esp-idf/tools/cmake/project.cmake

727 lines
31 KiB
CMake
Raw Normal View History

# Designed to be included from an IDF app's CMakeLists.txt file
cmake_minimum_required(VERSION 3.16)
# Get the currently selected sdkconfig file early, so this doesn't
# have to be done multiple times on different places.
if(SDKCONFIG)
get_filename_component(sdkconfig "${SDKCONFIG}" ABSOLUTE)
else()
set(sdkconfig "${CMAKE_SOURCE_DIR}/sdkconfig")
endif()
# Check if the cmake was started as part of the set-target action.
# If so, check for existing sdkconfig file and rename it.
# This is done before __target_init, so the existing IDF_TARGET from sdkconfig
# is not considered for consistence checking.
if("$ENV{_IDF_PY_SET_TARGET_ACTION}" EQUAL "1" AND EXISTS "${sdkconfig}")
file(RENAME "${sdkconfig}" "${sdkconfig}.old")
message(STATUS "Existing sdkconfig '${sdkconfig}' renamed to '${sdkconfig}.old'.")
endif()
include(${CMAKE_CURRENT_LIST_DIR}/targets.cmake)
# Initialize build target for this build using the environment variable or
# value passed externally.
__target_init("${sdkconfig}")
# The mere inclusion of this CMake file sets up some internal build properties.
2019-04-26 01:42:10 -04:00
# These properties can be modified in between this inclusion the the idf_build_process
# call.
include(${CMAKE_CURRENT_LIST_DIR}/idf.cmake)
# setting PYTHON variable here for compatibility only, new code should use
# idf_build_get_property(variable PYTHON)
idf_build_get_property(PYTHON PYTHON)
if(NOT PYTHON)
message(FATAL_ERROR "Internal error, PYTHON build property not set correctly.")
endif()
# legacy variable for compatibility
set(IDFTOOL ${PYTHON} "${IDF_PATH}/tools/idf.py")
2019-04-26 01:42:10 -04:00
# On processing, checking Python required modules can be turned off if it was
# already checked externally.
if(PYTHON_DEPS_CHECKED)
idf_build_set_property(__CHECK_PYTHON 0)
endif()
# Store CMake arguments that need to be passed into all CMake sub-projects as well
# (bootloader, ULP, etc)
#
# It's not possible to tell if CMake was called with --warn-uninitialized, so to also
# have these warnings in sub-projects we set a cache variable as well and then check that.
if(WARN_UNINITIALIZED)
idf_build_set_property(EXTRA_CMAKE_ARGS --warn-uninitialized)
else()
idf_build_set_property(EXTRA_CMAKE_ARGS "")
endif()
# Enable the component manager for regular projects if not explicitly disabled.
if(NOT "$ENV{IDF_COMPONENT_MANAGER}" EQUAL "0")
idf_build_set_property(IDF_COMPONENT_MANAGER 1)
endif()
# Set component manager interface version
idf_build_set_property(__COMPONENT_MANAGER_INTERFACE_VERSION 2)
2019-04-26 01:42:10 -04:00
#
# Get the project version from either a version file or the Git revision. This is passed
# to the idf_build_process call. Dependencies are also set here for when the version file
# changes (if it is used).
#
function(__project_get_revision var)
set(_project_path "${CMAKE_CURRENT_LIST_DIR}")
if(NOT DEFINED PROJECT_VER)
if(EXISTS "${_project_path}/version.txt")
file(STRINGS "${_project_path}/version.txt" PROJECT_VER)
set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS "${_project_path}/version.txt")
else()
git_describe(PROJECT_VER_GIT "${_project_path}")
if(PROJECT_VER_GIT)
set(PROJECT_VER ${PROJECT_VER_GIT})
else()
message(STATUS "Could not use 'git describe' to determine PROJECT_VER.")
set(PROJECT_VER 1)
2019-04-26 01:42:10 -04:00
endif()
endif()
endif()
set(${var} "${PROJECT_VER}" PARENT_SCOPE)
endfunction()
# paths_with_spaces_to_list
#
# Replacement for spaces2list in cases where it was previously used on
# directory lists.
#
# If the variable doesn't contain spaces, (e.g. is already a CMake list)
# then the variable is unchanged. Otherwise an external Python script is called
# to try to split the paths, and the variable is updated with the result.
#
# This feature is added only for compatibility. Please do not introduce new
# space separated path lists.
#
function(paths_with_spaces_to_list variable_name)
if("${${variable_name}}" MATCHES "[ \t]")
idf_build_get_property(python PYTHON)
idf_build_get_property(idf_path IDF_PATH)
execute_process(
COMMAND ${python}
"${idf_path}/tools/split_paths_by_spaces.py"
"--var-name=${variable_name}"
"${${variable_name}}"
WORKING_DIRECTORY "${CMAKE_CURRENT_LIST_DIR}"
OUTPUT_VARIABLE result
RESULT_VARIABLE ret)
if(NOT ret EQUAL 0)
message(FATAL_ERROR "Failed to parse ${variable_name}, see diagnostics above")
endif()
set("${variable_name}" "${result}" PARENT_SCOPE)
endif()
endfunction()
tools: extend information in project_description.json This extends information provided in the project_description.json file. Newly added information can be used in the SBOM generating tool and also to improve hints regarding the the component dependency issues. Added fields version: This adds versioning to the project_description.json file, so it's easy to identify if it contains the required information. project_version: Can be used as a version for the resulting binary e.g. `hello_world.bin`. idf_path: This one is probably not necessary, but it allows tools to run even without esp-idf environment exported(e.g. export.sh). c_compiler: The `CMAKE_C_COMPILER` value with full path to the compiler binary. This can be used to get information about toolchain, which was used to build the project. common_component_reqs: List of common components as presented in cmake's __COMPONENT_REQUIRES_COMMON and set in tools/cmake/build.cmake:__build_init(). build_component_info: Detailed information about components used during build. It's a dictionary with the component name as a key and each component has a dictionary with detailed information. Following is an example for the efuse component. "efuse": { "alias": "idf::efuse", "target": "___idf_efuse", "prefix": "idf", "dir": "/home/fhrbata/work/esp-idf/components/efuse", "type": "LIBRARY", "lib": "__idf_efuse", "reqs": [], "priv_reqs": [ "bootloader_support", "soc", "spi_flash" ], "managed_reqs": [], "managed_priv_reqs": [], "file": "/home/fhrbata/work/blink/build/esp-idf/efuse/libefuse.a", "sources": [ "/home/fhrbata/work/esp-idf/components/efuse/esp32s3/esp_efuse_table.c", ... ], "include_dirs": [ "include", "esp32s3/include" ] } Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
2023-04-14 08:55:04 -04:00
function(__component_info components output)
set(components_json "")
foreach(name ${components})
__component_get_target(target ${name})
__component_get_property(alias ${target} COMPONENT_ALIAS)
__component_get_property(prefix ${target} __PREFIX)
__component_get_property(dir ${target} COMPONENT_DIR)
__component_get_property(type ${target} COMPONENT_TYPE)
__component_get_property(lib ${target} COMPONENT_LIB)
__component_get_property(reqs ${target} REQUIRES)
__component_get_property(include_dirs ${target} INCLUDE_DIRS)
__component_get_property(priv_reqs ${target} PRIV_REQUIRES)
__component_get_property(managed_reqs ${target} MANAGED_REQUIRES)
__component_get_property(managed_priv_reqs ${target} MANAGED_PRIV_REQUIRES)
if("${type}" STREQUAL "LIBRARY")
set(file "$<TARGET_LINKER_FILE:${lib}>")
# The idf_component_register function is converting each source file path defined
# in SRCS into absolute one. But source files can be also added with cmake's
# target_sources and have relative paths. This is used for example in log
# component. Let's make sure all source files have absolute path.
set(sources "")
get_target_property(srcs ${lib} SOURCES)
foreach(src ${srcs})
get_filename_component(src "${src}" ABSOLUTE BASE_DIR "${dir}")
list(APPEND sources "${src}")
endforeach()
else()
set(file "")
set(sources "")
endif()
make_json_list("${reqs}" reqs)
make_json_list("${priv_reqs}" priv_reqs)
make_json_list("${managed_reqs}" managed_reqs)
make_json_list("${managed_priv_reqs}" managed_priv_reqs)
make_json_list("${include_dirs}" include_dirs)
make_json_list("${sources}" sources)
string(JOIN "\n" component_json
" \"${name}\": {"
" \"alias\": \"${alias}\","
" \"target\": \"${target}\","
" \"prefix\": \"${prefix}\","
" \"dir\": \"${dir}\","
" \"type\": \"${type}\","
" \"lib\": \"${lib}\","
" \"reqs\": ${reqs},"
" \"priv_reqs\": ${priv_reqs},"
" \"managed_reqs\": ${managed_reqs},"
" \"managed_priv_reqs\": ${managed_priv_reqs},"
" \"file\": \"${file}\","
" \"sources\": ${sources},"
" \"include_dirs\": ${include_dirs}"
" }"
)
string(CONFIGURE "${component_json}" component_json)
if(NOT "${components_json}" STREQUAL "")
string(APPEND components_json ",\n")
endif()
string(APPEND components_json "${component_json}")
endforeach()
string(PREPEND components_json "{\n")
string(APPEND components_json "\n }")
set(${output} "${components_json}" PARENT_SCOPE)
endfunction()
2019-04-26 01:42:10 -04:00
#
# Output the built components to the user. Generates files for invoking esp_idf_monitor
2019-04-26 01:42:10 -04:00
# that doubles as an overview of some of the more important build properties.
#
function(__project_info test_components)
idf_build_get_property(prefix __PREFIX)
idf_build_get_property(_build_components BUILD_COMPONENTS)
idf_build_get_property(build_dir BUILD_DIR)
idf_build_get_property(idf_path IDF_PATH)
list(SORT _build_components)
unset(build_components)
unset(build_component_paths)
foreach(build_component ${_build_components})
__component_get_target(component_target "${build_component}")
__component_get_property(_name ${component_target} COMPONENT_NAME)
__component_get_property(_prefix ${component_target} __PREFIX)
__component_get_property(_alias ${component_target} COMPONENT_ALIAS)
__component_get_property(_dir ${component_target} COMPONENT_DIR)
if(_alias IN_LIST test_components)
list(APPEND test_component_paths ${_dir})
else()
if(_prefix STREQUAL prefix)
set(component ${_name})
else()
set(component ${_alias})
endif()
list(APPEND build_components ${component})
list(APPEND build_component_paths ${_dir})
endif()
endforeach()
set(PROJECT_NAME ${CMAKE_PROJECT_NAME})
tools: extend information in project_description.json This extends information provided in the project_description.json file. Newly added information can be used in the SBOM generating tool and also to improve hints regarding the the component dependency issues. Added fields version: This adds versioning to the project_description.json file, so it's easy to identify if it contains the required information. project_version: Can be used as a version for the resulting binary e.g. `hello_world.bin`. idf_path: This one is probably not necessary, but it allows tools to run even without esp-idf environment exported(e.g. export.sh). c_compiler: The `CMAKE_C_COMPILER` value with full path to the compiler binary. This can be used to get information about toolchain, which was used to build the project. common_component_reqs: List of common components as presented in cmake's __COMPONENT_REQUIRES_COMMON and set in tools/cmake/build.cmake:__build_init(). build_component_info: Detailed information about components used during build. It's a dictionary with the component name as a key and each component has a dictionary with detailed information. Following is an example for the efuse component. "efuse": { "alias": "idf::efuse", "target": "___idf_efuse", "prefix": "idf", "dir": "/home/fhrbata/work/esp-idf/components/efuse", "type": "LIBRARY", "lib": "__idf_efuse", "reqs": [], "priv_reqs": [ "bootloader_support", "soc", "spi_flash" ], "managed_reqs": [], "managed_priv_reqs": [], "file": "/home/fhrbata/work/blink/build/esp-idf/efuse/libefuse.a", "sources": [ "/home/fhrbata/work/esp-idf/components/efuse/esp32s3/esp_efuse_table.c", ... ], "include_dirs": [ "include", "esp32s3/include" ] } Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
2023-04-14 08:55:04 -04:00
idf_build_get_property(PROJECT_VER PROJECT_VER)
2019-04-26 01:42:10 -04:00
idf_build_get_property(PROJECT_PATH PROJECT_DIR)
idf_build_get_property(BUILD_DIR BUILD_DIR)
idf_build_get_property(SDKCONFIG SDKCONFIG)
idf_build_get_property(SDKCONFIG_DEFAULTS SDKCONFIG_DEFAULTS)
idf_build_get_property(PROJECT_EXECUTABLE EXECUTABLE)
set(PROJECT_BIN ${CMAKE_PROJECT_NAME}.bin)
idf_build_get_property(IDF_VER IDF_VER)
tools: extend information in project_description.json This extends information provided in the project_description.json file. Newly added information can be used in the SBOM generating tool and also to improve hints regarding the the component dependency issues. Added fields version: This adds versioning to the project_description.json file, so it's easy to identify if it contains the required information. project_version: Can be used as a version for the resulting binary e.g. `hello_world.bin`. idf_path: This one is probably not necessary, but it allows tools to run even without esp-idf environment exported(e.g. export.sh). c_compiler: The `CMAKE_C_COMPILER` value with full path to the compiler binary. This can be used to get information about toolchain, which was used to build the project. common_component_reqs: List of common components as presented in cmake's __COMPONENT_REQUIRES_COMMON and set in tools/cmake/build.cmake:__build_init(). build_component_info: Detailed information about components used during build. It's a dictionary with the component name as a key and each component has a dictionary with detailed information. Following is an example for the efuse component. "efuse": { "alias": "idf::efuse", "target": "___idf_efuse", "prefix": "idf", "dir": "/home/fhrbata/work/esp-idf/components/efuse", "type": "LIBRARY", "lib": "__idf_efuse", "reqs": [], "priv_reqs": [ "bootloader_support", "soc", "spi_flash" ], "managed_reqs": [], "managed_priv_reqs": [], "file": "/home/fhrbata/work/blink/build/esp-idf/efuse/libefuse.a", "sources": [ "/home/fhrbata/work/esp-idf/components/efuse/esp32s3/esp_efuse_table.c", ... ], "include_dirs": [ "include", "esp32s3/include" ] } Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
2023-04-14 08:55:04 -04:00
idf_build_get_property(common_component_reqs __COMPONENT_REQUIRES_COMMON)
2019-04-26 01:42:10 -04:00
idf_build_get_property(sdkconfig_cmake SDKCONFIG_CMAKE)
include(${sdkconfig_cmake})
idf_build_get_property(COMPONENT_KCONFIGS KCONFIGS)
idf_build_get_property(COMPONENT_KCONFIGS_PROJBUILD KCONFIG_PROJBUILDS)
idf_build_get_property(debug_prefix_map_gdbinit DEBUG_PREFIX_MAP_GDBINIT)
2019-04-26 01:42:10 -04:00
2023-01-30 05:03:59 -05:00
if(CONFIG_APP_BUILD_TYPE_RAM)
set(PROJECT_BUILD_TYPE ram_app)
else()
set(PROJECT_BUILD_TYPE flash_app)
endif()
2019-04-26 01:42:10 -04:00
# Write project description JSON file
idf_build_get_property(build_dir BUILD_DIR)
make_json_list("${build_components};${test_components}" build_components_json)
make_json_list("${build_component_paths};${test_component_paths}" build_component_paths_json)
tools: extend information in project_description.json This extends information provided in the project_description.json file. Newly added information can be used in the SBOM generating tool and also to improve hints regarding the the component dependency issues. Added fields version: This adds versioning to the project_description.json file, so it's easy to identify if it contains the required information. project_version: Can be used as a version for the resulting binary e.g. `hello_world.bin`. idf_path: This one is probably not necessary, but it allows tools to run even without esp-idf environment exported(e.g. export.sh). c_compiler: The `CMAKE_C_COMPILER` value with full path to the compiler binary. This can be used to get information about toolchain, which was used to build the project. common_component_reqs: List of common components as presented in cmake's __COMPONENT_REQUIRES_COMMON and set in tools/cmake/build.cmake:__build_init(). build_component_info: Detailed information about components used during build. It's a dictionary with the component name as a key and each component has a dictionary with detailed information. Following is an example for the efuse component. "efuse": { "alias": "idf::efuse", "target": "___idf_efuse", "prefix": "idf", "dir": "/home/fhrbata/work/esp-idf/components/efuse", "type": "LIBRARY", "lib": "__idf_efuse", "reqs": [], "priv_reqs": [ "bootloader_support", "soc", "spi_flash" ], "managed_reqs": [], "managed_priv_reqs": [], "file": "/home/fhrbata/work/blink/build/esp-idf/efuse/libefuse.a", "sources": [ "/home/fhrbata/work/esp-idf/components/efuse/esp32s3/esp_efuse_table.c", ... ], "include_dirs": [ "include", "esp32s3/include" ] } Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
2023-04-14 08:55:04 -04:00
make_json_list("${common_component_reqs}" common_component_reqs_json)
__component_info("${build_components};${test_components}" build_component_info_json)
# The configure_file function doesn't process generator expressions, which are needed
# e.g. to get component target library(TARGET_LINKER_FILE), so the project_description
# file is created in two steps. The first step, with configure_file, creates a temporary
# file with cmake's variables substituted and unprocessed generator expressions. The second
# step, with file(GENERATE), processes the temporary file and substitute generator expression
# into the final project_description.json file.
2019-04-26 01:42:10 -04:00
configure_file("${idf_path}/tools/cmake/project_description.json.in"
tools: extend information in project_description.json This extends information provided in the project_description.json file. Newly added information can be used in the SBOM generating tool and also to improve hints regarding the the component dependency issues. Added fields version: This adds versioning to the project_description.json file, so it's easy to identify if it contains the required information. project_version: Can be used as a version for the resulting binary e.g. `hello_world.bin`. idf_path: This one is probably not necessary, but it allows tools to run even without esp-idf environment exported(e.g. export.sh). c_compiler: The `CMAKE_C_COMPILER` value with full path to the compiler binary. This can be used to get information about toolchain, which was used to build the project. common_component_reqs: List of common components as presented in cmake's __COMPONENT_REQUIRES_COMMON and set in tools/cmake/build.cmake:__build_init(). build_component_info: Detailed information about components used during build. It's a dictionary with the component name as a key and each component has a dictionary with detailed information. Following is an example for the efuse component. "efuse": { "alias": "idf::efuse", "target": "___idf_efuse", "prefix": "idf", "dir": "/home/fhrbata/work/esp-idf/components/efuse", "type": "LIBRARY", "lib": "__idf_efuse", "reqs": [], "priv_reqs": [ "bootloader_support", "soc", "spi_flash" ], "managed_reqs": [], "managed_priv_reqs": [], "file": "/home/fhrbata/work/blink/build/esp-idf/efuse/libefuse.a", "sources": [ "/home/fhrbata/work/esp-idf/components/efuse/esp32s3/esp_efuse_table.c", ... ], "include_dirs": [ "include", "esp32s3/include" ] } Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
2023-04-14 08:55:04 -04:00
"${build_dir}/project_description.json.templ")
file(READ "${build_dir}/project_description.json.templ" project_description_json_templ)
file(REMOVE "${build_dir}/project_description.json.templ")
file(GENERATE OUTPUT "${build_dir}/project_description.json"
CONTENT "${project_description_json_templ}")
2019-04-26 01:42:10 -04:00
# Generate component dependency graph
depgraph_generate("${build_dir}/component_deps.dot")
2019-04-26 01:42:10 -04:00
# We now have the following component-related variables:
#
# build_components is the list of components to include in the build.
# build_component_paths is the paths to all of these components, obtained from the component dependencies file.
#
# Print the list of found components and test components
string(REPLACE ";" " " build_components "${build_components}")
string(REPLACE ";" " " build_component_paths "${build_component_paths}")
message(STATUS "Components: ${build_components}")
message(STATUS "Component paths: ${build_component_paths}")
if(test_components)
string(REPLACE ";" " " test_components "${test_components}")
string(REPLACE ";" " " test_component_paths "${test_component_paths}")
message(STATUS "Test components: ${test_components}")
message(STATUS "Test component paths: ${test_component_paths}")
endif()
endfunction()
2019-04-26 01:42:10 -04:00
function(__project_init components_var test_components_var)
# Use EXTRA_CFLAGS, EXTRA_CXXFLAGS and EXTRA_CPPFLAGS to add more priority options to the compiler
# EXTRA_CPPFLAGS is used for both C and C++
# Unlike environments' CFLAGS/CXXFLAGS/CPPFLAGS which work for both host and target build,
# these works only for target build
set(extra_cflags "$ENV{EXTRA_CFLAGS}")
set(extra_cxxflags "$ENV{EXTRA_CXXFLAGS}")
set(extra_cppflags "$ENV{EXTRA_CPPFLAGS}")
spaces2list(extra_cflags)
spaces2list(extra_cxxflags)
spaces2list(extra_cppflags)
idf_build_set_property(C_COMPILE_OPTIONS "${extra_cflags}" APPEND)
idf_build_set_property(CXX_COMPILE_OPTIONS "${extra_cxxflags}" APPEND)
idf_build_set_property(COMPILE_OPTIONS "${extra_cppflags}" APPEND)
function(__project_component_dir component_dir)
get_filename_component(component_dir "${component_dir}" ABSOLUTE)
# The directory itself is a valid idf component
2019-04-26 01:42:10 -04:00
if(EXISTS ${component_dir}/CMakeLists.txt)
idf_build_component(${component_dir})
else()
# otherwise, check whether the subfolders are potential idf components
2019-04-26 01:42:10 -04:00
file(GLOB component_dirs ${component_dir}/*)
foreach(component_dir ${component_dirs})
if(IS_DIRECTORY ${component_dir})
__component_dir_quick_check(is_component ${component_dir})
if(is_component)
idf_build_component(${component_dir})
endif()
2019-04-26 01:42:10 -04:00
endif()
endforeach()
endif()
endfunction()
2019-04-26 01:42:10 -04:00
# Add component directories to the build, given the component filters, exclusions
# extra directories, etc. passed from the root CMakeLists.txt.
if(COMPONENT_DIRS)
2019-04-26 01:42:10 -04:00
# User wants to fully override where components are pulled from.
paths_with_spaces_to_list(COMPONENT_DIRS)
2019-04-26 01:42:10 -04:00
idf_build_set_property(__COMPONENT_TARGETS "")
foreach(component_dir ${COMPONENT_DIRS})
get_filename_component(component_abs_path ${component_dir} ABSOLUTE)
if(NOT EXISTS ${component_abs_path})
message(FATAL_ERROR "Directory specified in COMPONENT_DIRS doesn't exist: ${component_abs_path}")
endif()
2019-04-26 01:42:10 -04:00
__project_component_dir(${component_dir})
endforeach()
2019-04-26 01:42:10 -04:00
else()
if(EXISTS "${CMAKE_CURRENT_LIST_DIR}/main")
__project_component_dir("${CMAKE_CURRENT_LIST_DIR}/main")
endif()
paths_with_spaces_to_list(EXTRA_COMPONENT_DIRS)
foreach(component_dir ${EXTRA_COMPONENT_DIRS})
get_filename_component(component_abs_path ${component_dir} ABSOLUTE)
if(NOT EXISTS ${component_abs_path})
message(FATAL_ERROR "Directory specified in EXTRA_COMPONENT_DIRS doesn't exist: ${component_abs_path}")
endif()
__project_component_dir("${component_dir}")
endforeach()
2019-04-26 01:42:10 -04:00
# Look for components in the usual places: CMAKE_CURRENT_LIST_DIR/main,
# extra component dirs, and CMAKE_CURRENT_LIST_DIR/components
__project_component_dir("${CMAKE_CURRENT_LIST_DIR}/components")
endif()
# For bootloader components, we only need to set-up the Kconfig files.
# Indeed, bootloader is currently compiled as a subproject, thus,
# its components are not part of the main project.
# However, in order to be able to configure these bootloader components
# using menuconfig, we need to look for their Kconfig-related files now.
file(GLOB bootloader_component_dirs "${CMAKE_CURRENT_LIST_DIR}/bootloader_components/*")
list(SORT bootloader_component_dirs)
foreach(bootloader_component_dir ${bootloader_component_dirs})
if(IS_DIRECTORY ${bootloader_component_dir})
__component_dir_quick_check(is_component ${bootloader_component_dir})
if(is_component)
__kconfig_bootloader_component_add("${bootloader_component_dir}")
endif()
endif()
endforeach()
2019-04-26 01:42:10 -04:00
spaces2list(COMPONENTS)
spaces2list(EXCLUDE_COMPONENTS)
idf_build_get_property(component_targets __COMPONENT_TARGETS)
foreach(component_target ${component_targets})
__component_get_property(component_name ${component_target} COMPONENT_NAME)
set(include 1)
if(COMPONENTS AND NOT component_name IN_LIST COMPONENTS)
set(include 0)
endif()
if(EXCLUDE_COMPONENTS AND component_name IN_LIST EXCLUDE_COMPONENTS)
set(include 0)
endif()
if(include)
list(APPEND components ${component_name})
endif()
endforeach()
if(TESTS_ALL OR BUILD_TESTS OR TEST_COMPONENTS OR TEST_EXCLUDE_COMPONENTS)
spaces2list(TEST_COMPONENTS)
spaces2list(TEST_EXCLUDE_COMPONENTS)
idf_build_get_property(component_targets __COMPONENT_TARGETS)
foreach(component_target ${component_targets})
__component_get_property(component_dir ${component_target} COMPONENT_DIR)
__component_get_property(component_name ${component_target} COMPONENT_NAME)
if(component_name IN_LIST components)
set(include 1)
if(TEST_COMPONENTS AND NOT component_name IN_LIST TEST_COMPONENTS)
set(include 0)
endif()
if(TEST_EXCLUDE_COMPONENTS AND component_name IN_LIST TEST_EXCLUDE_COMPONENTS)
set(include 0)
endif()
if(include AND EXISTS ${component_dir}/test)
__component_add(${component_dir}/test ${component_name})
list(APPEND test_components ${component_name}::test)
endif()
endif()
endforeach()
2018-08-26 22:48:16 -04:00
endif()
2019-04-26 01:42:10 -04:00
set(${components_var} "${components}" PARENT_SCOPE)
set(${test_components_var} "${test_components}" PARENT_SCOPE)
endfunction()
# Trick to temporarily redefine project(). When functions are overridden in CMake, the originals can still be accessed
2019-04-26 01:42:10 -04:00
# using an underscore prefixed function of the same name. The following lines make sure that __project calls
# the original project(). See https://cmake.org/pipermail/cmake/2015-October/061751.html.
function(project)
endfunction()
2019-04-26 01:42:10 -04:00
function(_project)
endfunction()
2019-04-26 01:42:10 -04:00
macro(project project_name)
# Initialize project, preparing COMPONENTS argument for idf_build_process()
# call later using external COMPONENT_DIRS, COMPONENTS_DIRS, EXTRA_COMPONENTS_DIR,
# EXTRA_COMPONENTS_DIRS, COMPONENTS, EXLUDE_COMPONENTS, TEST_COMPONENTS,
# TEST_EXLUDE_COMPONENTS, TESTS_ALL, BUILD_TESTS
__project_init(components test_components)
2019-04-26 01:42:10 -04:00
__target_set_toolchain()
2019-06-27 02:25:28 -04:00
if(CCACHE_ENABLE)
find_program(CCACHE_FOUND ccache)
if(CCACHE_FOUND)
message(STATUS "ccache will be used for faster recompilation")
set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE ccache)
2019-06-27 02:25:28 -04:00
else()
message(WARNING "enabled ccache in build but ccache program not found")
endif()
endif()
2019-04-26 01:42:10 -04:00
# The actual call to project()
__project(${project_name} C CXX ASM)
# Generate compile_commands.json (needs to come after project call).
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
2019-04-26 01:42:10 -04:00
# If CMAKE_COLOR_DIAGNOSTICS not set in project CMakeLists.txt or in the environment,
# enable it by default.
if(NOT DEFINED CMAKE_COLOR_DIAGNOSTICS AND NOT DEFINED ENV{CMAKE_COLOR_DIAGNOSTICS})
set(CMAKE_COLOR_DIAGNOSTICS ON)
endif()
2019-04-26 01:42:10 -04:00
# Since components can import third-party libraries, the original definition of project() should be restored
# before the call to add components to the build.
function(project)
set(project_ARGV ARGV)
__project(${${project_ARGV}})
# Set the variables that project() normally sets, documented in the
# command's docs.
#
# https://cmake.org/cmake/help/v3.16/command/project.html
#
# There is some nuance when it comes to setting version variables in terms of whether
# CMP0048 is set to OLD or NEW. However, the proper behavior should have bee already handled by the original
# project call, and we're just echoing the values those variables were set to.
set(PROJECT_NAME "${PROJECT_NAME}" PARENT_SCOPE)
set(PROJECT_BINARY_DIR "${PROJECT_BINARY_DIR}" PARENT_SCOPE)
set(PROJECT_SOURCE_DIR "${PROJECT_SOURCE_DIR}" PARENT_SCOPE)
set(PROJECT_VERSION "${PROJECT_VERSION}" PARENT_SCOPE)
set(PROJECT_VERSION_MAJOR "${PROJECT_VERSION_MAJOR}" PARENT_SCOPE)
set(PROJECT_VERSION_MINOR "${PROJECT_VERSION_MINOR}" PARENT_SCOPE)
set(PROJECT_VERSION_PATCH "${PROJECT_VERSION_PATCH}" PARENT_SCOPE)
set(PROJECT_VERSION_TWEAK "${PROJECT_VERSION_TWEAK}" PARENT_SCOPE)
set(PROJECT_DESCRIPTION "${PROJECT_DESCRIPTION}" PARENT_SCOPE)
set(PROJECT_HOMEPAGE_URL "${PROJECT_HOMEPAGE_URL}" PARENT_SCOPE)
set(${PROJECT_NAME}_BINARY_DIR "${${PROJECT_NAME}_BINARY_DIR}" PARENT_SCOPE)
set(${PROJECT_NAME}_SOURCE_DIR "${${PROJECT_NAME}_SOURCE_DIR}" PARENT_SCOPE)
set(${PROJECT_NAME}_VERSION "${${PROJECT_NAME}_VERSION}" PARENT_SCOPE)
set(${PROJECT_NAME}_VERSION_MAJOR "${${PROJECT_NAME}_VERSION_MAJOR}" PARENT_SCOPE)
set(${PROJECT_NAME}_VERSION_MINOR "${${PROJECT_NAME}_VERSION_MINOR}" PARENT_SCOPE)
set(${PROJECT_NAME}_VERSION_PATCH "${${PROJECT_NAME}_VERSION_PATCH}" PARENT_SCOPE)
set(${PROJECT_NAME}_VERSION_TWEAK "${${PROJECT_NAME}_VERSION_TWEAK}" PARENT_SCOPE)
set(${PROJECT_NAME}_DESCRIPTION "${${PROJECT_NAME}_DESCRIPTION}" PARENT_SCOPE)
set(${PROJECT_NAME}_HOMEPAGE_URL "${${PROJECT_NAME}_HOMEPAGE_URL}" PARENT_SCOPE)
2019-04-26 01:42:10 -04:00
endfunction()
# Prepare the following arguments for the idf_build_process() call using external
# user values:
#
# SDKCONFIG_DEFAULTS is from external SDKCONFIG_DEFAULTS
# SDKCONFIG is from external SDKCONFIG
# BUILD_DIR is set to project binary dir
#
# PROJECT_NAME is taken from the passed name from project() call
# PROJECT_DIR is set to the current directory
# PROJECT_VER is from the version text or git revision of the current repo
# SDKCONFIG_DEFAULTS environment variable may specify a file name relative to the root of the project.
# When building the bootloader, ignore this variable, since:
# 1. The bootloader project uses an existing SDKCONFIG file from the top-level project
# 2. File specified by SDKCONFIG_DEFAULTS will not be found relative to the root of the bootloader project
if(NOT BOOTLOADER_BUILD)
set(_sdkconfig_defaults "$ENV{SDKCONFIG_DEFAULTS}")
endif()
if(NOT _sdkconfig_defaults)
2019-04-26 01:42:10 -04:00
if(EXISTS "${CMAKE_SOURCE_DIR}/sdkconfig.defaults")
set(_sdkconfig_defaults "${CMAKE_SOURCE_DIR}/sdkconfig.defaults")
2019-04-26 01:42:10 -04:00
else()
set(_sdkconfig_defaults "")
2019-04-26 01:42:10 -04:00
endif()
endif()
if(SDKCONFIG_DEFAULTS)
set(_sdkconfig_defaults "${SDKCONFIG_DEFAULTS}")
endif()
foreach(sdkconfig_default ${_sdkconfig_defaults})
get_filename_component(sdkconfig_default "${sdkconfig_default}" ABSOLUTE)
if(NOT EXISTS "${sdkconfig_default}")
message(FATAL_ERROR "SDKCONFIG_DEFAULTS '${sdkconfig_default}' does not exist.")
endif()
list(APPEND sdkconfig_defaults ${sdkconfig_default})
endforeach()
2019-04-26 01:42:10 -04:00
if(BUILD_DIR)
get_filename_component(build_dir "${BUILD_DIR}" ABSOLUTE)
if(NOT EXISTS "${build_dir}")
message(FATAL_ERROR "BUILD_DIR '${build_dir}' does not exist.")
endif()
else()
2019-04-26 01:42:10 -04:00
set(build_dir ${CMAKE_BINARY_DIR})
endif()
2019-04-26 01:42:10 -04:00
__project_get_revision(project_ver)
message(STATUS "Building ESP-IDF components for target ${IDF_TARGET}")
idf_build_process(${IDF_TARGET}
SDKCONFIG_DEFAULTS "${sdkconfig_defaults}"
SDKCONFIG ${sdkconfig}
BUILD_DIR ${build_dir}
PROJECT_NAME ${CMAKE_PROJECT_NAME}
PROJECT_DIR ${CMAKE_CURRENT_LIST_DIR}
PROJECT_VER "${project_ver}"
COMPONENTS "${components};${test_components}")
# Special treatment for 'main' component for standard projects (not part of core build system).
# Have it depend on every other component in the build. This is
# a convenience behavior for the standard project; thus is done outside of the core build system
# so that it treats components equally.
#
# This behavior should only be when user did not set REQUIRES/PRIV_REQUIRES manually.
idf_build_get_property(build_components BUILD_COMPONENT_ALIASES)
2019-04-26 01:42:10 -04:00
if(idf::main IN_LIST build_components)
__component_get_target(main_target idf::main)
__component_get_property(reqs ${main_target} REQUIRES)
__component_get_property(priv_reqs ${main_target} PRIV_REQUIRES)
__component_get_property(managed_reqs ${main_target} MANAGED_REQUIRES)
__component_get_property(managed_priv_reqs ${main_target} MANAGED_PRIV_REQUIRES)
#if user has not set any requirements, except ones added with the component manager
if((NOT reqs OR reqs STREQUAL managed_reqs) AND (NOT priv_reqs OR priv_reqs STREQUAL managed_priv_reqs))
if(test_components)
list(REMOVE_ITEM build_components ${test_components})
endif()
2019-04-26 01:42:10 -04:00
list(REMOVE_ITEM build_components idf::main)
__component_get_property(lib ${main_target} COMPONENT_LIB)
set_property(TARGET ${lib} APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${build_components}")
get_property(type TARGET ${lib} PROPERTY TYPE)
if(type STREQUAL STATIC_LIBRARY)
set_property(TARGET ${lib} APPEND PROPERTY LINK_LIBRARIES "${build_components}")
endif()
endif()
endif()
2019-04-26 01:42:10 -04:00
set(project_elf ${CMAKE_PROJECT_NAME}.elf)
# Create a dummy file to work around CMake requirement of having a source file while adding an
# executable. This is also used by esp_idf_size to detect the target
set(project_elf_src ${CMAKE_BINARY_DIR}/project_elf_src_${IDF_TARGET}.c)
2019-04-26 01:42:10 -04:00
add_custom_command(OUTPUT ${project_elf_src}
COMMAND ${CMAKE_COMMAND} -E touch ${project_elf_src}
VERBATIM)
add_custom_target(_project_elf_src DEPENDS "${project_elf_src}")
add_executable(${project_elf} "${project_elf_src}")
add_dependencies(${project_elf} _project_elf_src)
if(__PROJECT_GROUP_LINK_COMPONENTS)
target_link_libraries(${project_elf} PRIVATE "-Wl,--start-group")
endif()
2019-04-26 01:42:10 -04:00
if(test_components)
target_link_libraries(${project_elf} PRIVATE "-Wl,--whole-archive")
2019-04-26 01:42:10 -04:00
foreach(test_component ${test_components})
if(TARGET ${test_component})
target_link_libraries(${project_elf} PRIVATE ${test_component})
2019-04-26 01:42:10 -04:00
endif()
endforeach()
target_link_libraries(${project_elf} PRIVATE "-Wl,--no-whole-archive")
endif()
idf_build_get_property(build_components BUILD_COMPONENT_ALIASES)
2019-04-26 01:42:10 -04:00
if(test_components)
list(REMOVE_ITEM build_components ${test_components})
endif()
if(CONFIG_IDF_TARGET_LINUX AND CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin")
# Compiling for the host, and the host is macOS, so the linker is Darwin LD.
# Note, when adding support for Clang and LLD based toolchain this check will
# need to be modified.
set(linker_type "Darwin")
else()
set(linker_type "GNU")
endif()
foreach(build_component ${build_components})
__component_get_target(build_component_target ${build_component})
__component_get_property(whole_archive ${build_component_target} WHOLE_ARCHIVE)
if(whole_archive)
if(linker_type STREQUAL "GNU")
message(STATUS "Component ${build_component} will be linked with -Wl,--whole-archive")
target_link_libraries(${project_elf} PRIVATE
"-Wl,--whole-archive"
${build_component}
"-Wl,--no-whole-archive")
elseif(linker_type STREQUAL "Darwin")
message(STATUS "Component ${build_component} will be linked with -Wl,-force_load")
target_link_libraries(${project_elf} PRIVATE
"-Wl,-force_load"
${build_component})
endif()
else()
target_link_libraries(${project_elf} PRIVATE ${build_component})
endif()
endforeach()
if(linker_type STREQUAL "GNU")
set(mapfile "${CMAKE_BINARY_DIR}/${CMAKE_PROJECT_NAME}.map")
2021-10-27 12:14:59 -04:00
set(idf_target "${IDF_TARGET}")
string(TOUPPER ${idf_target} idf_target)
# Add cross-reference table to the map file
target_link_options(${project_elf} PRIVATE "-Wl,--cref")
# Add this symbol as a hint for esp_idf_size to guess the target name
target_link_options(${project_elf} PRIVATE "-Wl,--defsym=IDF_TARGET_${idf_target}=0")
# Enable map file output
target_link_options(${project_elf} PRIVATE "-Wl,--Map=${mapfile}")
# Check if linker supports --no-warn-rwx-segments
execute_process(COMMAND ${CMAKE_LINKER} "--no-warn-rwx-segments" "--version"
RESULT_VARIABLE result
OUTPUT_QUIET
ERROR_QUIET)
if(${result} EQUAL 0)
# Do not print RWX segment warnings
target_link_options(${project_elf} PRIVATE "-Wl,--no-warn-rwx-segments")
endif()
2021-10-27 12:14:59 -04:00
unset(idf_target)
endif()
set_property(DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}" APPEND PROPERTY
ADDITIONAL_CLEAN_FILES
2019-04-26 01:42:10 -04:00
"${mapfile}" "${project_elf_src}")
idf_build_get_property(idf_path IDF_PATH)
idf_build_get_property(python PYTHON)
set(idf_size ${python} -m esp_idf_size)
# Add size targets, depend on map file, run esp_idf_size
# OUTPUT_JSON is passed for compatibility reasons, SIZE_OUTPUT_FORMAT
# environment variable is recommended and has higher priority
add_custom_target(size
COMMAND ${CMAKE_COMMAND}
-D "IDF_SIZE_TOOL=${idf_size}"
-D "MAP_FILE=${mapfile}"
-D "OUTPUT_JSON=${OUTPUT_JSON}"
-P "${idf_path}/tools/cmake/run_size_tool.cmake"
DEPENDS ${mapfile}
USES_TERMINAL
VERBATIM
)
add_custom_target(size-files
COMMAND ${CMAKE_COMMAND}
-D "IDF_SIZE_TOOL=${idf_size}"
-D "IDF_SIZE_MODE=--files"
-D "MAP_FILE=${mapfile}"
-D "OUTPUT_JSON=${OUTPUT_JSON}"
-P "${idf_path}/tools/cmake/run_size_tool.cmake"
DEPENDS ${mapfile}
USES_TERMINAL
VERBATIM
)
add_custom_target(size-components
COMMAND ${CMAKE_COMMAND}
-D "IDF_SIZE_TOOL=${idf_size}"
-D "IDF_SIZE_MODE=--archives"
-D "MAP_FILE=${mapfile}"
-D "OUTPUT_JSON=${OUTPUT_JSON}"
-P "${idf_path}/tools/cmake/run_size_tool.cmake"
DEPENDS ${mapfile}
USES_TERMINAL
VERBATIM
)
unset(idf_size)
# Add DFU build and flash targets
__add_dfu_targets()
# Add UF2 build targets
__add_uf2_targets()
2019-04-26 01:42:10 -04:00
idf_build_executable(${project_elf})
2019-04-26 01:42:10 -04:00
__project_info("${test_components}")
endmacro()