alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
7099c2b444
esp-idf/components/freemodbus/CMakeLists.txt

46 lines
1.6 KiB
CMake
Raw Normal View History

examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 11:45:41 -04:00
# The following five lines of boilerplate have to be in your project's
# CMakeLists in this exact order for cmake to work correctly
cmake: some formatting fixes Do not include bootloader in flash target when secure boot is enabled. Emit signing warning on all cases where signed apps are enabled (secure boot and signed images) Follow convention of capital letters for SECURE_BOOT_SIGNING_KEY variable, since it is relevant to other components, not just bootloader. Pass signing key and verification key via config, not requiring bootloader to know parent app dir. Misc. variables name corrections
2019-06-21 02:29:32 -04:00
set(srcs
"common/esp_modbus_master.c"
components: use new component registration api
2019-04-28 03:38:23 -04:00
"common/esp_modbus_slave.c"
"modbus/mb.c"
"modbus/mb_m.c"
"modbus/ascii/mbascii.c"
freemodbus: add modbus master ascii add support of modbus master ascii rename base dir name of master and slave example to be mb_slave, mb_master to avoid conflict with sdio/slave example test add Kconfig option to enable ASCII and RTU mode separately update ASCII options + remove cast for errors added baudrate for examples into Kconfig updated magic numbers for timer timeout put ascii private definitions into one file
2019-11-26 00:16:25 -05:00
"modbus/ascii/mbascii_m.c"
components: use new component registration api
2019-04-28 03:38:23 -04:00
"modbus/rtu/mbrtu_m.c"
"modbus/rtu/mbrtu.c"
"modbus/rtu/mbcrc.c"
"modbus/tcp/mbtcp.c"
"port/port.c"
"port/portevent.c"
"port/portevent_m.c"
"port/portother.c"
"port/portother_m.c"
"port/portserial.c"
"port/portserial_m.c"
"port/porttimer.c"
"port/porttimer_m.c"
"modbus/functions/mbfunccoils.c"
"modbus/functions/mbfunccoils_m.c"
"modbus/functions/mbfuncdiag.c"
"modbus/functions/mbfuncdisc.c"
"modbus/functions/mbfuncdisc_m.c"
"modbus/functions/mbfuncholding.c"
"modbus/functions/mbfuncholding_m.c"
"modbus/functions/mbfuncinput.c"
"modbus/functions/mbfuncinput_m.c"
"modbus/functions/mbfuncother.c"
"modbus/functions/mbutils.c"
"serial_slave/modbus_controller/mbc_serial_slave.c"
"serial_master/modbus_controller/mbc_serial_master.c")
set(include_dirs common/include)
set(priv_include_dirs common port modbus modbus/ascii modbus/functions
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
modbus/rtu modbus/tcp modbus/include)
components: use new component registration api
2019-04-28 03:38:23 -04:00
list(APPEND priv_include_dirs serial_slave/port serial_slave/modbus_controller
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 09:51:27 -04:00
serial_master/port serial_master/modbus_controller)
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 11:45:41 -04:00
components: use new component registration api
2019-04-28 03:38:23 -04:00
idf_component_register(SRCS "${srcs}"
INCLUDE_DIRS "${include_dirs}"
PRIV_INCLUDE_DIRS "${priv_include_dirs}"
REQUIRES driver)
Reference in New Issue Copy Permalink