mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1965 lines
74 KiB
C
1965 lines
74 KiB
C
|
/**
|
||
|
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
||
|
*
|
||
|
* SPDX-License-Identifier: Apache-2.0
|
||
|
*/
|
||
|
#pragma once
|
||
|
|
||
|
#include <stdint.h>
|
||
|
#ifdef __cplusplus
|
||
|
extern "C" {
|
||
|
#endif
|
||
|
|
||
|
/** Group: out */
|
||
|
/** Type of out_conf0_chn register
|
||
|
* Configures the tx direction of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_auto_wrback_chn : R/W; bitpos: [0]; default: 0;
|
||
|
* Set this bit to enable automatic outlink-writeback when all the data pointed by
|
||
|
* outlink descriptor has been received.
|
||
|
*/
|
||
|
uint32_t out_auto_wrback_chn:1;
|
||
|
/** out_eof_mode_chn : R/W; bitpos: [1]; default: 1;
|
||
|
* EOF flag generation mode when receiving data. 1: EOF flag for Tx channel 0 is
|
||
|
* generated when data need to read has been popped from FIFO in DMA
|
||
|
*/
|
||
|
uint32_t out_eof_mode_chn:1;
|
||
|
/** outdscr_burst_en_chn : R/W; bitpos: [2]; default: 0;
|
||
|
* Set this bit to 1 to enable INCR burst transfer for Tx channel 0 reading link
|
||
|
* descriptor when accessing internal SRAM.
|
||
|
*/
|
||
|
uint32_t outdscr_burst_en_chn:1;
|
||
|
/** out_ecc_aes_en_chn : R/W; bitpos: [3]; default: 0;
|
||
|
* When access address space is ecc/aes area, this bit should be set to 1. In this
|
||
|
* case, the start address of square should be 16-bit aligned. The width of square
|
||
|
* multiply byte number of one pixel should be 16-bit aligned.
|
||
|
*/
|
||
|
uint32_t out_ecc_aes_en_chn:1;
|
||
|
/** out_check_owner_chn : R/W; bitpos: [4]; default: 0;
|
||
|
* Set this bit to enable checking the owner attribute of the link descriptor.
|
||
|
*/
|
||
|
uint32_t out_check_owner_chn:1;
|
||
|
/** out_loop_test_chn : R/W; bitpos: [5]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_loop_test_chn:1;
|
||
|
/** out_mem_burst_length_chn : R/W; bitpos: [8:6]; default: 0;
|
||
|
* Block size of Tx channel 0. 0: single 1: 16 bytes 2: 32 bytes 3: 64
|
||
|
* bytes 4: 128 bytes
|
||
|
*/
|
||
|
uint32_t out_mem_burst_length_chn:3;
|
||
|
/** out_macro_block_size_chn : R/W; bitpos: [10:9]; default: 0;
|
||
|
* Sel TX macro-block size 0: 8pixel*8pixel 1: 8pixel*16pixel 2:
|
||
|
* 16pixel*16pixel 3: no macro-block , only useful in mode 1 of the link
|
||
|
* descriptor
|
||
|
*/
|
||
|
uint32_t out_macro_block_size_chn:2;
|
||
|
/** out_dscr_port_en_chn : R/W; bitpos: [11]; default: 0;
|
||
|
* Set this bit to 1 to obtain descriptor from IP port
|
||
|
*/
|
||
|
uint32_t out_dscr_port_en_chn:1;
|
||
|
/** out_page_bound_en_chn : R/W; bitpos: [12]; default: 0;
|
||
|
* Set this bit to 1 to make sure AXI read data don't cross the address boundary which
|
||
|
* define by mem_burst_length
|
||
|
*/
|
||
|
uint32_t out_page_bound_en_chn:1;
|
||
|
uint32_t reserved_13:3;
|
||
|
/** out_reorder_en_chn : R/W; bitpos: [16]; default: 0;
|
||
|
* Enable TX channel 0 macro block reorder when set to 1, only channel0 have this
|
||
|
* selection
|
||
|
*/
|
||
|
uint32_t out_reorder_en_chn:1;
|
||
|
uint32_t reserved_17:7;
|
||
|
/** out_rst_chn : R/W; bitpos: [24]; default: 0;
|
||
|
* Write 1 then write 0 to this bit to reset TX channel
|
||
|
*/
|
||
|
uint32_t out_rst_chn:1;
|
||
|
/** out_cmd_disable_chn : R/W; bitpos: [25]; default: 0;
|
||
|
* Write 1 before reset and write 0 after reset
|
||
|
*/
|
||
|
uint32_t out_cmd_disable_chn:1;
|
||
|
/** out_arb_weight_opt_dis_chn : R/W; bitpos: [26]; default: 0;
|
||
|
* Set this bit to 1 to disable arbiter optimum weight function.
|
||
|
*/
|
||
|
uint32_t out_arb_weight_opt_dis_chn:1;
|
||
|
uint32_t reserved_27:5;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_conf0_chn_reg_t;
|
||
|
|
||
|
/** Type of out_int_raw_chn register
|
||
|
* Raw interrupt status of TX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_done_chn_int_raw : R/WTC/SS; bitpos: [0]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last data pointed by one outlink
|
||
|
* descriptor has been transmitted to peripherals for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t out_done_chn_int_raw:1;
|
||
|
/** out_eof_chn_int_raw : R/WTC/SS; bitpos: [1]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last data pointed by one outlink
|
||
|
* descriptor has been read from memory for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t out_eof_chn_int_raw:1;
|
||
|
/** out_dscr_err_chn_int_raw : R/WTC/SS; bitpos: [2]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when detecting outlink descriptor error,
|
||
|
* including owner error, the second and third word error of outlink descriptor for Tx
|
||
|
* channel 0.
|
||
|
*/
|
||
|
uint32_t out_dscr_err_chn_int_raw:1;
|
||
|
/** out_total_eof_chn_int_raw : R/WTC/SS; bitpos: [3]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when data corresponding a outlink
|
||
|
* (includes one link descriptor or few link descriptors) is transmitted out for Tx
|
||
|
* channel 0.
|
||
|
*/
|
||
|
uint32_t out_total_eof_chn_int_raw:1;
|
||
|
/** outfifo_ovf_l1_chn_int_raw : R/WTC/SS; bitpos: [4]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is overflow.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l1_chn_int_raw:1;
|
||
|
/** outfifo_udf_l1_chn_int_raw : R/WTC/SS; bitpos: [5]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is underflow.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l1_chn_int_raw:1;
|
||
|
/** outfifo_ovf_l2_chn_int_raw : R/WTC/SS; bitpos: [6]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is overflow.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l2_chn_int_raw:1;
|
||
|
/** outfifo_udf_l2_chn_int_raw : R/WTC/SS; bitpos: [7]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is underflow.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l2_chn_int_raw:1;
|
||
|
/** outfifo_ovf_l3_chn_int_raw : R/WTC/SS; bitpos: [8]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is overflow.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l3_chn_int_raw:1;
|
||
|
/** outfifo_udf_l3_chn_int_raw : R/WTC/SS; bitpos: [9]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo is underflow.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l3_chn_int_raw:1;
|
||
|
/** outfifo_ro_ovf_chn_int_raw : R/WTC/SS; bitpos: [10]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when reorder fifo is overflow.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_ovf_chn_int_raw:1;
|
||
|
/** outfifo_ro_udf_chn_int_raw : R/WTC/SS; bitpos: [11]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when reorder fifo is underflow.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_udf_chn_int_raw:1;
|
||
|
/** out_dscr_task_ovf_chn_int_raw : R/WTC/SS; bitpos: [12]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when dscr ready task fifo is overflow.
|
||
|
*/
|
||
|
uint32_t out_dscr_task_ovf_chn_int_raw:1;
|
||
|
uint32_t reserved_13:19;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_int_raw_chn_reg_t;
|
||
|
|
||
|
/** Type of out_int_ena_chn register
|
||
|
* Interrupt enable bits of TX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_done_chn_int_ena : R/W; bitpos: [0]; default: 0;
|
||
|
* The interrupt enable bit for the OUT_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_done_chn_int_ena:1;
|
||
|
/** out_eof_chn_int_ena : R/W; bitpos: [1]; default: 0;
|
||
|
* The interrupt enable bit for the OUT_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_eof_chn_int_ena:1;
|
||
|
/** out_dscr_err_chn_int_ena : R/W; bitpos: [2]; default: 0;
|
||
|
* The interrupt enable bit for the OUT_DSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_err_chn_int_ena:1;
|
||
|
/** out_total_eof_chn_int_ena : R/W; bitpos: [3]; default: 0;
|
||
|
* The interrupt enable bit for the OUT_TOTAL_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_total_eof_chn_int_ena:1;
|
||
|
/** outfifo_ovf_l1_chn_int_ena : R/W; bitpos: [4]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l1_chn_int_ena:1;
|
||
|
/** outfifo_udf_l1_chn_int_ena : R/W; bitpos: [5]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l1_chn_int_ena:1;
|
||
|
/** outfifo_ovf_l2_chn_int_ena : R/W; bitpos: [6]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l2_chn_int_ena:1;
|
||
|
/** outfifo_udf_l2_chn_int_ena : R/W; bitpos: [7]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l2_chn_int_ena:1;
|
||
|
/** outfifo_ovf_l3_chn_int_ena : R/W; bitpos: [8]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l3_chn_int_ena:1;
|
||
|
/** outfifo_udf_l3_chn_int_ena : R/W; bitpos: [9]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l3_chn_int_ena:1;
|
||
|
/** outfifo_ro_ovf_chn_int_ena : R/W; bitpos: [10]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_ovf_chn_int_ena:1;
|
||
|
/** outfifo_ro_udf_chn_int_ena : R/W; bitpos: [11]; default: 0;
|
||
|
* The interrupt enable bit for the OUTFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_udf_chn_int_ena:1;
|
||
|
/** out_dscr_task_ovf_chn_int_ena : R/W; bitpos: [12]; default: 0;
|
||
|
* The interrupt enable bit for the OUT_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_task_ovf_chn_int_ena:1;
|
||
|
uint32_t reserved_13:19;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_int_ena_chn_reg_t;
|
||
|
|
||
|
/** Type of out_int_st_chn register
|
||
|
* Masked interrupt status of TX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_done_chn_int_st : RO; bitpos: [0]; default: 0;
|
||
|
* The raw interrupt status bit for the OUT_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_done_chn_int_st:1;
|
||
|
/** out_eof_chn_int_st : RO; bitpos: [1]; default: 0;
|
||
|
* The raw interrupt status bit for the OUT_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_eof_chn_int_st:1;
|
||
|
/** out_dscr_err_chn_int_st : RO; bitpos: [2]; default: 0;
|
||
|
* The raw interrupt status bit for the OUT_DSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_err_chn_int_st:1;
|
||
|
/** out_total_eof_chn_int_st : RO; bitpos: [3]; default: 0;
|
||
|
* The raw interrupt status bit for the OUT_TOTAL_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_total_eof_chn_int_st:1;
|
||
|
/** outfifo_ovf_l1_chn_int_st : RO; bitpos: [4]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l1_chn_int_st:1;
|
||
|
/** outfifo_udf_l1_chn_int_st : RO; bitpos: [5]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l1_chn_int_st:1;
|
||
|
/** outfifo_ovf_l2_chn_int_st : RO; bitpos: [6]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l2_chn_int_st:1;
|
||
|
/** outfifo_udf_l2_chn_int_st : RO; bitpos: [7]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l2_chn_int_st:1;
|
||
|
/** outfifo_ovf_l3_chn_int_st : RO; bitpos: [8]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l3_chn_int_st:1;
|
||
|
/** outfifo_udf_l3_chn_int_st : RO; bitpos: [9]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l3_chn_int_st:1;
|
||
|
/** outfifo_ro_ovf_chn_int_st : RO; bitpos: [10]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_ovf_chn_int_st:1;
|
||
|
/** outfifo_ro_udf_chn_int_st : RO; bitpos: [11]; default: 0;
|
||
|
* The raw interrupt status bit for the OUTFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_udf_chn_int_st:1;
|
||
|
/** out_dscr_task_ovf_chn_int_st : RO; bitpos: [12]; default: 0;
|
||
|
* The raw interrupt status bit for the OUT_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_task_ovf_chn_int_st:1;
|
||
|
uint32_t reserved_13:19;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_int_st_chn_reg_t;
|
||
|
|
||
|
/** Type of out_int_clr_chn register
|
||
|
* Interrupt clear bits of TX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_done_chn_int_clr : WT; bitpos: [0]; default: 0;
|
||
|
* Set this bit to clear the OUT_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_done_chn_int_clr:1;
|
||
|
/** out_eof_chn_int_clr : WT; bitpos: [1]; default: 0;
|
||
|
* Set this bit to clear the OUT_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_eof_chn_int_clr:1;
|
||
|
/** out_dscr_err_chn_int_clr : WT; bitpos: [2]; default: 0;
|
||
|
* Set this bit to clear the OUT_DSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_err_chn_int_clr:1;
|
||
|
/** out_total_eof_chn_int_clr : WT; bitpos: [3]; default: 0;
|
||
|
* Set this bit to clear the OUT_TOTAL_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_total_eof_chn_int_clr:1;
|
||
|
/** outfifo_ovf_l1_chn_int_clr : WT; bitpos: [4]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l1_chn_int_clr:1;
|
||
|
/** outfifo_udf_l1_chn_int_clr : WT; bitpos: [5]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l1_chn_int_clr:1;
|
||
|
/** outfifo_ovf_l2_chn_int_clr : WT; bitpos: [6]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l2_chn_int_clr:1;
|
||
|
/** outfifo_udf_l2_chn_int_clr : WT; bitpos: [7]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l2_chn_int_clr:1;
|
||
|
/** outfifo_ovf_l3_chn_int_clr : WT; bitpos: [8]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ovf_l3_chn_int_clr:1;
|
||
|
/** outfifo_udf_l3_chn_int_clr : WT; bitpos: [9]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_udf_l3_chn_int_clr:1;
|
||
|
/** outfifo_ro_ovf_chn_int_clr : WT; bitpos: [10]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_ovf_chn_int_clr:1;
|
||
|
/** outfifo_ro_udf_chn_int_clr : WT; bitpos: [11]; default: 0;
|
||
|
* Set this bit to clear the OUTFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_udf_chn_int_clr:1;
|
||
|
/** out_dscr_task_ovf_chn_int_clr : WT; bitpos: [12]; default: 0;
|
||
|
* Set this bit to clear the OUT_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t out_dscr_task_ovf_chn_int_clr:1;
|
||
|
uint32_t reserved_13:19;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_int_clr_chn_reg_t;
|
||
|
|
||
|
/** Type of outfifo_status_chn register
|
||
|
* Represents the status of the tx fifo of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outfifo_full_l2_chn : RO; bitpos: [0]; default: 0;
|
||
|
* Tx FIFO full signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_full_l2_chn:1;
|
||
|
/** outfifo_empty_l2_chn : RO; bitpos: [1]; default: 1;
|
||
|
* Tx FIFO empty signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_empty_l2_chn:1;
|
||
|
/** outfifo_cnt_l2_chn : RO; bitpos: [5:2]; default: 0;
|
||
|
* The register stores the byte number of the data in Tx FIFO for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_cnt_l2_chn:4;
|
||
|
uint32_t reserved_6:1;
|
||
|
/** out_remain_under_1b_chn : RO; bitpos: [7]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_1b_chn:1;
|
||
|
/** out_remain_under_2b_chn : RO; bitpos: [8]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_2b_chn:1;
|
||
|
/** out_remain_under_3b_chn : RO; bitpos: [9]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_3b_chn:1;
|
||
|
/** out_remain_under_4b_chn : RO; bitpos: [10]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_4b_chn:1;
|
||
|
/** out_remain_under_5b_chn : RO; bitpos: [11]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_5b_chn:1;
|
||
|
/** out_remain_under_6b_chn : RO; bitpos: [12]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_6b_chn:1;
|
||
|
/** out_remain_under_7b_chn : RO; bitpos: [13]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_7b_chn:1;
|
||
|
/** out_remain_under_8b_chn : RO; bitpos: [14]; default: 1;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_remain_under_8b_chn:1;
|
||
|
/** outfifo_full_l1_chn : RO; bitpos: [15]; default: 0;
|
||
|
* Tx FIFO full signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_full_l1_chn:1;
|
||
|
/** outfifo_empty_l1_chn : RO; bitpos: [16]; default: 1;
|
||
|
* Tx FIFO empty signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_empty_l1_chn:1;
|
||
|
/** outfifo_cnt_l1_chn : RO; bitpos: [21:17]; default: 0;
|
||
|
* The register stores the byte number of the data in Tx FIFO for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_cnt_l1_chn:5;
|
||
|
/** outfifo_full_l3_chn : RO; bitpos: [22]; default: 0;
|
||
|
* Tx FIFO full signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_full_l3_chn:1;
|
||
|
/** outfifo_empty_l3_chn : RO; bitpos: [23]; default: 1;
|
||
|
* Tx FIFO empty signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_empty_l3_chn:1;
|
||
|
/** outfifo_cnt_l3_chn : RO; bitpos: [28:24]; default: 0;
|
||
|
* The register stores the byte number of the data in Tx FIFO for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_cnt_l3_chn:5;
|
||
|
uint32_t reserved_29:3;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_outfifo_status_chn_reg_t;
|
||
|
|
||
|
/** Type of out_push_chn register
|
||
|
* Configures the tx fifo of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outfifo_wdata_chn : R/W; bitpos: [9:0]; default: 0;
|
||
|
* This register stores the data that need to be pushed into DMA Tx FIFO.
|
||
|
*/
|
||
|
uint32_t outfifo_wdata_chn:10;
|
||
|
/** outfifo_push_chn : R/W/SC; bitpos: [10]; default: 0;
|
||
|
* Set this bit to push data into DMA Tx FIFO.
|
||
|
*/
|
||
|
uint32_t outfifo_push_chn:1;
|
||
|
uint32_t reserved_11:21;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_push_chn_reg_t;
|
||
|
|
||
|
/** Type of out_link_conf_chn register
|
||
|
* Configures the tx descriptor operations of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
uint32_t reserved_0:20;
|
||
|
/** outlink_stop_chn : R/W/SC; bitpos: [20]; default: 0;
|
||
|
* Set this bit to stop dealing with the outlink descriptors.
|
||
|
*/
|
||
|
uint32_t outlink_stop_chn:1;
|
||
|
/** outlink_start_chn : R/W/SC; bitpos: [21]; default: 0;
|
||
|
* Set this bit to start dealing with the outlink descriptors.
|
||
|
*/
|
||
|
uint32_t outlink_start_chn:1;
|
||
|
/** outlink_restart_chn : R/W/SC; bitpos: [22]; default: 0;
|
||
|
* Set this bit to restart a new outlink from the last address.
|
||
|
*/
|
||
|
uint32_t outlink_restart_chn:1;
|
||
|
/** outlink_park_chn : RO; bitpos: [23]; default: 1;
|
||
|
* 1: the outlink descriptor's FSM is in idle state. 0: the outlink descriptor's FSM
|
||
|
* is working.
|
||
|
*/
|
||
|
uint32_t outlink_park_chn:1;
|
||
|
uint32_t reserved_24:8;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_link_conf_chn_reg_t;
|
||
|
|
||
|
/** Type of out_link_addr_chn register
|
||
|
* Configures the tx descriptor address of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outlink_addr_chn : R/W; bitpos: [31:0]; default: 0;
|
||
|
* This register stores the first outlink descriptor's address.
|
||
|
*/
|
||
|
uint32_t outlink_addr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_link_addr_chn_reg_t;
|
||
|
|
||
|
/** Type of out_state_chn register
|
||
|
* Represents the working status of the tx descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outlink_dscr_addr_chn : RO; bitpos: [17:0]; default: 0;
|
||
|
* This register stores the current outlink descriptor's address.
|
||
|
*/
|
||
|
uint32_t outlink_dscr_addr_chn:18;
|
||
|
/** out_dscr_state_chn : RO; bitpos: [19:18]; default: 0;
|
||
|
* This register stores the current descriptor state machine state.
|
||
|
*/
|
||
|
uint32_t out_dscr_state_chn:2;
|
||
|
/** out_state_chn : RO; bitpos: [23:20]; default: 0;
|
||
|
* This register stores the current control module state machine state.
|
||
|
*/
|
||
|
uint32_t out_state_chn:4;
|
||
|
/** out_reset_avail_chn : RO; bitpos: [24]; default: 1;
|
||
|
* This register indicate that if the channel reset is safety.
|
||
|
*/
|
||
|
uint32_t out_reset_avail_chn:1;
|
||
|
uint32_t reserved_25:7;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_state_chn_reg_t;
|
||
|
|
||
|
/** Type of out_eof_des_addr_chn register
|
||
|
* Represents the address associated with the outlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_eof_des_addr_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* This register stores the address of the outlink descriptor when the EOF bit in this
|
||
|
* descriptor is 1.
|
||
|
*/
|
||
|
uint32_t out_eof_des_addr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_eof_des_addr_chn_reg_t;
|
||
|
|
||
|
/** Type of out_dscr_chn register
|
||
|
* Represents the address associated with the outlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outlink_dscr_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the next outlink descriptor address y.
|
||
|
*/
|
||
|
uint32_t outlink_dscr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_dscr_chn_reg_t;
|
||
|
|
||
|
/** Type of out_dscr_bf0_chn register
|
||
|
* Represents the address associated with the outlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outlink_dscr_bf0_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the last outlink descriptor's next address y-1.
|
||
|
*/
|
||
|
uint32_t outlink_dscr_bf0_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_dscr_bf0_chn_reg_t;
|
||
|
|
||
|
/** Type of out_dscr_bf1_chn register
|
||
|
* Represents the address associated with the outlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outlink_dscr_bf1_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the second-to-last outlink descriptor's next address y-2.
|
||
|
*/
|
||
|
uint32_t outlink_dscr_bf1_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_dscr_bf1_chn_reg_t;
|
||
|
|
||
|
/** Type of out_peri_sel_chn register
|
||
|
* Configures the tx peripheral of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_peri_sel_chn : R/W; bitpos: [2:0]; default: 7;
|
||
|
* This register is used to select peripheral for Tx channel 0: jpeg 1:
|
||
|
* display-1 2: display-2 3: display-3 7: no choose
|
||
|
*/
|
||
|
uint32_t out_peri_sel_chn:3;
|
||
|
uint32_t reserved_3:29;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_peri_sel_chn_reg_t;
|
||
|
|
||
|
/** Type of out_arb_chn register
|
||
|
* Configures the tx arbiter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_arb_token_num_chn : R/W; bitpos: [3:0]; default: 1;
|
||
|
* Set the max number of token count of arbiter
|
||
|
*/
|
||
|
uint32_t out_arb_token_num_chn:4;
|
||
|
/** out_arb_priority_chn : R/W; bitpos: [5:4]; default: 1;
|
||
|
* Set the priority of channel
|
||
|
*/
|
||
|
uint32_t out_arb_priority_chn:2;
|
||
|
uint32_t reserved_6:26;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_arb_chn_reg_t;
|
||
|
|
||
|
/** Type of out_ro_status_chn register
|
||
|
* Represents the status of the tx reorder module of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** outfifo_ro_cnt_chn : RO; bitpos: [5:0]; default: 0;
|
||
|
* The register stores the byte number of the data in color convert Tx FIFO for
|
||
|
* channel 0.
|
||
|
*/
|
||
|
uint32_t outfifo_ro_cnt_chn:6;
|
||
|
/** out_ro_wr_state_chn : RO; bitpos: [7:6]; default: 0;
|
||
|
* The register stores the state of read ram of reorder
|
||
|
*/
|
||
|
uint32_t out_ro_wr_state_chn:2;
|
||
|
/** out_ro_rd_state_chn : RO; bitpos: [9:8]; default: 0;
|
||
|
* The register stores the state of write ram of reorder
|
||
|
*/
|
||
|
uint32_t out_ro_rd_state_chn:2;
|
||
|
/** out_pixel_byte_chn : RO; bitpos: [13:10]; default: 0;
|
||
|
* the number of bytes contained in a pixel at TX channel 0: 1byte 1: 1.5bytes
|
||
|
* 2 : 2bytes 3: 2.5bytes 4: 3bytes 5: 4bytes
|
||
|
*/
|
||
|
uint32_t out_pixel_byte_chn:4;
|
||
|
/** out_burst_block_num_chn : RO; bitpos: [17:14]; default: 0;
|
||
|
* the number of macro blocks contained in a burst of data at TX channel
|
||
|
*/
|
||
|
uint32_t out_burst_block_num_chn:4;
|
||
|
uint32_t reserved_18:14;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_ro_status_chn_reg_t;
|
||
|
|
||
|
/** Type of out_ro_pd_conf_chn register
|
||
|
* Configures the tx reorder memory of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
uint32_t reserved_0:4;
|
||
|
/** out_ro_ram_force_pd_chn : R/W; bitpos: [4]; default: 0;
|
||
|
* dma reorder ram power down
|
||
|
*/
|
||
|
uint32_t out_ro_ram_force_pd_chn:1;
|
||
|
/** out_ro_ram_force_pu_chn : R/W; bitpos: [5]; default: 1;
|
||
|
* dma reorder ram power up
|
||
|
*/
|
||
|
uint32_t out_ro_ram_force_pu_chn:1;
|
||
|
/** out_ro_ram_clk_fo_chn : R/W; bitpos: [6]; default: 0;
|
||
|
* 1: Force to open the clock and bypass the gate-clock when accessing the RAM in DMA.
|
||
|
* 0: A gate-clock will be used when accessing the RAM in DMA.
|
||
|
*/
|
||
|
uint32_t out_ro_ram_clk_fo_chn:1;
|
||
|
uint32_t reserved_7:25;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_ro_pd_conf_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_convert_chn register
|
||
|
* Configures the tx color convert of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_output_sel_chn : R/W; bitpos: [1:0]; default: 0;
|
||
|
* Set final color convert process and output type 0: RGB888 to RGB565 1:
|
||
|
* YUV444 to YUV422 2: output directly
|
||
|
*/
|
||
|
uint32_t out_color_output_sel_chn:2;
|
||
|
/** out_color_3b_proc_en_chn : R/W; bitpos: [2]; default: 0;
|
||
|
* Enable generic color convert modlue between color input & color output, need to
|
||
|
* configure parameter.
|
||
|
*/
|
||
|
uint32_t out_color_3b_proc_en_chn:1;
|
||
|
/** out_color_input_sel_chn : R/W; bitpos: [5:3]; default: 7;
|
||
|
* Set first color convert process and input color type 0: RGB565 to RGB888 1:
|
||
|
* YUV422 to YUV444 2: Other 2byte/pixel type 3: Other 3byte/pixel type 7:
|
||
|
* disable color space convert
|
||
|
*/
|
||
|
uint32_t out_color_input_sel_chn:3;
|
||
|
uint32_t reserved_6:26;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_convert_chn_reg_t;
|
||
|
|
||
|
/** Type of out_scramble_chn register
|
||
|
* Configures the tx scramble of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_scramble_sel_pre_chn : R/W; bitpos: [2:0]; default: 0;
|
||
|
* Scramble data before color convert : 0 : BYTE2-1-0 1 : BYTE2-0-1 2 :
|
||
|
* BYTE1-0-2 3 : BYTE1-2-0 4 : BYTE0-2-1 5 : BYTE0-1-2
|
||
|
*/
|
||
|
uint32_t out_scramble_sel_pre_chn:3;
|
||
|
uint32_t reserved_3:29;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_scramble_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param0_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_h0_chn : R/W; bitpos: [20:0]; default: 298;
|
||
|
* Set first 2 parameter of most significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_h0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param0_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param1_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_h1_chn : R/W; bitpos: [27:0]; default: 210164121;
|
||
|
* Set last 2 parameter of most significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_h1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param1_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param2_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_m0_chn : R/W; bitpos: [20:0]; default: 1995050;
|
||
|
* Set first 2 parameter of midium significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_m0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param2_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param3_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_m1_chn : R/W; bitpos: [27:0]; default: 35540784;
|
||
|
* Set last 2 parameter of midium significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_m1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param3_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param4_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_l0_chn : R/W; bitpos: [20:0]; default: 528682;
|
||
|
* Set first 2 parameter of least significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_l0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param4_chn_reg_t;
|
||
|
|
||
|
/** Type of out_color_param5_chn register
|
||
|
* Configures the tx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_color_param_l1_chn : R/W; bitpos: [27:0]; default: 195899392;
|
||
|
* Set last 2 parameter of least significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t out_color_param_l1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_color_param5_chn_reg_t;
|
||
|
|
||
|
/** Type of out_etm_conf_chn register
|
||
|
* Configures the tx etm of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_etm_en_chn : R/W; bitpos: [0]; default: 0;
|
||
|
* Configures the enable of the etm function, 1 is enable.
|
||
|
*/
|
||
|
uint32_t out_etm_en_chn:1;
|
||
|
/** out_etm_loop_en_chn : R/W; bitpos: [1]; default: 0;
|
||
|
* Configures the enable of the descriptors loop etm function, 1 is enable.
|
||
|
*/
|
||
|
uint32_t out_etm_loop_en_chn:1;
|
||
|
/** out_dscr_task_mak_chn : R/W; bitpos: [3:2]; default: 1;
|
||
|
* Configures the maximum number of cacheable descriptors.
|
||
|
*/
|
||
|
uint32_t out_dscr_task_mak_chn:2;
|
||
|
uint32_t reserved_4:28;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_etm_conf_chn_reg_t;
|
||
|
|
||
|
/** Type of out_dscr_port_blk_chn register
|
||
|
* Configures the tx block size in dscr port mode
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_dscr_port_blk_h_chn : R/W; bitpos: [13:0]; default: 18;
|
||
|
* Set the vertical height of tx block size in dscr port mode
|
||
|
*/
|
||
|
uint32_t out_dscr_port_blk_h_chn:14;
|
||
|
/** out_dscr_port_blk_v_chn : R/W; bitpos: [27:14]; default: 18;
|
||
|
* Set the horizontal width of tx block size in dscr port mode
|
||
|
*/
|
||
|
uint32_t out_dscr_port_blk_v_chn:14;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_dscr_port_blk_chn_reg_t;
|
||
|
|
||
|
|
||
|
/** Group: in */
|
||
|
/** Type of in_conf0_chn register
|
||
|
* Configures the rx direction of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_mem_trans_en_chn : R/W; bitpos: [0]; default: 0;
|
||
|
* enable memory trans of the same channel
|
||
|
*/
|
||
|
uint32_t in_mem_trans_en_chn:1;
|
||
|
uint32_t reserved_1:1;
|
||
|
/** indscr_burst_en_chn : R/W; bitpos: [2]; default: 0;
|
||
|
* Set this bit to 1 to enable INCR burst transfer for Rx transmitting link descriptor
|
||
|
* when accessing SRAM.
|
||
|
*/
|
||
|
uint32_t indscr_burst_en_chn:1;
|
||
|
/** in_ecc_aes_en_chn : R/W; bitpos: [3]; default: 0;
|
||
|
* When access address space is ecc/aes area, this bit should be set to 1. In this
|
||
|
* case, the start address of square should be 16-bit aligned. The width of square
|
||
|
* multiply byte number of one pixel should be 16-bit aligned.
|
||
|
*/
|
||
|
uint32_t in_ecc_aes_en_chn:1;
|
||
|
/** in_check_owner_chn : R/W; bitpos: [4]; default: 0;
|
||
|
* Set this bit to enable checking the owner attribute of the link descriptor.
|
||
|
*/
|
||
|
uint32_t in_check_owner_chn:1;
|
||
|
/** in_loop_test_chn : R/W; bitpos: [5]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_loop_test_chn:1;
|
||
|
/** in_mem_burst_length_chn : R/W; bitpos: [8:6]; default: 0;
|
||
|
* Block size of Rx channel 0. 0: single 1: 16 bytes 2: 32 bytes 3: 64
|
||
|
* bytes 4: 128 bytes
|
||
|
*/
|
||
|
uint32_t in_mem_burst_length_chn:3;
|
||
|
/** in_macro_block_size_chn : R/W; bitpos: [10:9]; default: 0;
|
||
|
* Sel RX macro-block size 0: 8pixel*8pixel 1: 8pixel*16pixel 2:
|
||
|
* 16pixel*16pixel 3: no macro-block , only useful in mode 1 of the link
|
||
|
* descriptor
|
||
|
*/
|
||
|
uint32_t in_macro_block_size_chn:2;
|
||
|
/** in_dscr_port_en_chn : R/W; bitpos: [11]; default: 0;
|
||
|
* Set this bit to 1 to obtain descriptor from IP port
|
||
|
*/
|
||
|
uint32_t in_dscr_port_en_chn:1;
|
||
|
/** in_page_bound_en_chn : R/W; bitpos: [12]; default: 0;
|
||
|
* Set this bit to 1 to make sure AXI write data don't cross the address boundary
|
||
|
* which define by mem_burst_length
|
||
|
*/
|
||
|
uint32_t in_page_bound_en_chn:1;
|
||
|
uint32_t reserved_13:3;
|
||
|
/** in_reorder_en_chn : R/W; bitpos: [16]; default: 0;
|
||
|
* Enable RX channel 0 macro block reorder when set to 1, only channel0 have this
|
||
|
* selection
|
||
|
*/
|
||
|
uint32_t in_reorder_en_chn:1;
|
||
|
uint32_t reserved_17:7;
|
||
|
/** in_rst_chn : R/W; bitpos: [24]; default: 0;
|
||
|
* Write 1 then write 0 to this bit to reset Rx channel
|
||
|
*/
|
||
|
uint32_t in_rst_chn:1;
|
||
|
/** in_cmd_disable_chn : R/W; bitpos: [25]; default: 0;
|
||
|
* Write 1 before reset and write 0 after reset
|
||
|
*/
|
||
|
uint32_t in_cmd_disable_chn:1;
|
||
|
/** in_arb_weight_opt_dis_chn : R/W; bitpos: [26]; default: 0;
|
||
|
* Set this bit to 1 to disable arbiter optimum weight function.
|
||
|
*/
|
||
|
uint32_t in_arb_weight_opt_dis_chn:1;
|
||
|
uint32_t reserved_27:5;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_conf0_chn_reg_t;
|
||
|
|
||
|
/** Type of in_int_raw_chn register
|
||
|
* Raw interrupt status of RX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_done_chn_int_raw : R/WTC/SS; bitpos: [0]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last data pointed by one inlink
|
||
|
* descriptor has been transmitted to peripherals for Rx channel 0.
|
||
|
*/
|
||
|
uint32_t in_done_chn_int_raw:1;
|
||
|
/** in_suc_eof_chn_int_raw : R/WTC/SS; bitpos: [1]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last data pointed by one inlink
|
||
|
* descriptor has been received and no data error is detected for Rx channel 0.
|
||
|
*/
|
||
|
uint32_t in_suc_eof_chn_int_raw:1;
|
||
|
/** in_err_eof_chn_int_raw : R/WTC/SS; bitpos: [2]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last data pointed by one inlink
|
||
|
* descriptor has been received and data error is detected
|
||
|
*/
|
||
|
uint32_t in_err_eof_chn_int_raw:1;
|
||
|
/** in_dscr_err_chn_int_raw : R/WTC/SS; bitpos: [3]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when detecting inlink descriptor error,
|
||
|
* including owner error, the second and third word error of inlink descriptor for Rx
|
||
|
* channel 0.
|
||
|
*/
|
||
|
uint32_t in_dscr_err_chn_int_raw:1;
|
||
|
/** infifo_ovf_l1_chn_int_raw : R/WTC/SS; bitpos: [4]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is overflow.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l1_chn_int_raw:1;
|
||
|
/** infifo_udf_l1_chn_int_raw : R/WTC/SS; bitpos: [5]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is underflow.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l1_chn_int_raw:1;
|
||
|
/** infifo_ovf_l2_chn_int_raw : R/WTC/SS; bitpos: [6]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is overflow.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l2_chn_int_raw:1;
|
||
|
/** infifo_udf_l2_chn_int_raw : R/WTC/SS; bitpos: [7]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is underflow.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l2_chn_int_raw:1;
|
||
|
/** infifo_ovf_l3_chn_int_raw : R/WTC/SS; bitpos: [8]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is overflow.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l3_chn_int_raw:1;
|
||
|
/** infifo_udf_l3_chn_int_raw : R/WTC/SS; bitpos: [9]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when fifo of Rx channel is underflow.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l3_chn_int_raw:1;
|
||
|
/** in_dscr_empty_chn_int_raw : R/WTC/SS; bitpos: [10]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when the last descriptor is done but fifo
|
||
|
* also remain data.
|
||
|
*/
|
||
|
uint32_t in_dscr_empty_chn_int_raw:1;
|
||
|
/** infifo_ro_ovf_chn_int_raw : R/WTC/SS; bitpos: [11]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when reorder fifo is overflow.
|
||
|
*/
|
||
|
uint32_t infifo_ro_ovf_chn_int_raw:1;
|
||
|
/** infifo_ro_udf_chn_int_raw : R/WTC/SS; bitpos: [12]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when reorder fifo is underflow.
|
||
|
*/
|
||
|
uint32_t infifo_ro_udf_chn_int_raw:1;
|
||
|
/** in_dscr_task_ovf_chn_int_raw : R/WTC/SS; bitpos: [13]; default: 0;
|
||
|
* The raw interrupt bit turns to high level when dscr ready task fifo is overflow.
|
||
|
*/
|
||
|
uint32_t in_dscr_task_ovf_chn_int_raw:1;
|
||
|
uint32_t reserved_14:18;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_int_raw_chn_reg_t;
|
||
|
|
||
|
/** Type of in_int_ena_chn register
|
||
|
* Interrupt enable bits of RX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_done_chn_int_ena : R/W; bitpos: [0]; default: 0;
|
||
|
* The interrupt enable bit for the IN_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_done_chn_int_ena:1;
|
||
|
/** in_suc_eof_chn_int_ena : R/W; bitpos: [1]; default: 0;
|
||
|
* The interrupt enable bit for the IN_SUC_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_suc_eof_chn_int_ena:1;
|
||
|
/** in_err_eof_chn_int_ena : R/W; bitpos: [2]; default: 0;
|
||
|
* The interrupt enable bit for the IN_ERR_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_err_eof_chn_int_ena:1;
|
||
|
/** in_dscr_err_chn_int_ena : R/W; bitpos: [3]; default: 0;
|
||
|
* The interrupt enable bit for the IN_DSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_err_chn_int_ena:1;
|
||
|
/** infifo_ovf_l1_chn_int_ena : R/W; bitpos: [4]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l1_chn_int_ena:1;
|
||
|
/** infifo_udf_l1_chn_int_ena : R/W; bitpos: [5]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l1_chn_int_ena:1;
|
||
|
/** infifo_ovf_l2_chn_int_ena : R/W; bitpos: [6]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l2_chn_int_ena:1;
|
||
|
/** infifo_udf_l2_chn_int_ena : R/W; bitpos: [7]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l2_chn_int_ena:1;
|
||
|
/** infifo_ovf_l3_chn_int_ena : R/W; bitpos: [8]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l3_chn_int_ena:1;
|
||
|
/** infifo_udf_l3_chn_int_ena : R/W; bitpos: [9]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l3_chn_int_ena:1;
|
||
|
/** in_dscr_empty_chn_int_ena : R/W; bitpos: [10]; default: 0;
|
||
|
* The interrupt enable bit for the IN_DSCR_EMPTY_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_empty_chn_int_ena:1;
|
||
|
/** infifo_ro_ovf_chn_int_ena : R/W; bitpos: [11]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_ovf_chn_int_ena:1;
|
||
|
/** infifo_ro_udf_chn_int_ena : R/W; bitpos: [12]; default: 0;
|
||
|
* The interrupt enable bit for the INFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_udf_chn_int_ena:1;
|
||
|
/** in_dscr_task_ovf_chn_int_ena : R/W; bitpos: [13]; default: 0;
|
||
|
* The interrupt enable bit for the IN_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_task_ovf_chn_int_ena:1;
|
||
|
uint32_t reserved_14:18;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_int_ena_chn_reg_t;
|
||
|
|
||
|
/** Type of in_int_st_chn register
|
||
|
* Masked interrupt status of RX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_done_chn_int_st : RO; bitpos: [0]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_done_chn_int_st:1;
|
||
|
/** in_suc_eof_chn_int_st : RO; bitpos: [1]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_SUC_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_suc_eof_chn_int_st:1;
|
||
|
/** in_err_eof_chn_int_st : RO; bitpos: [2]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_ERR_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_err_eof_chn_int_st:1;
|
||
|
/** in_dscr_err_chn_int_st : RO; bitpos: [3]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_DSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_err_chn_int_st:1;
|
||
|
/** infifo_ovf_l1_chn_int_st : RO; bitpos: [4]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l1_chn_int_st:1;
|
||
|
/** infifo_udf_l1_chn_int_st : RO; bitpos: [5]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l1_chn_int_st:1;
|
||
|
/** infifo_ovf_l2_chn_int_st : RO; bitpos: [6]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l2_chn_int_st:1;
|
||
|
/** infifo_udf_l2_chn_int_st : RO; bitpos: [7]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l2_chn_int_st:1;
|
||
|
/** infifo_ovf_l3_chn_int_st : RO; bitpos: [8]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l3_chn_int_st:1;
|
||
|
/** infifo_udf_l3_chn_int_st : RO; bitpos: [9]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l3_chn_int_st:1;
|
||
|
/** in_dscr_empty_chn_int_st : RO; bitpos: [10]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_DSCR_EMPTY_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_empty_chn_int_st:1;
|
||
|
/** infifo_ro_ovf_chn_int_st : RO; bitpos: [11]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_ovf_chn_int_st:1;
|
||
|
/** infifo_ro_udf_chn_int_st : RO; bitpos: [12]; default: 0;
|
||
|
* The raw interrupt status bit for the INFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_udf_chn_int_st:1;
|
||
|
/** in_dscr_task_ovf_chn_int_st : RO; bitpos: [13]; default: 0;
|
||
|
* The raw interrupt status bit for the IN_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_task_ovf_chn_int_st:1;
|
||
|
uint32_t reserved_14:18;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_int_st_chn_reg_t;
|
||
|
|
||
|
/** Type of in_int_clr_chn register
|
||
|
* Interrupt clear bits of RX channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_done_chn_int_clr : WT; bitpos: [0]; default: 0;
|
||
|
* Set this bit to clear the IN_DONE_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_done_chn_int_clr:1;
|
||
|
/** in_suc_eof_chn_int_clr : WT; bitpos: [1]; default: 0;
|
||
|
* Set this bit to clear the IN_SUC_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_suc_eof_chn_int_clr:1;
|
||
|
/** in_err_eof_chn_int_clr : WT; bitpos: [2]; default: 0;
|
||
|
* Set this bit to clear the IN_ERR_EOF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_err_eof_chn_int_clr:1;
|
||
|
/** in_dscr_err_chn_int_clr : WT; bitpos: [3]; default: 0;
|
||
|
* Set this bit to clear the INDSCR_ERR_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_err_chn_int_clr:1;
|
||
|
/** infifo_ovf_l1_chn_int_clr : WT; bitpos: [4]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_OVF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l1_chn_int_clr:1;
|
||
|
/** infifo_udf_l1_chn_int_clr : WT; bitpos: [5]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_UDF_L1_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l1_chn_int_clr:1;
|
||
|
/** infifo_ovf_l2_chn_int_clr : WT; bitpos: [6]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_OVF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l2_chn_int_clr:1;
|
||
|
/** infifo_udf_l2_chn_int_clr : WT; bitpos: [7]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_UDF_L2_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l2_chn_int_clr:1;
|
||
|
/** infifo_ovf_l3_chn_int_clr : WT; bitpos: [8]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_OVF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ovf_l3_chn_int_clr:1;
|
||
|
/** infifo_udf_l3_chn_int_clr : WT; bitpos: [9]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_UDF_L3_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_udf_l3_chn_int_clr:1;
|
||
|
/** in_dscr_empty_chn_int_clr : WT; bitpos: [10]; default: 0;
|
||
|
* Set this bit to clear the IN_DSCR_EMPTY_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_empty_chn_int_clr:1;
|
||
|
/** infifo_ro_ovf_chn_int_clr : WT; bitpos: [11]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_RO_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_ovf_chn_int_clr:1;
|
||
|
/** infifo_ro_udf_chn_int_clr : WT; bitpos: [12]; default: 0;
|
||
|
* Set this bit to clear the INFIFO_RO_UDF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t infifo_ro_udf_chn_int_clr:1;
|
||
|
/** in_dscr_task_ovf_chn_int_clr : WT; bitpos: [13]; default: 0;
|
||
|
* Set this bit to clear the IN_DSCR_TASK_OVF_CH_INT interrupt.
|
||
|
*/
|
||
|
uint32_t in_dscr_task_ovf_chn_int_clr:1;
|
||
|
uint32_t reserved_14:18;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_int_clr_chn_reg_t;
|
||
|
|
||
|
/** Type of infifo_status_chn register
|
||
|
* Represents the status of the rx fifo of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** infifo_full_l2_chn : RO; bitpos: [0]; default: 0;
|
||
|
* Rx FIFO full signal for Rx channel.
|
||
|
*/
|
||
|
uint32_t infifo_full_l2_chn:1;
|
||
|
/** infifo_empty_l2_chn : RO; bitpos: [1]; default: 1;
|
||
|
* Rx FIFO empty signal for Rx channel.
|
||
|
*/
|
||
|
uint32_t infifo_empty_l2_chn:1;
|
||
|
/** infifo_cnt_l2_chn : RO; bitpos: [5:2]; default: 0;
|
||
|
* The register stores the byte number of the data in Rx FIFO for Rx channel.
|
||
|
*/
|
||
|
uint32_t infifo_cnt_l2_chn:4;
|
||
|
uint32_t reserved_6:1;
|
||
|
/** in_remain_under_1b_chn : RO; bitpos: [7]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_1b_chn:1;
|
||
|
/** in_remain_under_2b_chn : RO; bitpos: [8]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_2b_chn:1;
|
||
|
/** in_remain_under_3b_chn : RO; bitpos: [9]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_3b_chn:1;
|
||
|
/** in_remain_under_4b_chn : RO; bitpos: [10]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_4b_chn:1;
|
||
|
/** in_remain_under_5b_chn : RO; bitpos: [11]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_5b_chn:1;
|
||
|
/** in_remain_under_6b_chn : RO; bitpos: [12]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_6b_chn:1;
|
||
|
/** in_remain_under_7b_chn : RO; bitpos: [13]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_7b_chn:1;
|
||
|
/** in_remain_under_8b_chn : RO; bitpos: [14]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_remain_under_8b_chn:1;
|
||
|
/** infifo_full_l1_chn : RO; bitpos: [15]; default: 0;
|
||
|
* Tx FIFO full signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_full_l1_chn:1;
|
||
|
/** infifo_empty_l1_chn : RO; bitpos: [16]; default: 1;
|
||
|
* Tx FIFO empty signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_empty_l1_chn:1;
|
||
|
/** infifo_cnt_l1_chn : RO; bitpos: [21:17]; default: 0;
|
||
|
* The register stores the byte number of the data in Tx FIFO for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_cnt_l1_chn:5;
|
||
|
/** infifo_full_l3_chn : RO; bitpos: [22]; default: 0;
|
||
|
* Tx FIFO full signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_full_l3_chn:1;
|
||
|
/** infifo_empty_l3_chn : RO; bitpos: [23]; default: 1;
|
||
|
* Tx FIFO empty signal for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_empty_l3_chn:1;
|
||
|
/** infifo_cnt_l3_chn : RO; bitpos: [28:24]; default: 0;
|
||
|
* The register stores the byte number of the data in Tx FIFO for Tx channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_cnt_l3_chn:5;
|
||
|
uint32_t reserved_29:3;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_infifo_status_chn_reg_t;
|
||
|
|
||
|
/** Type of in_pop_chn register
|
||
|
* Configures the rx fifo of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** infifo_rdata_chn : RO; bitpos: [10:0]; default: 1024;
|
||
|
* This register stores the data popping from DMA Rx FIFO.
|
||
|
*/
|
||
|
uint32_t infifo_rdata_chn:11;
|
||
|
/** infifo_pop_chn : R/W/SC; bitpos: [11]; default: 0;
|
||
|
* Set this bit to pop data from DMA Rx FIFO.
|
||
|
*/
|
||
|
uint32_t infifo_pop_chn:1;
|
||
|
uint32_t reserved_12:20;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_pop_chn_reg_t;
|
||
|
|
||
|
/** Type of in_link_conf_chn register
|
||
|
* Configures the rx descriptor operations of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
uint32_t reserved_0:20;
|
||
|
/** inlink_auto_ret_chn : R/W; bitpos: [20]; default: 1;
|
||
|
* Set this bit to return to current inlink descriptor's address, when there are some
|
||
|
* errors in current receiving data.
|
||
|
*/
|
||
|
uint32_t inlink_auto_ret_chn:1;
|
||
|
/** inlink_stop_chn : R/W/SC; bitpos: [21]; default: 0;
|
||
|
* Set this bit to stop dealing with the inlink descriptors.
|
||
|
*/
|
||
|
uint32_t inlink_stop_chn:1;
|
||
|
/** inlink_start_chn : R/W/SC; bitpos: [22]; default: 0;
|
||
|
* Set this bit to start dealing with the inlink descriptors.
|
||
|
*/
|
||
|
uint32_t inlink_start_chn:1;
|
||
|
/** inlink_restart_chn : R/W/SC; bitpos: [23]; default: 0;
|
||
|
* Set this bit to mount a new inlink descriptor.
|
||
|
*/
|
||
|
uint32_t inlink_restart_chn:1;
|
||
|
/** inlink_park_chn : RO; bitpos: [24]; default: 1;
|
||
|
* 1: the inlink descriptor's FSM is in idle state. 0: the inlink descriptor's FSM is
|
||
|
* working.
|
||
|
*/
|
||
|
uint32_t inlink_park_chn:1;
|
||
|
uint32_t reserved_25:7;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_link_conf_chn_reg_t;
|
||
|
|
||
|
/** Type of in_link_addr_chn register
|
||
|
* Configures the rx descriptor address of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** inlink_addr_chn : R/W; bitpos: [31:0]; default: 0;
|
||
|
* This register stores the first inlink descriptor's address.
|
||
|
*/
|
||
|
uint32_t inlink_addr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_link_addr_chn_reg_t;
|
||
|
|
||
|
/** Type of in_state_chn register
|
||
|
* Represents the working status of the rx descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** inlink_dscr_addr_chn : RO; bitpos: [17:0]; default: 0;
|
||
|
* This register stores the current inlink descriptor's address.
|
||
|
*/
|
||
|
uint32_t inlink_dscr_addr_chn:18;
|
||
|
/** in_dscr_state_chn : RO; bitpos: [19:18]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_dscr_state_chn:2;
|
||
|
/** in_state_chn : RO; bitpos: [22:20]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_state_chn:3;
|
||
|
/** in_reset_avail_chn : RO; bitpos: [23]; default: 1;
|
||
|
* This register indicate that if the channel reset is safety.
|
||
|
*/
|
||
|
uint32_t in_reset_avail_chn:1;
|
||
|
uint32_t reserved_24:8;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_state_chn_reg_t;
|
||
|
|
||
|
/** Type of in_suc_eof_des_addr_chn register
|
||
|
* Represents the address associated with the inlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_suc_eof_des_addr_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* This register stores the address of the inlink descriptor when the EOF bit in this
|
||
|
* descriptor is 1.
|
||
|
*/
|
||
|
uint32_t in_suc_eof_des_addr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_suc_eof_des_addr_chn_reg_t;
|
||
|
|
||
|
/** Type of in_err_eof_des_addr_chn register
|
||
|
* Represents the address associated with the inlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_err_eof_des_addr_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* This register stores the address of the inlink descriptor when there are some
|
||
|
* errors in current receiving data.
|
||
|
*/
|
||
|
uint32_t in_err_eof_des_addr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_err_eof_des_addr_chn_reg_t;
|
||
|
|
||
|
/** Type of in_dscr_chn register
|
||
|
* Represents the address associated with the inlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** inlink_dscr_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the next inlink descriptor address x.
|
||
|
*/
|
||
|
uint32_t inlink_dscr_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_dscr_chn_reg_t;
|
||
|
|
||
|
/** Type of in_dscr_bf0_chn register
|
||
|
* Represents the address associated with the inlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** inlink_dscr_bf0_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the last inlink descriptor's next address x-1.
|
||
|
*/
|
||
|
uint32_t inlink_dscr_bf0_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_dscr_bf0_chn_reg_t;
|
||
|
|
||
|
/** Type of in_dscr_bf1_chn register
|
||
|
* Represents the address associated with the inlink descriptor of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** inlink_dscr_bf1_chn : RO; bitpos: [31:0]; default: 0;
|
||
|
* The address of the second-to-last inlink descriptor's next address x-2.
|
||
|
*/
|
||
|
uint32_t inlink_dscr_bf1_chn:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_dscr_bf1_chn_reg_t;
|
||
|
|
||
|
/** Type of in_peri_sel_chn register
|
||
|
* Configures the rx peripheral of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_peri_sel_chn : R/W; bitpos: [2:0]; default: 7;
|
||
|
* This register is used to select peripheral for Rx channel 0: jpeg 1:
|
||
|
* display-1 2: display-2 7: no choose
|
||
|
*/
|
||
|
uint32_t in_peri_sel_chn:3;
|
||
|
uint32_t reserved_3:29;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_peri_sel_chn_reg_t;
|
||
|
|
||
|
/** Type of in_arb_chn register
|
||
|
* Configures the rx arbiter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_arb_token_num_chn : R/W; bitpos: [3:0]; default: 1;
|
||
|
* Set the max number of token count of arbiter
|
||
|
*/
|
||
|
uint32_t in_arb_token_num_chn:4;
|
||
|
/** in_arb_priority_chn : R/W; bitpos: [4]; default: 1;
|
||
|
* Set the priority of channel
|
||
|
*/
|
||
|
uint32_t in_arb_priority_chn:1;
|
||
|
uint32_t reserved_5:27;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_arb_chn_reg_t;
|
||
|
|
||
|
/** Type of in_ro_status_chn register
|
||
|
* Represents the status of the rx reorder module of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** infifo_ro_cnt_chn : RO; bitpos: [4:0]; default: 0;
|
||
|
* The register stores the byte number of the data in color convert Rx FIFO for
|
||
|
* channel 0.
|
||
|
*/
|
||
|
uint32_t infifo_ro_cnt_chn:5;
|
||
|
/** in_ro_wr_state_chn : RO; bitpos: [6:5]; default: 0;
|
||
|
* The register stores the state of read ram of reorder
|
||
|
*/
|
||
|
uint32_t in_ro_wr_state_chn:2;
|
||
|
/** in_ro_rd_state_chn : RO; bitpos: [8:7]; default: 0;
|
||
|
* The register stores the state of write ram of reorder
|
||
|
*/
|
||
|
uint32_t in_ro_rd_state_chn:2;
|
||
|
/** in_pixel_byte_chn : RO; bitpos: [12:9]; default: 0;
|
||
|
* the number of bytes contained in a pixel at RX channel 0: 1byte 1: 1.5bytes
|
||
|
* 2 : 2bytes 3: 2.5bytes 4: 3bytes 5: 4bytes
|
||
|
*/
|
||
|
uint32_t in_pixel_byte_chn:4;
|
||
|
/** in_burst_block_num_chn : RO; bitpos: [16:13]; default: 0;
|
||
|
* the number of macro blocks contained in a burst of data at RX channel
|
||
|
*/
|
||
|
uint32_t in_burst_block_num_chn:4;
|
||
|
uint32_t reserved_17:15;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_ro_status_chn_reg_t;
|
||
|
|
||
|
/** Type of in_ro_pd_conf_chn register
|
||
|
* Configures the rx reorder memory of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
uint32_t reserved_0:4;
|
||
|
/** in_ro_ram_force_pd_chn : R/W; bitpos: [4]; default: 0;
|
||
|
* dma reorder ram power down
|
||
|
*/
|
||
|
uint32_t in_ro_ram_force_pd_chn:1;
|
||
|
/** in_ro_ram_force_pu_chn : R/W; bitpos: [5]; default: 1;
|
||
|
* dma reorder ram power up
|
||
|
*/
|
||
|
uint32_t in_ro_ram_force_pu_chn:1;
|
||
|
/** in_ro_ram_clk_fo_chn : R/W; bitpos: [6]; default: 0;
|
||
|
* 1: Force to open the clock and bypass the gate-clock when accessing the RAM in DMA.
|
||
|
* 0: A gate-clock will be used when accessing the RAM in DMA.
|
||
|
*/
|
||
|
uint32_t in_ro_ram_clk_fo_chn:1;
|
||
|
uint32_t reserved_7:25;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_ro_pd_conf_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_convert_chn register
|
||
|
* Configures the tx color convert of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_output_sel_chn : R/W; bitpos: [1:0]; default: 0;
|
||
|
* Set final color convert process and output type 0: RGB888 to RGB565 1:
|
||
|
* output directly
|
||
|
*/
|
||
|
uint32_t in_color_output_sel_chn:2;
|
||
|
/** in_color_3b_proc_en_chn : R/W; bitpos: [2]; default: 0;
|
||
|
* Enable generic color convert modlue between color input & color output, need to
|
||
|
* configure parameter.
|
||
|
*/
|
||
|
uint32_t in_color_3b_proc_en_chn:1;
|
||
|
/** in_color_input_sel_chn : R/W; bitpos: [5:3]; default: 7;
|
||
|
* Set first color convert process and input color type 0: YUV422/420 to YUV444
|
||
|
* 1: YUV422 2: YUV444/420 7: disable color space convert
|
||
|
*/
|
||
|
uint32_t in_color_input_sel_chn:3;
|
||
|
uint32_t reserved_6:26;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_convert_chn_reg_t;
|
||
|
|
||
|
/** Type of in_scramble_chn register
|
||
|
* Configures the rx scramble of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_scramble_sel_pre_chn : R/W; bitpos: [2:0]; default: 0;
|
||
|
* Scramble data before color convert : 0 : BYTE2-1-0 1 : BYTE2-0-1 2 :
|
||
|
* BYTE1-0-2 3 : BYTE1-2-0 4 : BYTE0-2-1 5 : BYTE0-1-2
|
||
|
*/
|
||
|
uint32_t in_scramble_sel_pre_chn:3;
|
||
|
/** in_scramble_sel_post_chn : R/W; bitpos: [5:3]; default: 0;
|
||
|
* Scramble data after color convert : 0 : BYTE2-1-0 1 : BYTE2-0-1 2 : BYTE1-0-2
|
||
|
* 3 : BYTE1-2-0 4 : BYTE0-2-1 5 : BYTE0-1-2
|
||
|
*/
|
||
|
uint32_t in_scramble_sel_post_chn:3;
|
||
|
uint32_t reserved_6:26;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_scramble_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param0_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_h0_chn : R/W; bitpos: [20:0]; default: 298;
|
||
|
* Set first 2 parameter of most significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_h0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param0_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param1_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_h1_chn : R/W; bitpos: [27:0]; default: 210164121;
|
||
|
* Set last 2 parameter of most significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_h1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param1_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param2_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_m0_chn : R/W; bitpos: [20:0]; default: 1995050;
|
||
|
* Set first 2 parameter of midium significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_m0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param2_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param3_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_m1_chn : R/W; bitpos: [27:0]; default: 35540784;
|
||
|
* Set last 2 parameter of midium significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_m1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param3_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param4_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_l0_chn : R/W; bitpos: [20:0]; default: 528682;
|
||
|
* Set first 2 parameter of least significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_l0_chn:21;
|
||
|
uint32_t reserved_21:11;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param4_chn_reg_t;
|
||
|
|
||
|
/** Type of in_color_param5_chn register
|
||
|
* Configures the rx color convert parameter of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_color_param_l1_chn : R/W; bitpos: [27:0]; default: 195899392;
|
||
|
* Set last 2 parameter of least significant byte of pending 3 bytes
|
||
|
*/
|
||
|
uint32_t in_color_param_l1_chn:28;
|
||
|
uint32_t reserved_28:4;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_color_param5_chn_reg_t;
|
||
|
|
||
|
/** Type of in_etm_conf_chn register
|
||
|
* Configures the rx etm of channel 0
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_etm_en_chn : R/W; bitpos: [0]; default: 0;
|
||
|
* Configures the enable of the etm function, 1 is enable.
|
||
|
*/
|
||
|
uint32_t in_etm_en_chn:1;
|
||
|
/** in_etm_loop_en_chn : R/W; bitpos: [1]; default: 0;
|
||
|
* Configures the enable of the descriptors loop etm function, 1 is enable.
|
||
|
*/
|
||
|
uint32_t in_etm_loop_en_chn:1;
|
||
|
/** in_dscr_task_mak_chn : R/W; bitpos: [3:2]; default: 1;
|
||
|
* Configures the maximum number of cacheable descriptors.
|
||
|
*/
|
||
|
uint32_t in_dscr_task_mak_chn:2;
|
||
|
uint32_t reserved_4:28;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_etm_conf_chn_reg_t;
|
||
|
|
||
|
|
||
|
/** Group: Status Registers */
|
||
|
/** Type of axi_err register
|
||
|
* Represents the status of th axi bus
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** rid_err_cnt : RO; bitpos: [3:0]; default: 0;
|
||
|
* AXI read id err cnt
|
||
|
*/
|
||
|
uint32_t rid_err_cnt:4;
|
||
|
/** rresp_err_cnt : RO; bitpos: [7:4]; default: 0;
|
||
|
* AXI read resp err cnt
|
||
|
*/
|
||
|
uint32_t rresp_err_cnt:4;
|
||
|
/** wresp_err_cnt : RO; bitpos: [11:8]; default: 0;
|
||
|
* AXI write resp err cnt
|
||
|
*/
|
||
|
uint32_t wresp_err_cnt:4;
|
||
|
/** rd_fifo_cnt : RO; bitpos: [14:12]; default: 0;
|
||
|
* AXI read cmd fifo remain cmd count
|
||
|
*/
|
||
|
uint32_t rd_fifo_cnt:3;
|
||
|
/** rd_bak_fifo_cnt : RO; bitpos: [18:15]; default: 0;
|
||
|
* AXI read backup cmd fifo remain cmd count
|
||
|
*/
|
||
|
uint32_t rd_bak_fifo_cnt:4;
|
||
|
/** wr_fifo_cnt : RO; bitpos: [21:19]; default: 0;
|
||
|
* AXI write cmd fifo remain cmd count
|
||
|
*/
|
||
|
uint32_t wr_fifo_cnt:3;
|
||
|
/** wr_bak_fifo_cnt : RO; bitpos: [25:22]; default: 0;
|
||
|
* AXI write backup cmd fifo remain cmd count
|
||
|
*/
|
||
|
uint32_t wr_bak_fifo_cnt:4;
|
||
|
uint32_t reserved_26:6;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_axi_err_reg_t;
|
||
|
|
||
|
/** Type of date register
|
||
|
* register version.
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** date : R/W; bitpos: [31:0]; default: 36716816;
|
||
|
* register version.
|
||
|
*/
|
||
|
uint32_t date:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_date_reg_t;
|
||
|
|
||
|
|
||
|
/** Group: Configuration Registers */
|
||
|
/** Type of rst_conf register
|
||
|
* Configures the reset of axi
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** axim_rd_rst : R/W; bitpos: [0]; default: 0;
|
||
|
* Write 1 then write 0 to this bit to reset axi master read data FIFO.
|
||
|
*/
|
||
|
uint32_t axim_rd_rst:1;
|
||
|
/** axim_wr_rst : R/W; bitpos: [1]; default: 0;
|
||
|
* Write 1 then write 0 to this bit to reset axi master write data FIFO.
|
||
|
*/
|
||
|
uint32_t axim_wr_rst:1;
|
||
|
/** clk_en : R/W; bitpos: [2]; default: 0;
|
||
|
* 1'h1: Force clock on for register. 1'h0: Support clock only when application writes
|
||
|
* registers.
|
||
|
*/
|
||
|
uint32_t clk_en:1;
|
||
|
uint32_t reserved_3:29;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_rst_conf_reg_t;
|
||
|
|
||
|
/** Type of intr_mem_start_addr register
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** access_intr_mem_start_addr : R/W; bitpos: [31:0]; default: 806354944;
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
uint32_t access_intr_mem_start_addr:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_intr_mem_start_addr_reg_t;
|
||
|
|
||
|
/** Type of intr_mem_end_addr register
|
||
|
* The end address of accessible address space.
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** access_intr_mem_end_addr : R/W; bitpos: [31:0]; default: 2415919103;
|
||
|
* The end address of accessible address space. The access address beyond this range
|
||
|
* would lead to descriptor error.
|
||
|
*/
|
||
|
uint32_t access_intr_mem_end_addr:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_intr_mem_end_addr_reg_t;
|
||
|
|
||
|
/** Type of extr_mem_start_addr register
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** access_extr_mem_start_addr : R/W; bitpos: [31:0]; default: 806354944;
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
uint32_t access_extr_mem_start_addr:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_extr_mem_start_addr_reg_t;
|
||
|
|
||
|
/** Type of extr_mem_end_addr register
|
||
|
* The end address of accessible address space.
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** access_extr_mem_end_addr : R/W; bitpos: [31:0]; default: 2415919103;
|
||
|
* The end address of accessible address space. The access address beyond this range
|
||
|
* would lead to descriptor error.
|
||
|
*/
|
||
|
uint32_t access_extr_mem_end_addr:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_extr_mem_end_addr_reg_t;
|
||
|
|
||
|
/** Type of out_arb_config register
|
||
|
* Configures the tx arbiter
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** out_arb_timeout_num : R/W; bitpos: [15:0]; default: 0;
|
||
|
* Set the max number of timeout count of arbiter
|
||
|
*/
|
||
|
uint32_t out_arb_timeout_num:16;
|
||
|
/** out_weight_en : R/W; bitpos: [16]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t out_weight_en:1;
|
||
|
uint32_t reserved_17:15;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_out_arb_config_reg_t;
|
||
|
|
||
|
/** Type of in_arb_config register
|
||
|
* Configures the rx arbiter
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** in_arb_timeout_num : R/W; bitpos: [15:0]; default: 0;
|
||
|
* Set the max number of timeout count of arbiter
|
||
|
*/
|
||
|
uint32_t in_arb_timeout_num:16;
|
||
|
/** in_weight_en : R/W; bitpos: [16]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t in_weight_en:1;
|
||
|
uint32_t reserved_17:15;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_in_arb_config_reg_t;
|
||
|
|
||
|
/** Type of rdn_result register
|
||
|
* reserved
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** rdn_ena : R/W; bitpos: [0]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t rdn_ena:1;
|
||
|
/** rdn_result : RO; bitpos: [1]; default: 0;
|
||
|
* reserved
|
||
|
*/
|
||
|
uint32_t rdn_result:1;
|
||
|
uint32_t reserved_2:30;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_rdn_result_reg_t;
|
||
|
|
||
|
/** Type of rdn_eco_high register
|
||
|
* reserved
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** rdn_eco_high : R/W; bitpos: [31:0]; default: 4294967295;
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
uint32_t rdn_eco_high:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_rdn_eco_high_reg_t;
|
||
|
|
||
|
/** Type of rdn_eco_low register
|
||
|
* reserved
|
||
|
*/
|
||
|
typedef union {
|
||
|
struct {
|
||
|
/** rdn_eco_low : R/W; bitpos: [31:0]; default: 0;
|
||
|
* The start address of accessible address space.
|
||
|
*/
|
||
|
uint32_t rdn_eco_low:32;
|
||
|
};
|
||
|
uint32_t val;
|
||
|
} dma2d_rdn_eco_low_reg_t;
|
||
|
|
||
|
typedef struct {
|
||
|
volatile dma2d_out_conf0_chn_reg_t out_conf0_ch0;
|
||
|
volatile dma2d_out_int_raw_chn_reg_t out_int_raw_ch0;
|
||
|
volatile dma2d_out_int_ena_chn_reg_t out_int_ena_ch0;
|
||
|
volatile dma2d_out_int_st_chn_reg_t out_int_st_ch0;
|
||
|
volatile dma2d_out_int_clr_chn_reg_t out_int_clr_ch0;
|
||
|
volatile dma2d_outfifo_status_chn_reg_t outfifo_status_ch0;
|
||
|
volatile dma2d_out_push_chn_reg_t out_push_ch0;
|
||
|
volatile dma2d_out_link_conf_chn_reg_t out_link_conf_ch0;
|
||
|
volatile dma2d_out_link_addr_chn_reg_t out_link_addr_ch0;
|
||
|
volatile dma2d_out_state_chn_reg_t out_state_ch0;
|
||
|
volatile dma2d_out_eof_des_addr_chn_reg_t out_eof_des_addr_ch0;
|
||
|
volatile dma2d_out_dscr_chn_reg_t out_dscr_ch0;
|
||
|
volatile dma2d_out_dscr_bf0_chn_reg_t out_dscr_bf0_ch0;
|
||
|
volatile dma2d_out_dscr_bf1_chn_reg_t out_dscr_bf1_ch0;
|
||
|
volatile dma2d_out_peri_sel_chn_reg_t out_peri_sel_ch0;
|
||
|
volatile dma2d_out_arb_chn_reg_t out_arb_ch0;
|
||
|
volatile dma2d_out_ro_status_chn_reg_t out_ro_status_ch0;
|
||
|
volatile dma2d_out_ro_pd_conf_chn_reg_t out_ro_pd_conf_ch0; //only chn0
|
||
|
volatile dma2d_out_color_convert_chn_reg_t out_color_convert_ch0;
|
||
|
volatile dma2d_out_scramble_chn_reg_t out_scramble_ch0;
|
||
|
volatile dma2d_out_color_param0_chn_reg_t out_color_param0_ch0;
|
||
|
volatile dma2d_out_color_param1_chn_reg_t out_color_param1_ch0;
|
||
|
volatile dma2d_out_color_param2_chn_reg_t out_color_param2_ch0;
|
||
|
volatile dma2d_out_color_param3_chn_reg_t out_color_param3_ch0;
|
||
|
volatile dma2d_out_color_param4_chn_reg_t out_color_param4_ch0;
|
||
|
volatile dma2d_out_color_param5_chn_reg_t out_color_param5_ch0;
|
||
|
volatile dma2d_out_etm_conf_chn_reg_t out_etm_conf_ch0;
|
||
|
volatile dma2d_out_dscr_port_blk_chn_reg_t out_dscr_port_blk_ch0;
|
||
|
uint32_t reserved[36];
|
||
|
} dma2d_out_chn_reg_t;
|
||
|
|
||
|
typedef struct {
|
||
|
volatile dma2d_in_conf0_chn_reg_t in_conf0;
|
||
|
volatile dma2d_in_int_raw_chn_reg_t in_int_raw;
|
||
|
volatile dma2d_in_int_ena_chn_reg_t in_int_ena;
|
||
|
volatile dma2d_in_int_st_chn_reg_t in_int_st;
|
||
|
volatile dma2d_in_int_clr_chn_reg_t in_int_clr;
|
||
|
volatile dma2d_infifo_status_chn_reg_t infifo_status;
|
||
|
volatile dma2d_in_pop_chn_reg_t in_pop;
|
||
|
volatile dma2d_in_link_conf_chn_reg_t in_link_conf;
|
||
|
volatile dma2d_in_link_addr_chn_reg_t in_link_addr;
|
||
|
volatile dma2d_in_state_chn_reg_t in_state;
|
||
|
volatile dma2d_in_suc_eof_des_addr_chn_reg_t in_suc_eof_des_addr;
|
||
|
volatile dma2d_in_err_eof_des_addr_chn_reg_t in_err_eof_des_addr;
|
||
|
volatile dma2d_in_dscr_chn_reg_t in_dscr;
|
||
|
volatile dma2d_in_dscr_bf0_chn_reg_t in_dscr_bf0;
|
||
|
volatile dma2d_in_dscr_bf1_chn_reg_t in_dscr_bf1;
|
||
|
volatile dma2d_in_peri_sel_chn_reg_t in_peri_sel;
|
||
|
volatile dma2d_in_arb_chn_reg_t in_arb;
|
||
|
volatile dma2d_in_ro_status_chn_reg_t in_ro_status;
|
||
|
volatile dma2d_in_ro_pd_conf_chn_reg_t in_ro_pd_conf; //only ch0
|
||
|
volatile dma2d_in_color_convert_chn_reg_t in_color_convert; //only ch0
|
||
|
volatile dma2d_in_scramble_chn_reg_t in_scramble; //only ch0
|
||
|
volatile dma2d_in_color_param0_chn_reg_t in_color_param0; //only ch0
|
||
|
volatile dma2d_in_color_param1_chn_reg_t in_color_param1; //only ch0
|
||
|
volatile dma2d_in_color_param2_chn_reg_t in_color_param2; //only ch0
|
||
|
volatile dma2d_in_color_param3_chn_reg_t in_color_param3; //only ch0
|
||
|
volatile dma2d_in_color_param4_chn_reg_t in_color_param4; //only ch0
|
||
|
volatile dma2d_in_color_param5_chn_reg_t in_color_param5; //only ch0
|
||
|
volatile dma2d_in_etm_conf_chn_reg_t in_etm_conf;
|
||
|
uint32_t reserved_570[36];
|
||
|
} dma2d_in_ch0_reg_t;
|
||
|
|
||
|
typedef struct {
|
||
|
volatile dma2d_in_conf0_chn_reg_t in_conf0;
|
||
|
volatile dma2d_in_int_raw_chn_reg_t in_int_raw;
|
||
|
volatile dma2d_in_int_ena_chn_reg_t in_int_ena;
|
||
|
volatile dma2d_in_int_st_chn_reg_t in_int_st;
|
||
|
volatile dma2d_in_int_clr_chn_reg_t in_int_clr;
|
||
|
volatile dma2d_infifo_status_chn_reg_t infifo_status;
|
||
|
volatile dma2d_in_pop_chn_reg_t in_pop;
|
||
|
volatile dma2d_in_link_conf_chn_reg_t in_link_conf;
|
||
|
volatile dma2d_in_link_addr_chn_reg_t in_link_addr;
|
||
|
volatile dma2d_in_state_chn_reg_t in_state;
|
||
|
volatile dma2d_in_suc_eof_des_addr_chn_reg_t in_suc_eof_des_addr;
|
||
|
volatile dma2d_in_err_eof_des_addr_chn_reg_t in_err_eof_des_addr;
|
||
|
volatile dma2d_in_dscr_chn_reg_t in_dscr;
|
||
|
volatile dma2d_in_dscr_bf0_chn_reg_t in_dscr_bf0;
|
||
|
volatile dma2d_in_dscr_bf1_chn_reg_t in_dscr_bf1;
|
||
|
volatile dma2d_in_peri_sel_chn_reg_t in_peri_sel;
|
||
|
volatile dma2d_in_arb_chn_reg_t in_arb;
|
||
|
volatile dma2d_in_ro_status_chn_reg_t in_ro_status;
|
||
|
volatile dma2d_in_etm_conf_chn_reg_t in_etm_conf;
|
||
|
} dma2d_in_ch1_reg_t;
|
||
|
|
||
|
typedef struct {
|
||
|
volatile dma2d_out_chn_reg_t out_channel[3];
|
||
|
uint32_t reserved_300[128];
|
||
|
volatile dma2d_in_ch0_reg_t in_channel0;
|
||
|
volatile dma2d_in_ch1_reg_t in_channel1;
|
||
|
uint32_t reserved_6dc[237];
|
||
|
volatile dma2d_axi_err_reg_t axi_err;
|
||
|
volatile dma2d_rst_conf_reg_t rst_conf;
|
||
|
volatile dma2d_intr_mem_start_addr_reg_t intr_mem_start_addr;
|
||
|
volatile dma2d_intr_mem_end_addr_reg_t intr_mem_end_addr;
|
||
|
volatile dma2d_extr_mem_start_addr_reg_t extr_mem_start_addr;
|
||
|
volatile dma2d_extr_mem_end_addr_reg_t extr_mem_end_addr;
|
||
|
volatile dma2d_out_arb_config_reg_t out_arb_config;
|
||
|
volatile dma2d_in_arb_config_reg_t in_arb_config;
|
||
|
volatile dma2d_rdn_result_reg_t rdn_result;
|
||
|
volatile dma2d_rdn_eco_high_reg_t rdn_eco_high;
|
||
|
volatile dma2d_rdn_eco_low_reg_t rdn_eco_low;
|
||
|
volatile dma2d_date_reg_t date;
|
||
|
} dma2d_dev_t;
|
||
|
|
||
|
extern dma2d_dev_t DMA2D;
|
||
|
|
||
|
#ifndef __cplusplus
|
||
|
_Static_assert(sizeof(dma2d_dev_t) == 0xa30, "Invalid size of dma2d_dev_t structure");
|
||
|
#endif
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
}
|
||
|
#endif
|