esp-idf/examples/protocols/asio/tcp_echo_server/README.md

| Supported Targets | ESP32 | ESP32-S2 | ESP32-S3 | ESP32-C3 |
| ----------------- | ----- | -------- | -------- | -------- |

# Asio TCP echo server example

Simple Asio TCP echo server using WiFi STA or Ethernet.

## Example workflow

- Wi-Fi or Ethernet connection is established, and IP address is obtained.
- Asio TCP server is started on port number defined through the project configuration.
- Server receives and echoes back messages transmitted from client.

## Running the example

- Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
- Set server port number in menuconfig, "Example configuration".
- Run `idf.py -p PORT flash monitor` to build and upload the example to your board and connect to it's serial terminal.
- Wait for the board to connect to WiFi or Ethernet (note the IP address).
- You can now send a TCP message and check it is repeated, for example using netcat `nc IP PORT`.

See the README.md file in the upper level 'examples' directory for more information about examples.
ci: partially enable example build for esp32c2 2022-05-20 05:50:08 -04:00			`\| Supported Targets \| ESP32 \| ESP32-S2 \| ESP32-S3 \| ESP32-C3 \|`
			`\| ----------------- \| ----- \| -------- \| -------- \| -------- \|`

examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`# Asio TCP echo server example`
asio: initial idf port of asio library without ssl 2018-05-29 05:25:24 -04:00
examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`Simple Asio TCP echo server using WiFi STA or Ethernet.`
asio: initial idf port of asio library without ssl 2018-05-29 05:25:24 -04:00
			`## Example workflow`

examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`- Wi-Fi or Ethernet connection is established, and IP address is obtained.`
build system: Use CMake-based build system as default when describing commands 2019-06-22 21:54:31 -04:00			`- Asio TCP server is started on port number defined through the project configuration.`
examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`- Server receives and echoes back messages transmitted from client.`
asio: initial idf port of asio library without ssl 2018-05-29 05:25:24 -04:00
			`## Running the example`

build system: Use CMake-based build system as default when describing commands 2019-06-22 21:54:31 -04:00			- Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`- Set server port number in menuconfig, "Example configuration".`
build system: Use CMake-based build system as default when describing commands 2019-06-22 21:54:31 -04:00			- Run `idf.py -p PORT flash monitor` to build and upload the example to your board and connect to it's serial terminal.
examples/protocols/asio: use common network component 2018-11-20 11:44:31 -05:00			`- Wait for the board to connect to WiFi or Ethernet (note the IP address).`
			- You can now send a TCP message and check it is repeated, for example using netcat `nc IP PORT`.
asio: initial idf port of asio library without ssl 2018-05-29 05:25:24 -04:00
			`See the README.md file in the upper level 'examples' directory for more information about examples.`