esp-idf/components/soc/include/hal/i2c_hal.h

524 lines
13 KiB
C
Raw Normal View History

2019-06-04 23:32:20 -04:00
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The HAL layer for I2C
#pragma once
#include "hal/i2c_ll.h"
#include "hal/i2c_types.h"
/**
* @brief I2C hal Context definition
*/
typedef struct {
i2c_dev_t *dev;
uint32_t version;
} i2c_hal_context_t;
/**
* @brief Write the I2C rxfifo with the given length
*
* @param hal Context of the HAL layer
* @param wr_data Pointer to data buffer
* @param wr_size Amount of data needs write
*
* @return None
*/
#define i2c_hal_write_txfifo(hal,wr_data,wr_size) i2c_ll_write_txfifo((hal)->dev,wr_data,wr_size)
/**
* @brief Read the I2C rxfifo with the given length
*
* @param hal Context of the HAL layer
* @param buf Pointer to data buffer
* @param rd_size Amount of data needs read
*
* @return None
*/
#define i2c_hal_read_rxfifo(hal,buf,rd_size) i2c_ll_read_rxfifo((hal)->dev,buf,rd_size)
/**
* @brief Write I2C cmd register
*
* @param hal Context of the HAL layer
* @param cmd I2C hardware command
* @param cmd_idx The index of the command register, should be less than 16
*
* @return None
*/
#define i2c_hal_write_cmd_reg(hal,cmd, cmd_idx) i2c_ll_write_cmd_reg((hal)->dev,cmd,cmd_idx)
/**
* @brief Configure the I2C to triger a trasaction
*
* @param hal Context of the HAL layer
*
* @return None
*/
#define i2c_hal_trans_start(hal) i2c_ll_trans_start((hal)->dev)
/**
* @brief Enable I2C master RX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
#define i2c_hal_enable_master_rx_it(hal) i2c_ll_master_enable_rx_it((hal)->dev)
/**
* @brief Enable I2C master TX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
#define i2c_hal_enable_master_tx_it(hal) i2c_ll_master_enable_tx_it((hal)->dev)
/**
* @brief Clear I2C slave TX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
#define i2c_hal_slave_clr_tx_it(hal) i2c_ll_slave_clr_tx_it((hal)->dev)
/**
* @brief Clear I2C slave RX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
#define i2c_hal_slave_clr_rx_it(hal) i2c_ll_slave_clr_rx_it((hal)->dev)
/**
* @brief Init the I2C master.
2019-06-04 23:32:20 -04:00
*
* @param hal Context of the HAL layer
* @param i2c_num I2C port number
*
* @return None
*/
void i2c_hal_master_init(i2c_hal_context_t *hal, i2c_port_t i2c_num);
/**
* @brief Init the I2C slave.
2019-06-04 23:32:20 -04:00
*
* @param hal Context of the HAL layer
* @param i2c_num I2C port number
*
* @return None
*/
void i2c_hal_slave_init(i2c_hal_context_t *hal, i2c_port_t i2c_num);
/**
* @brief Reset the I2C hw txfifo
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_txfifo_rst(i2c_hal_context_t *hal);
/**
* @brief Reset the I2C hw rxfifo
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_rxfifo_rst(i2c_hal_context_t *hal);
/**
* @brief Configure the I2C data MSB bit shifted first or LSB bit shifted first.
*
* @param hal Context of the HAL layer
* @param tx_mode Data format of TX
* @param rx_mode Data format of RX
*
* @return None
*/
void i2c_hal_set_data_mode(i2c_hal_context_t *hal, i2c_trans_mode_t tx_mode, i2c_trans_mode_t rx_mode);
/**
* @brief Configure the I2C hardware filter function.
*
* @param hal Context of the HAL layer
* @param filter_num If the glitch period on the line is less than this value(in APB cycle), it will be filtered out
* If `filter_num == 0`, the filter will be disabled
*
* @return None
*/
void i2c_hal_set_filter(i2c_hal_context_t *hal, uint8_t filter_num);
/**
* @brief Get the I2C hardware filter configuration
*
* @param hal Context of the HAL layer
* @param filter_num Pointer to accept the hardware filter configuration
*
* @return None
*/
void i2c_hal_get_filter(i2c_hal_context_t *hal, uint8_t *filter_num);
/**
* @brief Configure the I2C SCL timing
*
* @param hal Context of the HAL layer
* @param hight_period SCL high period
* @param low_period SCL low period
*
* @return None
*/
void i2c_hal_set_scl_timing(i2c_hal_context_t *hal, int hight_period, int low_period);
/**
* @brief Configure the I2C master SCL frequency
*
* @param hal Context of the HAL layer
* @param src_clk The I2C Source clock frequency
* @param scl_freq The SCL frequency to be set
*
* @return None
*/
void i2c_hal_set_scl_freq(i2c_hal_context_t *hal, uint32_t src_clk, uint32_t scl_freq);
/**
* @brief Clear the I2C interrupt status with the given mask
*
* @param hal Context of the HAL layer
* @param mask The interrupt bitmap needs to be clearned
*
* @return None
*/
void i2c_hal_clr_intsts_mask(i2c_hal_context_t *hal, uint32_t mask);
/**
* @brief Enable the I2C interrupt with the given mask
*
* @param hal Context of the HAL layer
* @param mask The interrupt bitmap needs to be enabled
*
* @return None
*/
void i2c_hal_enable_intr_mask(i2c_hal_context_t *hal, uint32_t mask);
/**
* @brief Disable the I2C interrupt with the given mask
*
* @param hal Context of the HAL layer
* @param mask The interrupt bitmap needs to be disabled
*
* @return None
*/
void i2c_hal_disable_intr_mask(i2c_hal_context_t *hal, uint32_t mask);
/**
* @brief Configure the I2C memory access mode, FIFO mode or none FIFO mode
*
* @param hal Context of the HAL layer
* @param fifo_mode_en Set true to enable FIFO access mode, else set it false
*
* @return None
*/
void i2c_hal_set_fifo_mode(i2c_hal_context_t *hal, bool fifo_mode_en);
/**
* @brief Configure the I2C timeout value
*
* @param hal Context of the HAL layer
* @param tout_val the timeout value to be set
*
* @return None
*/
void i2c_hal_set_tout(i2c_hal_context_t *hal, int tout_val);
/**
* @brief Get the I2C time out configuration
*
* @param tout_val Pointer to accept the timeout configuration
*
* @return None
*/
void i2c_hal_get_tout(i2c_hal_context_t *hal, int *tout_val);
/**
* @brief Configure the I2C slave address
*
* @param hal Context of the HAL layer
* @param slave_addr Slave address
* @param addr_10bit_en Set true to enable 10-bit slave address mode, Set false to enable 7-bit address mode
*
* @return None
*/
void i2c_hal_set_slave_addr(i2c_hal_context_t *hal, uint16_t slave_addr, bool addr_10bit_en);
/**
* @brief Configure the I2C stop timing
*
* @param hal Context of the HAL layer
* @param stop_setup The stop condition setup period (in APB cycle)
* @param stop_hold The stop condition hold period (in APB cycle)
*
* @return None
*/
void i2c_hal_set_stop_timing(i2c_hal_context_t *hal, int stop_setup, int stop_hold);
/**
* @brief Configure the I2C start timing
*
* @param hal Context of the HAL layer
* @param start_setup The start condition setup period (in APB cycle)
* @param start_hold The start condition hold period (in APB cycle)
*
* @return None
*/
void i2c_hal_set_start_timing(i2c_hal_context_t *hal, int start_setup, int start_hold);
/**
* @brief Configure the I2C sda sample timing
*
* @param hal Context of the HAL layer
* @param sda_sample The SDA sample time (in APB cycle)
* @param sda_hold The SDA hold time (in APB cycle)
*
* @return None
*/
void i2c_hal_set_sda_timing(i2c_hal_context_t *hal, int sda_sample, int sda_hold);
/**
* @brief Configure the I2C txfifo empty threshold value
*
* @param hal Context of the HAL layer.
* @param empty_thr TxFIFO empty threshold value
*
* @return None
*/
void i2c_hal_set_txfifo_empty_thr(i2c_hal_context_t *hal, uint8_t empty_thr);
/**
* @brief Configure the I2C rxfifo full threshold value
*
* @param hal Context of the HAL layer
* @param full_thr RxFIFO full threshold value
*
* @return None
*/
void i2c_hal_set_rxfifo_full_thr(i2c_hal_context_t *hal, uint8_t full_thr);
/**
* @brief Get the I2C interrupt status
*
* @param hal Context of the HAL layer
* @param mask Pointer to accept the interrupt status
*
* @return None
*/
void i2c_hal_get_intsts_mask(i2c_hal_context_t *hal, uint32_t *mask);
/**
* @brief Check if the I2C bus is busy
*
* @param hal Context of the HAL layer
*
* @return True if the bus is busy, otherwise, fale will be returned
*/
bool i2c_hal_is_bus_busy(i2c_hal_context_t *hal);
/**
* @brief Get the I2C sda sample timing configuration
*
* @param hal Context of the HAL layer
* @param sample_time Pointer to accept the SDA sample time
* @param hold_time Pointer to accept the SDA hold time
*
* @return None
*/
void i2c_hal_get_sda_timing(i2c_hal_context_t *hal, int *sample_time, int *hold_time);
/**
* @brief Get the I2C stop timing configuration
*
* @param hal Context of the HAL layer
* @param setup_time Pointer to accept the stop condition setup period
* @param hold_time Pointer to accept the stop condition hold period
*
* @return None
*/
void i2c_hal_get_stop_timing(i2c_hal_context_t *hal, int *setup_time, int *hold_time);
/**
* @brief Get the I2C scl timing configuration
*
* @param hal Context of the HAL layer
* @param high_period Pointer to accept the scl high period
* @param low_period Pointer to accept the scl low period
*
* @return None
*/
void i2c_hal_get_scl_timing(i2c_hal_context_t *hal, int *high_period, int *low_period);
/**
* @brief Get the I2C start timing configuration
*
* @param hal Context of the HAL layer
* @param setup_time Pointer to accept the start condition setup period
* @param hold_time Pointer to accept the start condition hold period
*
* @return None
*/
void i2c_hal_get_start_timing(i2c_hal_context_t *hal, int *setup_time, int *hold_time);
/**
* @brief Check if the I2C is master mode
*
* @param hal Context of the HAL layer
*
* @return True if in master mode, otherwise, false will be returned
*/
bool i2c_hal_is_master_mode(i2c_hal_context_t *hal);
/**
* @brief Get the rxFIFO readable length
*
* @param hal Context of the HAL layer
* @param len Pointer to accept the rxFIFO readable length
*
* @return None
*/
void i2c_hal_get_rxfifo_cnt(i2c_hal_context_t *hal, uint32_t *len);
/**
* @brief Set I2C bus timing with the given frequency
*
* @param hal Context of the HAL layer
* @param scl_freq The scl frequency to be set
* @param src_clk Source clock of I2C
*
* @return None
*/
void i2c_hal_set_bus_timing(i2c_hal_context_t *hal, uint32_t scl_freq, i2c_sclk_t src_clk);
/**
* @brief Get I2C txFIFO writeable length
*
* @param hal Context of the HAL layer
* @param len Pointer to accept the txFIFO writeable length
*
* @return None
*/
void i2c_hal_get_txfifo_cnt(i2c_hal_context_t *hal, uint32_t *len);
/**
* @brief Check if the I2C is master mode
*
* @param hal Context of the HAL layer
* @param tx_mode Pointer to accept the TX data mode
* @param rx_mode Pointer to accept the RX data mode
*
* @return None
*/
void i2c_hal_get_data_mode(i2c_hal_context_t *hal, i2c_trans_mode_t *tx_mode, i2c_trans_mode_t *rx_mode);
/**
* @brief I2C hardware FSM reset
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_master_fsm_rst(i2c_hal_context_t *hal);
/**
* @brief @brief Clear I2C bus
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_master_clr_bus(i2c_hal_context_t *hal);
/**
* @brief Enable I2C slave TX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_enable_slave_tx_it(i2c_hal_context_t *hal);
/**
* @brief Disable I2C slave TX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_disable_slave_tx_it(i2c_hal_context_t *hal);
/**
* @brief Enable I2C slave RX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_enable_slave_rx_it(i2c_hal_context_t *hal);
/**
* @brief Disable I2C slave RX interrupt
*
* @param hal Context of the HAL layer
*
* @return None
*/
void i2c_hal_disable_slave_rx_it(i2c_hal_context_t *hal);
/**
* @brief I2C master handle tx interrupt event
*
* @param hal Context of the HAL layer
* @param event Pointer to accept the interrupt event
*
* @return None
*/
void i2c_hal_master_handle_tx_event(i2c_hal_context_t *hal, i2c_intr_event_t *event);
/**
* @brief I2C master handle rx interrupt event
*
* @param hal Context of the HAL layer
* @param event Pointer to accept the interrupt event
*
* @return None
*/
void i2c_hal_master_handle_rx_event(i2c_hal_context_t *hal, i2c_intr_event_t *event);
/**
* @brief I2C slave handle interrupt event
*
* @param hal Context of the HAL layer
* @param event Pointer to accept the interrupt event
*
* @return None
*/
void i2c_hal_slave_handle_event(i2c_hal_context_t *hal, i2c_intr_event_t *event);