017-03-26 18:01:52 -04:00
**********************************
Setup Linux Toolchain from Scratch
**********************************
.. note::
Standard process for installing the toolchain is described :doc:`here <linux-setup>`. See :ref:`Customized Setup of Toolchain <get-started-customized-setup>` section for some of the reasons why installing the toolchain from scratch may be necessary.
2017-03-26 18:01:52 -04:00
Install Prerequisites
=====================
To compile with ESP-IDF you need to get the following packages:
- Ubuntu and Debian::
sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
2017-03-26 18:01:52 -04:00
- Arch::
sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
.. note::
Some older (pre-2014) Linux distributions may use ``pyserial`` version 2.x which is not supported by ESP-IDF.
In this case please install a supported version via ``pip`` as it is described in section
:ref:`get-started-get-packages`.
2017-03-26 18:01:52 -04:00
Compile the Toolchain from Source
=================================
- Install dependencies:
- CentOS 7::
sudo yum install gawk gperf grep gettext ncurses-devel python python-devel automake bison flex texinfo help2man libtool
- Ubuntu pre-16.04::
sudo apt-get install gawk gperf grep gettext libncurses-dev python python-dev automake bison flex texinfo help2man libtool
- Ubuntu 16.04::
sudo apt-get install gawk gperf grep gettext python python-dev automake bison flex texinfo help2man libtool libtool-bin
- Debian 9::
2017-03-26 18:01:52 -04:00
sudo apt-get install gawk gperf grep gettext libncurses-dev python python-dev automake bison flex texinfo help2man libtool libtool-bin
2017-03-26 18:01:52 -04:00
- Arch::
TODO
Create the working directory and go into it::
mkdir -p ~/esp
cd ~/esp
Download ``crosstool-NG`` and build it:
2017-03-26 18:01:52 -04:00
.. include:: /_build/inc/scratch-build-code.inc
2017-03-26 18:01:52 -04:00
Build the toolchain::
./ct-ng xtensa-esp32-elf
./ct-ng build
chmod -R u+w builds/xtensa-esp32-elf
Toolchain will be built in ``~/esp/crosstool-NG/builds/xtensa-esp32-elf``. Follow :ref:`instructions for standard setup <setup-linux-toolchain-add-it-to-path>` to add the toolchain to your ``PATH``.
Next Steps
==========
To carry on with development environment setup, proceed to section :ref:`get-started-get-esp-idf`.