esp-idf/components/soc/esp32s3/CMakeLists.txt

set(srcs
    "adc_periph.c"
    "dedic_gpio_periph.c"
    "gdma_periph.c"
    "gpio_periph.c"
    "sdm_periph.c"
    "i2c_periph.c"
    "i2s_periph.c"
    "interrupts.c"
    "lcd_periph.c"
    "ledc_periph.c"
    "mcpwm_periph.c"
    "pcnt_periph.c"
    "rmt_periph.c"
    "rtc_io_periph.c"
    "sdio_slave_periph.c"
    "sdmmc_periph.c"
    "spi_periph.c"
    "timer_periph.c"
    "touch_sensor_periph.c"
    "temperature_sensor_periph.c"
    "uart_periph.c"
    "usb_periph.c"
    "usb_otg_periph.c")

add_prefix(srcs "${CMAKE_CURRENT_LIST_DIR}/" "${srcs}")

target_sources(${COMPONENT_LIB} PRIVATE "${srcs}")
target_include_directories(${COMPONENT_LIB} PUBLIC . include)
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`set(srcs`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"adc_periph.c"`
			`"dedic_gpio_periph.c"`
gdma: dynamic alloc DMA channels 2020-12-09 07:29:26 -05:00			`"gdma_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"gpio_periph.c"`
sdm: clean up soc/hal/ll code 2022-05-17 01:47:14 -04:00			`"sdm_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"i2c_periph.c"`
			`"i2s_periph.c"`
			`"interrupts.c"`
lcd: add LL driver for esp32-s3 2021-02-26 00:58:04 -05:00			`"lcd_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"ledc_periph.c"`
mcpwm: added peripheral signal description list 2021-02-25 05:55:30 -05:00			`"mcpwm_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"pcnt_periph.c"`
rmt: split TX and RX in LL driver Split TX and RX function in LL driver. Channel number is encoded in driver layer. Added channel signal list in periph.c 2020-10-09 04:41:41 -04:00			`"rmt_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"rtc_io_periph.c"`
			`"sdio_slave_periph.c"`
			`"sdmmc_periph.c"`
			`"spi_periph.c"`
timergroup: move interrupt index into peripheral description file 1. Added timer_group_periph.c file, describing module global signals (e.g. interrupt index) 2. Added more caps in soc_caps.h 2020-10-13 23:46:30 -04:00			`"timer_periph.c"`
soc: descriptive part occupy whole component 2020-09-25 01:57:52 -04:00			`"touch_sensor_periph.c"`
temperature_sensor: Add temperature sensor support for ESP32-C2 2022-06-14 02:50:35 -04:00			`"temperature_sensor_periph.c"`
soc/hal: add tinyusb support esp32s3 add usb hal/soc, usb_ll files and esp32s3 target for usb move usb_hal.h into soc common folder soc/hal: fix soc and periph for usb tinyusb: fix tinyusb io header hal: usb_ll fix pull up/down config for esp32s3 soc/hal: fix peripheral addresses 2021-05-06 04:20:54 -04:00			`"uart_periph.c"`
usb: Add usb_phy driver to support operations on USB PHY 2021-08-19 08:28:28 -04:00			`"usb_periph.c"`
usb: Allow settings of all signals in usb_phy Until now, only usb_phy signals for external PHY were defined. This is now extended with all OTG signals. 2022-10-06 03:04:53 -04:00			`"usb_otg_periph.c")`
soc: separate abstraction, description and implementation 2020-01-07 23:50:03 -05:00
			`add_prefix(srcs "${CMAKE_CURRENT_LIST_DIR}/" "${srcs}")`

			`target_sources(${COMPONENT_LIB} PRIVATE "${srcs}")`
			`target_include_directories(${COMPONENT_LIB} PUBLIC . include)`