esp-idf/components/idf_test/integration_test/TC_IT_TCPIP_UDP.yml

2089 lines
56 KiB
YAML
Raw Normal View History

2017-12-18 06:24:09 -05:00
test cases:
- CI ready: 'Yes'
ID: TCPIP_UDP_0101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C BIND:ERROR
- - SSC SSC1 soc -B -t TCP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip 0.0.0.0 target_udp_port2
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上创建TCP socket3, target_udp_port1
sub module: UDP
summary: STA mode, udp bind test. use different ip, port
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 2/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SOC SOC2 BIND <test_udp_port2> <pc_ip2>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 10
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 10
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip2> -p <test_udp_port2> -l 10
- - P SSC1 RE SEND:(\d+),OK
- P SOC2 UL 10
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上使用步骤3创建的socket1往pc_iptest_tcp_port1上发送10字节数据
5.target1上使用步骤3创建的socket1往pc_ip2test_tcp_port2上发送10字节数据
sub module: UDP
summary: STA mode, sendto test. use different ip, port
test environment: SSC_T1_9
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0103
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472 -n 10 -j 20
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 14720
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没有到UDP包
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
6.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472*10字节数据
sub module: UDP
summary: STA mode, sendto test with different length
2018-04-17 04:28:00 -04:00
test environment: SSC_T1_9
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0103
SDK: ESP32_IDF
Test App: SSC
2018-04-17 04:28:00 -04:00
allow fail: 1/5
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
sub module: UDP
summary: STA mode, sendto test with different length
2018-04-17 04:28:00 -04:00
test environment: SSC_T1_9
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip>
- - P SSC1 NC +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND <test_udp_port2> <pc_ip2>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
7.PC往8266上发送1472字节数据
sub module: UDP
2018-04-17 04:28:00 -04:00
summary: (special case)STA mode, recvfrom basic test with STAM2
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104_02
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND_v6 <test_udp_port1> <pc_ip_v6>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDPv6 -i <target_ip_v6> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip_v6>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip_v6>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip_v6>
- - P SSC1 C +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND_v6 <test_udp_port2> <pc_ip2_v6>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2_v6>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_v6>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2_v6>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)STA mode, recvfrom basic test with STAM2(IPv6)
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104_01_02
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND_v6 <test_udp_port1> <pc_ip_v6>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDPv6 -i <target_ip_v6> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip_v6>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip_v6>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip_v6>
- - P SSC1 C +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND_v6 <test_udp_port2> <pc_ip2_v6>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2_v6>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
initial condition: STAAP2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_v6>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2_v6>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)STA mode, recvfrom basic test with STAAP2(IPv6)
test environment: SSC_T1_9
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0105
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.关闭socket1
sub module: UDP
summary: STA mode, close UDP sockets test
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0106
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port3>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port4>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port5>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.ok
2.ok
3.ok
4.ok
5.ok
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip target_udp_port2
3.target1上UDP传输Bind socket3,本地ip target_udp_port3
4.target1上UDP传输Bind socket4,本地ip target_udp_port4
5.target1上UDP传输Bind socket5,本地ip target_udp_port5
sub module: UDP
summary: STA mode, create max udp socket test
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0107
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(<sock1>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上查询创建socket信息
sub module: UDP
summary: STA mode, UDP get active socket info test
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0108
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C BIND:ERROR
- - SSC SSC1 soc -B -t TCP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip 0.0.0.0 target_udp_port2
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上创建TCP socket3, target_udp_port1
sub module: UDP
summary: AP mode, udp bind test. use different ip, port
test environment: SSC_T1_8
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0109
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC2 ip
- - R SSC2 A <ssc2_ip>:STAIP:(.+)\r\n
- - SSC SSC2 soc -B -t UDP -p <test_udp_port2>
- - R SSC2 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock2> -i <pc_ip_wifi> -p <test_udp_port1> -l 5
- - R SOC1 UL 5
- - SSC SSC1 soc -S -s <sock2> -i <ssc2_ip> -p <test_udp_port2> -l 5
- - R SSC2 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock1>,<target_ap_ip>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: T2O_1
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上使用步骤3创建的socket1往pc_iptest_tcp_port1上发送10字节数据
5.target1上使用步骤3创建的socket1往pc_ip2test_tcp_port2上发送10字节数据
sub module: UDP
2018-04-17 04:28:00 -04:00
summary: (special case)AP mode, sendto test. use different ip, port
test environment: SSC_T2_2
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0110
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472 -n 10
-j 20
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 14720
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
6.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472*10字节数据
sub module: UDP
summary: AP mode, sendto test with different length
test environment: SSC_T1_7
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0110
SDK: ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM C SOC_RECVFROM
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
sub module: UDP
summary: AP mode, sendto test with different length
test environment: SSC_T1_7
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0111
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC2 ip
- - R SSC2 A <ssc2_ip>:STAIP:(.+)\r\n
- - SSC SSC2 soc -B -t UDP -p <test_udp_port2>
- - R SSC2 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 5 <test_udp_port1> <target_ap_ip>
- - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock2>,<pc_ip_wifi>,<test_udp_port1>)
- - SSC SSC2 soc -S -s <sock1> -i <target_ap_ip> -p <test_udp_port1> -l 5
- - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock2>,<ssc2_ip>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
7.OK
initial condition: T2O_1
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
7.PC往8266上发送1472字节数据
sub module: UDP
2018-04-17 04:28:00 -04:00
summary: (special case)AP mode, recvfrom basic test
test environment: SSC_T2_2
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0112
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.关闭socket1
sub module: UDP
summary: AP mode, close UDP sockets test
test environment: SSC_T1_8
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0113
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port3>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port4>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port5>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.ok
2.ok
3.ok
4.ok
5.ok
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip target_udp_port2
3.target1上UDP传输Bind socket3,本地ip target_udp_port3
4.target1上UDP传输Bind socket4,本地ip target_udp_port4
5.target1上UDP传输Bind socket5,本地ip target_udp_port5
sub module: UDP
summary: AP mode, create max udp socket test
test environment: SSC_T1_8
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0114
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(<sock1>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上查询创建socket信息
sub module: UDP
summary: AP mode, UDP get active socket info test
test environment: SSC_T1_8
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1> -w 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC OK
5.PC OK
6.PC OK
7.PC OK
8.PC OK SOC_CLOSE=SOC1
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上关闭工作线程
4.PC往8266上发送1472字节数据
5.PC往8266上发送1472字节数据
6.PC往8266上发送1472字节数据
7.PC往8266上发送1472字节数据
8.PC往8266上发送1472字节数据
sub module: UDP
summary: STA mode, UDP recv buffer test
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: use UDP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_UDP_0202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC OK
5.PC OK
6.PC OK
7.PC OK
8.PC OK SOC_CLOSE=SOC1
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
2018-04-17 04:28:00 -04:00
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_wifi>
2017-12-18 06:24:09 -05:00
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上关闭工作线程
4.PC往8266上发送1472字节数据
5.PC往8266上发送1472字节数据
6.PC往8266上发送1472字节数据
7.PC往8266上发送1472字节数据
8.PC往8266上发送1472字节数据
sub module: UDP
summary: AP mode, UDP recv buffer test
test environment: SSC_T1_7
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: use UDP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_UDP_0301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -i <target_ip> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
4.断开与AP 连接
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
sub module: UDP
summary: do UDP send after WIFI disconnected
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0302
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 2/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
4.断开与AP 连接
5.关闭建立的socket1连接
sub module: UDP
summary: "close UDP socket after WIFI \ndisconnected"
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0303
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
2018-04-17 04:28:00 -04:00
- - SSC SSC1 soc -B -t UDP -i <target_ip> -p <test_udp_port1>
2017-12-18 06:24:09 -05:00
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
2018-04-17 04:28:00 -04:00
- - P SSC1 RE SEND:(\d+),ERROR
2017-12-18 06:24:09 -05:00
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP
mode \n5.8266往PC上发送5字节数据"
sub module: UDP
2018-04-17 04:28:00 -04:00
summary: do UDP send after mode changed
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0304
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP
mode \n5.关闭建立的socket1连接"
sub module: UDP
2018-04-17 04:28:00 -04:00
summary: close UDP socket after mode changed
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0305
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.PC上网卡禁止掉
\n5.关闭建立的socket1连接"
sub module: UDP
summary: close UDP socket after PC NIC disabled
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0306
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.关闭8266的DHCP
1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据"
sub module: UDP
summary: do UDP send after IP changed
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0307
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.关闭8266的DHCP
1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接"
sub module: UDP
summary: close UDP socket after IP changed
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0401
SDK: |-
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C +BIND:ERROR
execution time: 0.0
expected result: |-
1.OK
2.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建UDP socket,bind test_udp_port1
2.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option closed on UDP submodule
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0402
SDK: ESP32_IDF
Test App: SSC_OPTION
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find esp-idf/components/lwip/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to esp-idf/SSC, run "./gen_misc_ng.sh SSC_OPTION" and "make flash", then run the test case normally
3.target1上创建UDP socket,bind test_udp_port1
4.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option opened that build two udp sockets
by binding same port on ESP32
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_0403
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'No'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find ESP8266_RTOS_SDK/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to ESP8266_RTOS_SDK/third_party, run "./make_lib.sh lwip" risc,then continuely run "ll ../lib"
3.switch to ESP8266_RTOS_SDK/SSC, run "./gen_misc_rtos.sh SSC", then run the test case normally
4.target1上创建UDP socket,bind test_udp_port1
5.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option opened that build two udp sockets
by binding same port on 8266_RTOS
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_5001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC, SSC_NonBlocking, SSC_PSRAM
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - duplex = True
- - ''
- - conn_num = 5
- - ''
- - send_delay = 20
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test
test environment: SSC_T2_5
2017-12-18 06:24:09 -05:00
test point 1: stress
test point 2: UDP stress test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_UDP_5002
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPPacketLose
- - test_time = 5
- - dummy
- - send_len = 1460
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP loss rate on DUT Rx
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5003
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPPacketLose
- - test_time = 5
- - dummy
- - send_len = 1460
- - ''
- - pc_send = False
- - ''
- - target_send = True
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP loss rate on DUT Tx
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5004
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPBroadcast
- - test_time = 30
2017-12-18 06:24:09 -05:00
- - dummy
- - send_len = 20
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP broadcase loss rate on DUT Rx
test environment: SSC_T1_6
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
2019-04-01 22:00:12 -04:00
- CI ready: 'No'
ID: TCPIP_UDP_5005
SDK: ESP32_IDF
Test App: SSC, SSC_NonBlocking, SSC_PSRAM
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPMultiSTASendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 5
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 5 sta connect to softap
2. create udp socket on all sta
3. all sta do udp send/recv
sub module: UDP
summary: 1 SoftAP 5 STA, create UDP server on one STA, create UDP client on other
STA, do UDP send/recv
test environment: SSC_T6_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
2017-12-18 06:24:09 -05:00
- CI ready: 'No'
ID: TCPIP_UDP_5005
SDK: |-
8266_NonOS
8266_RTOS
2019-04-01 22:00:12 -04:00
Test App: SSC, SSC_NonBlocking
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPMultiSTASendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 5
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 5 sta connect to softap
2. create udp socket on all sta
3. all sta do udp send/recv
sub module: UDP
summary: 1 SoftAP 5 STA, create UDP server on one STA, create UDP client on other
STA, do UDP send/recv
test environment: SSC_T6_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5006
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSTAMultiSocketSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 2
- - ''
- - conn_number = 6
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 2 sta connect to softap
2. create multi udp socket on all sta
3. all sta do udp send/recv
sub module: UDP
summary: 1 SoftAP 2 STA, create multi UDP socket on STA, do UDP send/recv
2019-04-01 22:00:12 -04:00
test environment: SSC_T3_2
2017-12-18 06:24:09 -05:00
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5007
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/SoftAPSTAUDPLose
- - test_time = 60
- - dummy
- - send_len = 1460
- - ''
- - softap_send = False
- - ''
- - sta_send = True
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1.sta connect to softAP
2.sta softAP bind UPD socket
3.sta send UDP to softAP, softAP calculate the packet lose
sub module: UDP
summary: STA connect to softAP, STA send UDP to softAP, calculate the UDP lose on
softAP
test environment: SSC_T2_5
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5008
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/SoftAPSTAUDPLose
- - test_time = 60
- - dummy
- - send_len = 1460
- - ''
- - softap_send = True
- - ''
- - sta_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1.sta connect to softAP
2.sta softAP bind UPD socket
3.softAP send UDP to STA, STA calculate the packet lose
sub module: UDP
summary: STA connect to softAP, softAP send UDP to STA, calculate the UDP lose on
STA
test environment: SSC_T2_5
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC, SSC_NonBlocking
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Performance
cmd set:
- UDPStress/UDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create UDP and send data for several seconds
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Tx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC, SSC_NonBlocking
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Performance
cmd set:
- UDPStress/UDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create UDP and recv data for several seconds
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Rx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC_Ethernet
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and send packet to PC for several secends
Loop for step 1-2
sub module: UDP
summary: UDP throughput Tx for Ethernet
2019-04-01 22:00:12 -04:00
test environment: SSC_T1_Ethernet
2017-12-18 06:24:09 -05:00
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC_Ethernet
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and PC send packet to DUT for several secends
Loop for step 1-2
sub module: UDP
summary: UDP throughput Rx for Ethernet
2019-04-01 22:00:12 -04:00
test environment: SSC_T1_Ethernet
2017-12-18 06:24:09 -05:00
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
2019-04-01 22:00:12 -04:00
Test App: SSC_Ethernet
2017-12-18 06:24:09 -05:00
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPPacketLose
- - test_time = 30
- - dummy
- - send_len = 1460
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket,PC send packet to DUT for several secends
3. DUT calculate the packet lose rate
sub module: UDP
summary: UDP loss rate on DUT Rx for Eth
2019-04-01 22:00:12 -04:00
test environment: SSC_T1_Ethernet
2017-12-18 06:24:09 -05:00
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5401
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = False
- - ''
- - sta_tx_enable = True
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. bind UDP socket
3. send UDP packet
4. calculate the troughput
sub module: UDP
summary: STA UDP throughput Tx while connected with softAP
2017-12-18 06:24:09 -05:00
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: UDP throughput
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5402
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = True
- - ''
- - sta_tx_enable = False
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. bind UDP socket
3. send UDP packet
4. calculate the troughput
sub module: UDP
summary: STA UDP throughput Rx while connected with softAP
2017-12-18 06:24:09 -05:00
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: UDP throughput
version: v1 (2016-10-18)
2018-04-17 04:28:00 -04:00
- CI ready: 'Yes'
ID: TCPIP_UDP_5501
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - duplex = True
- ['']
- - conn_num = 5
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test with UDPSendRecvIPv6(IPv6)
test environment: SSC_T2_5
test point 1: stress
test point 2: UDP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_5502
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPAPSTASendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - duplex = True
- ['']
- - conn_num = 5
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T3_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test with UDPAPSTASendRecvIPv6(IPv6)
test environment: SSC_T3_1
test point 1: stress
test point 2: UDP stress test(IPv6)
version: v2 (2016-11-15)
2017-12-18 06:24:09 -05:00
- CI ready: 'No'
ID: TCPIP_UDP_9901
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- UDPStress/UDPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Tx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput Compatibility test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_9902
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- UDPStress/UDPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Rx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput Compatibility test
version: v1 (2016-8-15)