esp-idf/examples/system/perfmon/README.md

366 lines
18 KiB
Markdown
Raw Normal View History

# Performance Monitor (`perfmon`) example
(See the README.md file in the upper level 'examples' directory for more information about examples.)
## Overview
This example illustrates usage of `perfmon` APIs to monitor and profile functions.
The example will calculate performance statistic for simple test function.
The simple test function could be exchanged to one from the user.
The example contain test function that will be executed with perfmon component and collect CPU statistic. The test function will be executed 200 times in each test case. The first test case collect statistic from all available performance counters, and second test just from defined in the list.
## How to use example
### Hardware Required
Example should be able to run on any commonly available ESP32 development board.
### Configure the project
```
make menuconfig
```
* Set serial port under Serial Flasher Options.
### Build and Flash
Enter `make -j4 flash monitor` if you are using GNU Make based build system or enter `idf.py build flash monitor` if you' are using CMake based build system.
(To exit the serial monitor, type ``Ctrl-]``.)
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
## Example Output
1. Example starts and call first test. The first test call test function 'exec_test_function'
```bash
I (288) example: Start
I (288) example: Start test with printing all available statistic
Value = 750, select = 0, mask = 0001. Counts cycles.
Amount of cycles
Value = 0, select = 1, mask = 0001. Overflow of counter.
Overflow counter
Value = 0, select = 2, mask = 0001. Successfully Retired Instructions.
JX instructions
Value = 0, select = 2, mask = 0002. Successfully Retired Instructions.
CALLXn instructions
Value = 3, select = 2, mask = 0004. Successfully Retired Instructions.
return instructions (RET, RETW, ...)
Value = 0, select = 2, mask = 0008. Successfully Retired Instructions.
supervisor return instructions (RFDE, RFE, RFI, RFWO, RFWU)
Value = 100, select = 2, mask = 0010. Successfully Retired Instructions.
Conditional branch instructions where execution
transfers to the target (aka. taken branch),
or loopgtz/loopnez instr where execution skips
the loop (aka. not-taken loop)
Value = 0, select = 2, mask = 0020. Successfully Retired Instructions.
J instr
Value = 1, select = 2, mask = 0040. Successfully Retired Instructions.
CALLn instr
Value = 0, select = 2, mask = 0080. Successfully Retired Instructions.
Conditional branch instr where execution
falls through (aka. not-taken branch)
Value = 0, select = 2, mask = 0100. Successfully Retired Instructions.
Loop instr where execution falls into loop (aka. taken loop)
Value = 0, select = 2, mask = 0400. Successfully Retired Instructions.
Last inst of loop and execution transfers
to LBEG (aka. loopback taken)
Value = 0, select = 2, mask = 0800. Successfully Retired Instructions.
Last inst of loop and execution falls
through to LEND (aka. loopback fallthrough)
Value = 309, select = 2, mask = 8000. Successfully Retired Instructions.
Non-branch instr (aka. non-CTI)
Value = 0, select = 3, mask = 0002. Data-related GlobalStall cycles.
Store buffer full stall
Value = 0, select = 3, mask = 0004. Data-related GlobalStall cycles.
Store buffer conflict stall
Value = 0, select = 3, mask = 0008. Data-related GlobalStall cycles.
Data Cache-miss stall (unused)
Value = 0, select = 3, mask = 0010. Data-related GlobalStall cycles.
Data RAM/ROM/XLMI busy stall
Value = 0, select = 3, mask = 0020. Data-related GlobalStall cycles.
Data inbound-PIF request stall (includes s32c1i)
Value = 0, select = 3, mask = 0040. Data-related GlobalStall cycles.
MHT lookup stall
Value = 0, select = 3, mask = 0080. Data-related GlobalStall cycles.
Uncached load stall (included in MHT lookup stall below)
Value = 0, select = 3, mask = 0100. Data-related GlobalStall cycles.
Bank-conflict stall
Value = 0, select = 4, mask = 0001. Instruction-related and Other Glob
alStall cycles.
ICache-miss stall
Value = 0, select = 4, mask = 0002. Instruction-related and Other Glob
alStall cycles.
Instruction RAM/ROM busy stall
Value = 0, select = 4, mask = 0004. Instruction-related and Other Glob
alStall cycles.
Instruction RAM inbound-PIF request stall
Value = 0, select = 4, mask = 0008. Instruction-related and Other Glob
alStall cycles.
TIE port stall
Value = 0, select = 4, mask = 0010. Instruction-related and Other Glob
alStall cycles.
External RunStall signal status
Value = 0, select = 4, mask = 0020. Instruction-related and Other Glob
alStall cycles.
Uncached fetch stall
Value = 1, select = 4, mask = 0040. Instruction-related and Other Glob
alStall cycles.
FastL32R stall
Value = 0, select = 4, mask = 0080. Instruction-related and Other Glob
alStall cycles.
Iterative multiply stall
Value = 0, select = 4, mask = 0100. Instruction-related and Other Glob
alStall cycles.
Iterative divide stall
Value = 0, select = 5, mask = 0001. Exceptions and Pipeline Replays.
Other Pipeline Replay (i.e. excludes cache miss etc.)
Value = 0, select = 5, mask = 0002. Exceptions and Pipeline Replays.
Level-1 interrupt
Value = 0, select = 5, mask = 0004. Exceptions and Pipeline Replays.
Greater-than-level-1 interrupt
Value = 0, select = 5, mask = 0008. Exceptions and Pipeline Replays.
Debug exception
Value = 0, select = 5, mask = 0010. Exceptions and Pipeline Replays.
NMI
Value = 0, select = 5, mask = 0020. Exceptions and Pipeline Replays.
Window exception
Value = 0, select = 5, mask = 0040. Exceptions and Pipeline Replays.
Allocate exception
Value = 0, select = 5, mask = 0080. Exceptions and Pipeline Replays.
Other exceptions
Value = 0, select = 5, mask = 0100. Exceptions and Pipeline Replays.
HW-corrected memory error
Value = 0, select = 6, mask = 0001. Hold and Other Bubble cycles.
Processor domain PSO bubble
Value = 0, select = 6, mask = 0004. Hold and Other Bubble cycles.
R hold caused by Data Cache miss(unused)
Value = 0, select = 6, mask = 0008. Hold and Other Bubble cycles.
R hold caused by Store release
Value = 0, select = 6, mask = 0010. Hold and Other Bubble cycles.
R hold caused by register dependency
Value = 0, select = 6, mask = 0020. Hold and Other Bubble cycles.
R hold caused by MEMW, EXTW or EXCW
Value = 0, select = 6, mask = 0040. Hold and Other Bubble cycles.
R hold caused by Halt instruction (TX only)
Value = 322, select = 6, mask = 0080. Hold and Other Bubble cycles.
CTI bubble (e.g. branch delay slot)
Value = 0, select = 6, mask = 0100. Hold and Other Bubble cycles.
WAITI bubble i.e. a cycle spent in WaitI power down mode.
Value = 417, select = 7, mask = 0001. Instruction TLB Accesses (per inst
ruction retiring).
ITLB Hit
Value = 0, select = 7, mask = 0002. Instruction TLB Accesses (per inst
ruction retiring).
Replay of instruction due to ITLB miss
Value = 0, select = 7, mask = 0004. Instruction TLB Accesses (per inst
ruction retiring).
HW-assisted TLB Refill completes
Value = 0, select = 7, mask = 0008. Instruction TLB Accesses (per inst
ruction retiring).
ITLB Miss Exception
Value = 0, select = 8, mask = 0001. Instruction Memory Accesses (per i
nstruction retiring).
Instruction Cache Hit
Value = 0, select = 8, mask = 0002. Instruction Memory Accesses (per i
nstruction retiring).
Instruction Cache Miss
Value = 420, select = 8, mask = 0004. Instruction Memory Accesses (per i
nstruction retiring).
All InstRAM or InstROM accesses
Value = 0, select = 8, mask = 0008. Instruction Memory Accesses (per i
nstruction retiring).
Bypass (i.e. uncached) fetch
Value = 3, select = 9, mask = 0001. Data TLB Accesses.
DTLB Hit
Value = 0, select = 9, mask = 0002. Data TLB Accesses.
Replay of load/store due to DTLB miss
Value = 0, select = 9, mask = 0004. Data TLB Accesses.
HW-assisted TLB Refill completes
Value = 0, select = 9, mask = 0008. Data TLB Accesses.
DTLB Miss Exception
Value = 0, select = 10, mask = 0001. Load Instruction (Data Memory).
Data Cache Hit(unused)
Value = 0, select = 10, mask = 0002. Load Instruction (Data Memory).
Data Cache Miss(unused)
Value = 3, select = 10, mask = 0004. Load Instruction (Data Memory).
Load from local memory i.e. DataRAM, DataROM, InstRAM, InstROM
Value = 0, select = 10, mask = 0008. Load Instruction (Data Memory).
Bypass (i.e. uncached) load
Value = 0, select = 13, mask = 0001. Load Instruction (Data Memory).
Data Cache Hit(unused)
Value = 0, select = 13, mask = 0002. Load Instruction (Data Memory).
Data Cache Miss(unused)
Value = 0, select = 13, mask = 0004. Load Instruction (Data Memory).
Load from local memory i.e. DataRAM, DataROM, InstRAM, InstROM
Value = 0, select = 13, mask = 0008. Load Instruction (Data Memory).
Bypass (i.e. uncached) load
Value = 0, select = 16, mask = 0001. Load Instruction (Data Memory).
Data Cache Hit (unused)
Value = 0, select = 16, mask = 0002. Load Instruction (Data Memory).
Data Cache Miss (unused)
Value = 0, select = 16, mask = 0004. Load Instruction (Data Memory).
Load from local memory i.e. DataRAM, DataROM, InstRAM, InstROM
Value = 0, select = 16, mask = 0008. Load Instruction (Data Memory).
Bypass (i.e. uncached) load
Value = 0, select = 11, mask = 0001. Store Instruction (Data Memory).
Data Cache Hit (unused)
Value = 0, select = 11, mask = 0002. Store Instruction (Data Memory).
Data Cache Miss (unused)
Value = 0, select = 11, mask = 0004. Store Instruction (Data Memory).
Store to local memory i.e. DataRAM, InstRAM
Value = 0, select = 11, mask = 0008. Store Instruction (Data Memory).
PIF Store
Value = 0, select = 14, mask = 0001. Store Instruction (Data Memory).
Data Cache Hit(unused)
Value = 0, select = 14, mask = 0002. Store Instruction (Data Memory).
Data Cache Miss(unused)
Value = 0, select = 14, mask = 0004. Store Instruction (Data Memory).
Store to local memory i.e. DataRAM, InstRAM
Value = 0, select = 14, mask = 0008. Store Instruction (Data Memory).
PIF Store
Value = 0, select = 17, mask = 0001. Store Instruction (Data Memory).
Data Cache Hit (unused)
Value = 0, select = 17, mask = 0002. Store Instruction (Data Memory).
Data Cache Miss (unused)
Value = 0, select = 17, mask = 0004. Store Instruction (Data Memory).
Store to local memory i.e. DataRAM, InstRAM
Value = 0, select = 17, mask = 0008. Store Instruction (Data Memory).
PIF Store
Value = 0, select = 12, mask = 0001. Accesses to Data Memory (Load, Sto
re, S32C1I, ...).
Cache Miss
Value = 0, select = 15, mask = 0001. Accesses to Data Memory (Load, Sto
re, S32C1I, ...).
Cache Miss
Value = 0, select = 18, mask = 0001. Accesses to Data Memory (Load, Sto
re, S32C1I, ...).
Cache Miss
Value = 415, select = 22, mask = 0001. Multiple Load/Store.
0 stores and 0 loads
Value = 3, select = 22, mask = 0002. Multiple Load/Store.
0 stores and 1 loads
Value = 0, select = 22, mask = 0004. Multiple Load/Store.
1 stores and 0 loads
Value = 0, select = 22, mask = 0008. Multiple Load/Store.
1 stores and 1 loads
Value = 0, select = 22, mask = 0010. Multiple Load/Store.
0 stores and 2 loads
Value = 0, select = 22, mask = 0020. Multiple Load/Store.
2 stores and 0 loads
Value = 0, select = 23, mask = 0001. Outbound PIF.
Castout
Value = 0, select = 23, mask = 0002. Outbound PIF.
Prefetch
Value = 0, select = 24, mask = 0001. Inbound PIF.
Data DMA
Value = 0, select = 24, mask = 0002. Inbound PIF.
Instruction DMA
Value = 0, select = 26, mask = 0001. Prefetch.
I prefetch-buffer-lookup hit
Value = 0, select = 26, mask = 0002. Prefetch.
D prefetch-buffer-lookup hit
Value = 0, select = 26, mask = 0004. Prefetch.
I prefetch-buffer-lookup miss
Value = 0, select = 26, mask = 0008. Prefetch.
D prefetch-buffer-lookup miss
Value = 0, select = 26, mask = 0020. Prefetch.
Direct fill to (L1) Data Cache (unused)
Value = 0, select = 27, mask = 0001. iDMA.
active cycles
Value = 0, select = 28, mask = 0001. Length of Instructions.
16-bit
Value = 0, select = 28, mask = 0002. Length of Instructions.
24-bit
Value = 0, select = 28, mask = 0004. Length of Instructions.
32-bit
Value = 0, select = 28, mask = 0008. Length of Instructions.
40-bit
Value = 0, select = 28, mask = 0010. Length of Instructions.
48-bit
Value = 0, select = 28, mask = 0020. Length of Instructions.
56-bit
Value = 0, select = 28, mask = 0040. Length of Instructions.
64-bit
Value = 0, select = 28, mask = 0080. Length of Instructions.
72-bit
Value = 0, select = 28, mask = 0100. Length of Instructions.
80-bit
Value = 0, select = 28, mask = 0200. Length of Instructions.
88-bit
Value = 0, select = 28, mask = 0400. Length of Instructions.
96-bit
Value = 0, select = 28, mask = 0800. Length of Instructions.
104-bit
Value = 0, select = 28, mask = 1000. Length of Instructions.
112-bit
Value = 0, select = 28, mask = 2000. Length of Instructions.
120-bit
Value = 0, select = 28, mask = 4000. Length of Instructions.
128-bit
```
2. Example calls second test.
```
I (1588) example: Start test with user defined statistic
Value = 743, select = 0, mask = 0001. Counts cycles.
Amount of cycles
Value = 417, select = 2, mask = 8dff. Successfully Retired Instructions.
JX instructions
CALLXn instructions
return instructions (RET, RETW, ...)
supervisor return instructions (RFDE, RFE, RFI, RFWO, RFWU)
Conditional branch instructions where execution
transfers to the target (aka. taken branch),
or loopgtz/loopnez instr where execution skips
the loop (aka. not-taken loop)
J instr
CALLn instr
Conditional branch instr where execution
falls through (aka. not-taken branch)
Loop instr where execution falls into loop (aka. taken loop)
Last inst of loop and execution transfers
to LBEG (aka. loopback taken)
Last inst of loop and execution falls
through to LEND (aka. loopback fallthrough)
Non-branch instr (aka. non-CTI)
Value = 3, select = 10, mask = 0004. Load Instruction (Data Memory).
Load from local memory i.e. DataRAM, DataROM, InstRAM, InstROM
Value = 0, select = 11, mask = 0004. Store Instruction (Data Memory).
Store to local memory i.e. DataRAM, InstRAM
Value = 321, select = 6, mask = 01ed. Hold and Other Bubble cycles.
Processor domain PSO bubble
R hold caused by Data Cache miss(unused)
R hold caused by Store release
R hold caused by MEMW, EXTW or EXCW
R hold caused by Halt instruction (TX only)
CTI bubble (e.g. branch delay slot)
WAITI bubble i.e. a cycle spent in WaitI power down mode.
Value = 0, select = 6, mask = 0010. Hold and Other Bubble cycles.
R hold caused by register dependency
Value = 0, select = 1, mask = 0001. Overflow of counter.
Overflow counter
I (1788) example: The End
```