esp-idf/components/soc/esp32s2/include/soc/spi_pins.h

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#pragma once

#define SPI_FUNC_NUM            0
#define SPI_IOMUX_PIN_NUM_HD    27
#define SPI_IOMUX_PIN_NUM_CS    29
#define SPI_IOMUX_PIN_NUM_MOSI  32
#define SPI_IOMUX_PIN_NUM_CLK   30
#define SPI_IOMUX_PIN_NUM_MISO  31
#define SPI_IOMUX_PIN_NUM_WP    28

// There are 2 sets of GPIO pins which could be routed to FSPICS0, FSPICLK, FSPID, FSPIQ, FSPIHD, FSPIWP.
// However, there is only one set of GPIO pins which could be routed to FSPIIO4, FSPIIO5, FSPIIO6, FSPIIO7.
// As default (when we are not going to use Octal SPI), we make use of SPI2_FUNC_NUM to route one of the 2 sets of GPIO pins to FSPICS0 ~ FSPIWP as follows.
#define SPI2_FUNC_NUM           4
#define SPI2_IOMUX_PIN_NUM_HD   9
#define SPI2_IOMUX_PIN_NUM_CS   10
#define SPI2_IOMUX_PIN_NUM_MOSI 11
#define SPI2_IOMUX_PIN_NUM_CLK  12
#define SPI2_IOMUX_PIN_NUM_MISO 13
#define SPI2_IOMUX_PIN_NUM_WP   14

// When using Octal SPI, we make use of SPI2_FUNC_NUM_OCT to route them as follows.
#define SPI2_FUNC_NUM_OCT           2
#define SPI2_IOMUX_PIN_NUM_HD_OCT   33
#define SPI2_IOMUX_PIN_NUM_CS_OCT   34
#define SPI2_IOMUX_PIN_NUM_MOSI_OCT 35
#define SPI2_IOMUX_PIN_NUM_CLK_OCT  36
#define SPI2_IOMUX_PIN_NUM_MISO_OCT 37
#define SPI2_IOMUX_PIN_NUM_WP_OCT   38
#define SPI2_IOMUX_PIN_NUM_IO4_OCT  10
#define SPI2_IOMUX_PIN_NUM_IO5_OCT  11
#define SPI2_IOMUX_PIN_NUM_IO6_OCT  12
#define SPI2_IOMUX_PIN_NUM_IO7_OCT  13

//SPI3 has no iomux pins

//Following Macros are deprecated. Please use the Macros above
#define FSPI_FUNC_NUM           SPI2_FUNC_NUM
#define FSPI_IOMUX_PIN_NUM_HD   SPI2_IOMUX_PIN_NUM_HD
#define FSPI_IOMUX_PIN_NUM_CS   SPI2_IOMUX_PIN_NUM_CS
#define FSPI_IOMUX_PIN_NUM_MOSI SPI2_IOMUX_PIN_NUM_MOSI
#define FSPI_IOMUX_PIN_NUM_CLK  SPI2_IOMUX_PIN_NUM_CLK
#define FSPI_IOMUX_PIN_NUM_MISO SPI2_IOMUX_PIN_NUM_MISO
#define FSPI_IOMUX_PIN_NUM_WP   SPI2_IOMUX_PIN_NUM_WP