An application on "ESP-Dev-Board" may be upgraded at runtime by downloading a new image via Wi-Fi or Ethernet and flashing it to an OTA partition. The ESP-IDF offers two methods to perform Over The Air (OTA) upgrades:
- Using the native APIs provided by the [`app_update`](../../../components/app_update) component.
- Using simplified APIs provided by the [`esp_https_ota`](../../../components/esp_https_ota) component, which provides functionality to upgrade over HTTPS.
Use of the native API is demonstrated in the `native_ota_example` directory while the API provided by the `esp_https_ota` component is demonstrated under `simple_ota_example` and `advanced_https_ota`.
For information regarding the `esp_https_ota` component, please refer to [ESP HTTPS OTA](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/esp_https_ota.html).
For simplicity, the OTA examples use a pre-defined partition table created by enabling the `CONFIG_PARTITION_TABLE_TWO_OTA` option in menuconfig, which supports three app partitions: `factory`, `OTA_0` and `OTA_1`. Please refer to [Partition Tables](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/partition-tables.html) for more information.
On first boot, the bootloader will load the image contained on the `factory` partition (i.e. the example image). This firmware triggers an OTA upgrade. It will download a new image from an HTTPS server and save it into the `OTA_0` partition. Next, it updates the `ota_data` partition to indicate which app should boot after the next reset. Upon reset, the bootloader reads the contents of the `ota_data` partition to determine which application is selected to run.
"ESP-Dev-Board" is necessary to run the OTA examples. Make sure Ethernet is configured correctly if testing OTA with Ethernet. For further information about setting up Ethernet, please refer to the Ethernet [examples](../../ethernet).
* Set the URL of the firmware to download in the `Firmware Upgrade URL` option. The format should be `https://<host-ip-address>:<host-port>/<firmware-image-filename>`, e.g. `https://192.168.2.106:8070/hello_world.bin`
* **Note:** The server part of this URL (e.g. `192.168.2.106`) must match the **CN** field used when [generating the certificate and key](#run-https-server)
Run `idf.py -p PORT flash monitor` to build and flash the project. This command checks if the partition table contains the `ota_data` partition and restores it to an initial state. This allows the newly loaded app to run from the `factory` partition.
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for all steps required to configure and use the ESP-IDF to build projects.
* Enter the directory containing build artifact/s of project, that will be hosted by HTTPS server, e.g. `cd build`.
* To create a new self-signed certificate and key, run the command `openssl req -x509 -newkey rsa:2048 -keyout ca_key.pem -out ca_cert.pem -days 365 -nodes`.
* When prompted for the `Common Name (CN)`, enter the name of the server that the "ESP-Dev-Board" will connect to. When running this example from a development machine, this is probably the IP address. The HTTPS client will check that the `CN` matches the address given in the HTTPS URL.
* To start the HTTPS server, run the command `openssl s_server -WWW -key ca_key.pem -cert ca_cert.pem -port 8070`.
* This directory should contain the firmware (e.g. `hello_world.bin`) to be used in the update process. This can be any valid ESP-IDF application, as long as its filename corresponds to the name configured using `Firmware Upgrade URL` in menuconfig. The only difference to flashing a firmware via the serial interface is that the binary is flashed to the `factory` partition, while OTA update use one of the OTA partitions.
* **Note:** Make sure incoming access to port *8070* is not prevented by firewall rules.
* **Note:** Windows users may encounter issues while running `openssl s_server -WWW`, due to CR/LF translation and/or closing the connection prematurely
(Some windows builds of openssl translate CR/LF sequences to LF in the served files, leading to corrupted images received by the OTA client; others interpret the `0x1a`/`SUB` character in a binary as an escape sequence, i.e. end of file, and close the connection prematurely thus preventing the OTA client from receiving a complete image).
* We recommend using the `openssl` binary bundled in `Git For Windows` from the [ESP-IDF Tool installer](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/windows-setup.html):
Open the ESP-IDF command prompt and add the internal openssl binary to your path: `set PATH=%LocalAppData%\Git\usr\bin;%PATH%` and run openssl's http server command as above.
* Alternatively, use any windows based openssl with version `v1.1.1i` or greater built on the `Msys-x86_64` platform, or a simple python https server -- see `start_https_server` in the [example_test](simple_ota_example/example_test.py) script.
Finally, copy the generated certificate to the `server_certs` directory contained in the example directory so it can be flashed onto your device along with the firmware, e.g. `cp ca_cert.pem ../server_certs/`.
If you want to rollback to the `factory` app after the upgrade (or to the first OTA partition in case the `factory` partition does not exist), run the command `idf.py erase_otadata`. This restores the `ota_data` partition to its initial state.
This feature allows you to roll back to a previous firmware if new image is not useable. The menuconfig option `CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE` allows you to track the first boot of the application (see the ``Over The Air Updates (OTA)`` article).
The ``native_ota_example`` contains code to demonstrate how a rollback works. To use it, enable the `CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE` option in the `Example Configuration` submenu of menuconfig to set `Number of the GPIO input for diagnostic` to manipulate the rollback process.
The ``native_ota_example`` contains code to demonstrate how to check the version of the application and prevent infinite firmware update loops. Only newer applications are downloaded. Version checking is performed after the first firmware image package containing version data is received. The application version is obtained from one of three places:
In ``native_ota_example``, ``$PROJECT_PATH/version.txt`` is used to define the app version. Change the version in the file to compile the new firmware.
* Check that your PC can ping the "ESP-Dev-Board" using its IP, and that the IP, AP and other configuration settings are correctly configured in menuconfig
* Check if any firewall software is preventing incoming connections on the PC
* Check whether you can see the configured file (default `hello_world.bin`), by running the command `curl -v https://<host-ip-address>:<host-port>/<firmware-image-filename>`
If you see this error, check that the configured (and actual) flash size is large enough for the partitions in the partition table. The default "two OTA slots" partition table requires at least 4MB flash size. To use OTA with smaller flash sizes, create a custom partition table CSV (for details see [Partition Tables](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/partition-tables.html)) and configure it in menuconfig.
Running a local https server might be tricky in some cases (due to self signed certificates, or potential issues with `openssl s_server` on Windows). Here are some suggestions for alternatives:
* Run a plain HTTP server to test the connection. (Note that using a plain http is **not secure** and should only be used for testing)
- Execute `python -m http.server 8070` in the directory with the firmware image
- Use http://<host-ip>:8070/<firmware-name> as the firmware upgrade URL
- Enable *Allow HTTP for OTA* (`CONFIG_OTA_ALLOW_HTTP`) in `Component config -> ESP HTTPS OTA` so the URI without TLS is accepted
* Start the https server using [example_test](simple_ota_example/example_test.py) with two or more parameters: `example_test.py <BIN_DIR> <PORT> [CERT_DIR]`, where:
-`<BIN_DIR>` is a directory containing the image and by default also the certificate and key files:`ca_cert.pem` and `ca_key.pem`
* Publish the firmware image on a public server (e.g. github.com) and copy its root certificate to the `server_certs` directory as `ca_cert.pem`. The certificate can be downloaded using the `s_client` openssl command as shown below:
Please note that URL used here is `raw.githubusercontent.com`. This URL allows raw access to files hosted on github.com repository. Additionally, command above copies last certificate from chain of certs as the CA root cert of server.
---
**NOTE**
For examples using certificate bundle approach (e.g., `simple_ota_example`), it already has most common root certificates and hence there is no need to add any additional certs.
