esp-idf/docs/en/api-reference/system/esp_event.rst

Event Loop Library
==================

Overview
--------

The event loop library allows components to declare events to which other components can register handlers -- code which will
execute when those events occur. This allows loosely coupled components to attach desired behavior to changes in state of other components
without application involvement. For instance, a high level connection handling library may subscribe to events produced
by the wifi subsystem directly and act on those events. This also simplifies event processing by serializing and deferring
code execution to another context.

Using ``esp_event`` APIs
------------------------

There are two objects of concern for users of this library: events and event loops. 

Events are occurences of note. For example, for WiFi, a successful connection to the access point may be an event. 
Events are referenced using a two part identifier which are discussed more :ref:`here <esp-event-declaring-defining-events>`. 
Event loops are the vehicle by which events get posted by event sources and handled by event handler functions. 
These two appear prominently in the event loop library APIs.

Using this library roughly entails the following flow:

1. A user defines a function that should run when an event is posted to a loop. This function is referred to  as the event handler. It should have the same signature as :cpp:type:`esp_event_handler_t`.
2. An event loop is created using :cpp:func:`esp_event_loop_create`, which outputs a handle to the loop of type :cpp:type:`esp_event_loop_handle_t`. Event loops created using this API are referred to as user event loops. There is, however, a special type of event loop called the default event loop which are discussed :ref:`here <esp-event-default-loops>`.
3. Components register event handlers to the loop using :cpp:func:`esp_event_handler_register_with`. Handlers can be registered with multiple loops, more on that :ref:`here <esp-event-handler-registration>`.
4. Event sources post an event to the loop using :cpp:func:`esp_event_post_to`.
5. Components wanting to remove their handlers from being called can do so by unregistering from the loop using :cpp:func:`esp_event_handler_unregister_with`.
6. Event loops which are no longer needed can be deleted using :cpp:func:`esp_event_loop_delete`.

In code, the flow above may look like as follows:

.. code-block:: c

    // 1. Define the event handler
    void run_on_event(void* handler_arg, esp_event_base_t base, int32_t id, void* event_data)
    {
        // Event handler logic
    }

    void app_main()
    {
        // 2. A configuration structure of type esp_event_loop_args_t is needed to specify the properties of the loop to be 
        // created. A handle of type esp_event_loop_handle_t is obtained, which is needed by the other APIs to reference the loop
        // to perform their operations on.
        esp_event_loop_args_t loop_args = {
            .queue_size = ...,
            .task_name = ...
            .task_priority = ...,
            .task_stack_size = ...,
            .task_core_id = ...
        };

        esp_event_loop_handle_t loop_handle;

        esp_event_loop_create(&loop_args, &loop_handle)

        // 3. Register event handler defined in (1). MY_EVENT_BASE and MY_EVENT_ID specifies a hypothetical 
        // event that handler run_on_event should execute on when it gets posted to the loop. 
        esp_event_handler_register_with(loop_handle, MY_EVENT_BASE, MY_EVENT_ID, run_on_event, ...);

        ...

        // 4. Post events to the loop. This queues the event on the event loop. At some point in time
        // the event loop executes the event handler registered to the posted event, in this case run_on_event.
        // For simplicity sake this example calls esp_event_post_to from app_main, but posting can be done from
        // any other tasks (which is the more interesting use case).
        esp_event_post_to(loop_handle, MY_EVENT_BASE, MY_EVENT_ID, ...);

        ...

        // 5. Unregistering an unneeded handler
        esp_event_handler_unregister_with(loop_handle, MY_EVENT_BASE, MY_EVENT_ID, run_on_event);

        ...

        // 6. Deleting an unneeded event loop
        esp_event_loop_delete(loop_handle);
    }

.. _esp-event-declaring-defining-events:

Declaring and defining events
-----------------------------

As mentioned previously, events consists of two-part identifers: the event base and the event ID. The event base identifies an independent group
of events; the event ID identifies the event within that group. Think of the event base and event ID as a
person's last name and first name, respectively. A last name identifies a family, and the first name identifies a person within that family.

The event loop library provides macros to declare and define the event base easily.

Event base declaration:

.. code-block:: c

    ESP_EVENT_DECLARE_BASE(EVENT_BASE)

Event base definition:

.. code-block:: c

    ESP_EVENT_DEFINE_BASE(EVENT_BASE)

.. note::

    In IDF, the base identifiers for system events are uppercase and are postfixed with ``_EVENT``. For example, the base for wifi events is declared and defined
    as ``WIFI_EVENT``, the ethernet event base ``ETHERNET_EVENT``, and so on. The purpose is to have event bases look like constants (although
    they are global variables considering the defintions of macros ``ESP_EVENT_DECLARE_BASE`` and ``ESP_EVENT_DEFINE_BASE``).

For event ID's, declaring them as enumerations is recommended. Once again, for visibility, these are typically placed in public header files.

Event ID:

.. code-block:: c

    enum {
        EVENT_ID_1,
        EVENT_ID_2,
        EVENT_ID_3,
        ...
    }

.. _esp-event-default-loops:

Default Event Loop
------------------

The default event loop is a special type of loop used for system events (WiFi events, for example). The handle for this
loop is hidden from the user. The creation, deletion, handler registration/unregistration and posting of events is done 
through a variant of the APIs for user event loops. The table below enumerates those variants, and the user event 
loops equivalent.

+---------------------------------------------------+---------------------------------------------------+ 
| User Event Loops                                  | Default Event Loops                               | 
+===================================================+===================================================+ 
| :cpp:func:`esp_event_loop_create`                 | :cpp:func:`esp_event_loop_create_default`         |  
+---------------------------------------------------+---------------------------------------------------+ 
| :cpp:func:`esp_event_loop_delete`                 | :cpp:func:`esp_event_loop_delete_default`         | 
+---------------------------------------------------+---------------------------------------------------+ 
| :cpp:func:`esp_event_handler_register_with`       | :cpp:func:`esp_event_handler_register`            | 
+---------------------------------------------------+---------------------------------------------------+ 
| :cpp:func:`esp_event_handler_unregister_with`     | :cpp:func:`esp_event_handler_unregister`          | 
+---------------------------------------------------+---------------------------------------------------+ 
| :cpp:func:`esp_event_post_to`                     | :cpp:func:`esp_event_post`                        |    
+---------------------------------------------------+---------------------------------------------------+ 

If you compare the signatures for both, they are mostly similar except the for the lack of loop handle
specification for the default event loop APIs. 

Other than the API difference and the special designation to which system events are posted to, there is no difference
to how default event loops and user event loops behave. It is even possible for users to post their own events 
to the default event loop, should the user opt to not create their own loops to save memory.

.. _esp-event-handler-registration:

Notes on Handler Registration
-----------------------------

It is possible to register a single handler to multiple events individually, i.e. using multiple calls to :cpp:func:`esp_event_handler_register_with`.
For those multiple calls, the specific event base and event ID can be specified with which the handler should execute.

However, in some cases it is desirable for a handler to execute on (1) all events that get posted to a loop or (2) all events
of a particular base identifier. This is possible using the special event base identifier ``ESP_EVENT_ANY_BASE`` and
special event ID ``ESP_EVENT_ANY_ID``. These special identifiers may be passed as the event base and event ID arguments
for :cpp:func:`esp_event_handler_register_with`.

Therefore, the valid arguments to :cpp:func:`esp_event_handler_register_with` are:

1. <event base>, <event ID> - handler executes when the event with base <event base> and event ID <event ID> gets posted to the loop
2. <event base>, ESP_EVENT_ANY_ID - handler executes when any event with base <event base> gets posted to the loop
3. ESP_EVENT_ANY_BASE, ESP_EVENT_ANY_ID - handler executes when any event gets posted to the loop

As an example, suppose the following handler registrations were performed:

.. code-block:: c

    esp_event_handler_register_with(loop_handle, MY_EVENT_BASE, MY_EVENT_ID, run_on_event_1, ...);
    esp_event_handler_register_with(loop_handle, MY_EVENT_BASE, ESP_EVENT_ANY_ID, run_on_event_2, ...);
    esp_event_handler_register_with(loop_handle, ESP_EVENT_ANY_BASE, ESP_EVENT_ANY_ID, run_on_event_3, ...);

If the hypothetical event ``MY_EVENT_BASE``, ``MY_EVENT_ID`` is posted, all three handlers ``run_on_event_1``, ``run_on_event_2``,
and ``run_on_event_3`` would execute.

If the hypothetical event ``MY_EVENT_BASE``, ``MY_OTHER_EVENT_ID`` is posted, only  ``run_on_event_2`` and ``run_on_event_3`` would execute.

If the hypothetical event ``MY_OTHER_EVENT_BASE``, ``MY_OTHER_EVENT_ID`` is posted, only ``run_on_event_3`` would execute.

Event loop profiling
--------------------

A configuration option :envvar:`CONFIG_EVENT_LOOP_PROFILING` can be enabled in order to activate statistics collection for all event loops created.
The function :cpp:func:`esp_event_dump` can be used to output the collected statistics to a file stream. More details on the information included in the dump
can be found in the :cpp:func:`esp_event_dump` API Reference.

Application Example
-------------------

Examples on using the ``esp_event`` library can be found on :example:`system/esp_event`. The examples cover event declaration, loop creation, handler registration
and unregistration and event posting.

API Reference
-------------

.. include:: /_build/inc/esp_event.inc
.. include:: /_build/inc/esp_event_base.inc