esp-idf/tools/unit-test-app/sdkconfig.defaults

CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=n
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_app.csv"
CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_app.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32_XTAL_FREQ_AUTO=y
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=3
CONFIG_FREERTOS_USE_TRACE_FACILITY=y
CONFIG_HEAP_POISONING_COMPREHENSIVE=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_SPI_FLASH_ENABLE_COUNTERS=y
CONFIG_ESP32_ULP_COPROC_ENABLED=y
CONFIG_ESP_TASK_WDT=n
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS=y
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=7
CONFIG_COMPILER_STACK_CHECK_MODE_STRONG=y
CONFIG_COMPILER_STACK_CHECK=y
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
CONFIG_ESP_TIMER_PROFILING=y
CONFIG_ADC_DISABLE_DAC=n
CONFIG_COMPILER_WARN_WRITE_STRINGS=y
CONFIG_SPI_MASTER_IN_IRAM=y
CONFIG_EFUSE_VIRTUAL=y
CONFIG_SPIRAM_BANKSWITCH_ENABLE=n
CONFIG_FATFS_ALLOC_EXTRAM_FIRST=y
Rename Kconfig options (components/bootloader) 2019-05-09 14:10:35 +02:00			`CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y`
unit-test-app: new targets for building different configurations 2017-09-13 01:40:54 +08:00			`CONFIG_ESPTOOLPY_BAUD_921600B=y`
unit test app: Require 4MB flash PSRAM config unit tests had outgrown the 0x14000 byte allocated factory size. 2018-05-25 12:16:26 +10:00			`CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y`
unit-test-app: new targets for building different configurations 2017-09-13 01:40:54 +08:00			`CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=n`
			`CONFIG_PARTITION_TABLE_CUSTOM=y`
			`CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partition_table_unit_test_app.csv"`
			`CONFIG_PARTITION_TABLE_FILENAME="partition_table_unit_test_app.csv"`
app_update: Add unit tt pests for ota, factory, test partitions 2018-06-15 16:08:44 +05:00			`CONFIG_PARTITION_TABLE_OFFSET=0x8000`
unit-test-app: new targets for building different configurations 2017-09-13 01:40:54 +08:00			`CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y`
			`CONFIG_ESP32_XTAL_FREQ_AUTO=y`
			`CONFIG_FREERTOS_HZ=1000`
			`CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y`
			`CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=3`
freertos/make trace facility configurable This commit makes configUSE_TRACE_FACILITY and configUSE_STATS_FORMATTING_FUNCTIONS configurable in kconfig. Test cases fro the functions enabled by the two configurations above have also been added. Test cases for the following functions have been added... - uxTaskGetSystemState() - uxTaskGetTaskNumber() - vTaskSetTaskNumber() - xEventGroupClearBitsFromISR() - xEventGroupSetBitsFromISR() - uxEventGroupGetNumber() - uxQueueGetQueueNumber() - vQueueSetQueueNumber() - ucQueueGetQueueType() Test cases for the following functions were not required... - prvListTaskWithinSingleList() - prvWriteNameToBuffer() - vTaskList() 2017-09-28 12:33:53 +08:00			`CONFIG_FREERTOS_USE_TRACE_FACILITY=y`
unit-test-app: new targets for building different configurations 2017-09-13 01:40:54 +08:00			`CONFIG_HEAP_POISONING_COMPREHENSIVE=y`
			`CONFIG_MBEDTLS_HARDWARE_MPI=y`
			`CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y`
			`CONFIG_MBEDTLS_HARDWARE_SHA=y`
			`CONFIG_SPI_FLASH_ENABLE_COUNTERS=y`
Rename Kconfig options (components/esp32) 2019-04-30 12:51:55 +02:00			`CONFIG_ESP32_ULP_COPROC_ENABLED=y`
			`CONFIG_ESP_TASK_WDT=n`
spi_flash: Abort on writes to dangerous regions (bootloader, partition table, app) Can be disabled or made into a failure result in kconfig if needed. 2017-10-25 15:22:30 +08:00			`CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS=y`
FreeRTOS/make Queue Registry and Run Time Stats configurable This commit makes the configQUEUE_REGISTRY_SIZE and configGENERATE_RUN_TIME_STATS configurable in menuconfig. - configQUEUE_REGISTRY_SIZE can now be set in menuconfig. - The functions vQueueAddToRegistry() and vQueueUnregisterQueue() were made SMP compatbile - pcQueueGetName() was backported from FreeRTOS v9.0.0 - Added test case for Queue Registry functions - configGENERATE_RUN_TIME_STATS can now be enabled in menuconfig. CCOUNT or esp_timer can be selected as the FreeRTOS run time clock in menuconfig as well, although CCOUNT will overflow quickly. - Run time stats collection (in vTaskSwitchContext) and generation (in uxTaskGetSystemState) have been made SMP compatible. Therefore vTaskGetRunTimeStats() now displays the run time usage of each task as a percentage of total runtime of both CPUs Squash 2017-10-30 16:03:56 +08:00			`CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=7`
Rename Kconfig options (root) 2019-04-24 15:02:25 +02:00			`CONFIG_COMPILER_STACK_CHECK_MODE_STRONG=y`
			`CONFIG_COMPILER_STACK_CHECK=y`
Rename Kconfig options (components/freertos) 2019-04-26 18:12:35 +02:00			`CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y`
esp_timer: add documentation, expose profiling option in Kconfig 2017-11-24 18:51:37 +08:00			`CONFIG_ESP_TIMER_PROFILING=y`
Rename Kconfig options (components/driver) 2019-04-29 14:22:57 +02:00			`CONFIG_ADC_DISABLE_DAC=n`
Rename Kconfig options (root) 2019-04-24 15:02:25 +02:00			`CONFIG_COMPILER_WARN_WRITE_STRINGS=y`
unit-test-app: keep CONFIG_SPIRAM_BANKSWITCH_ENABLE enabled only for psram_8m config 2018-11-19 22:22:24 +05:30			`CONFIG_SPI_MASTER_IN_IRAM=y`
build_system: Add support efuse 2018-11-19 11:45:21 +08:00			`CONFIG_EFUSE_VIRTUAL=y`
unit-test-app: keep CONFIG_SPIRAM_BANKSWITCH_ENABLE enabled only for psram_8m config 2018-11-19 22:22:24 +05:30			`CONFIG_SPIRAM_BANKSWITCH_ENABLE=n`
fatfs: add option to prefer ext. RAM for internal buffers 2018-11-29 01:08:59 +08:00			`CONFIG_FATFS_ALLOC_EXTRAM_FIRST=y`