esp-idf/components/bt/host/bluedroid/stack/btu/btu_hcif.c

2251 lines
68 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains functions that interface with the HCI transport. On
* the receive side, it routes events to the appropriate handler, e.g.
* L2CAP, ScoMgr. On the transmit side, it manages the command
* transmission.
*
******************************************************************************/
//#define LOG_TAG "bt_btu_hcif"
//#include <stdlib.h>
#include <string.h>
#include "stack/bt_types.h"
#include "stack/hcimsgs.h"
#include "stack/btu.h"
#include "l2c_int.h"
#include "stack/btm_api.h"
#include "btm_int.h"
//#include "bt_utils.h"
#include "device/controller.h"
#include "osi/osi.h"
#include "hci/hci_layer.h"
#include "common/bt_trace.h"
#include "osi/thread.h"
2018-10-18 09:12:13 -04:00
//#include "osi/mutex.h"
// TODO(zachoverflow): remove this horrible hack
#include "stack/btu.h"
extern void btm_process_cancel_complete(UINT8 status, UINT8 mode);
extern void btm_ble_test_command_complete(UINT8 *p);
/********************************************************************************/
/* L O C A L F U N C T I O N P R O T O T Y P E S */
/********************************************************************************/
static void btu_hcif_inquiry_comp_evt (UINT8 *p);
static void btu_hcif_inquiry_result_evt (UINT8 *p);
static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p);
static void btu_hcif_extended_inquiry_result_evt (UINT8 *p);
static void btu_hcif_connection_comp_evt (UINT8 *p);
static void btu_hcif_connection_request_evt (UINT8 *p);
static void btu_hcif_disconnection_comp_evt (UINT8 *p);
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_authentication_comp_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len);
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_encryption_change_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p);
static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p);
static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p);
static void btu_hcif_qos_setup_comp_evt (UINT8 *p);
static void btu_hcif_command_complete_evt (BT_HDR *response, void *context);
static void btu_hcif_command_status_evt (uint8_t status, BT_HDR *command, void *context);
static void btu_hcif_hardware_error_evt (UINT8 *p);
static void btu_hcif_flush_occured_evt (void);
static void btu_hcif_role_change_evt (UINT8 *p);
static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p);
static void btu_hcif_mode_change_evt (UINT8 *p);
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_pin_code_request_evt (UINT8 *p);
static void btu_hcif_link_key_request_evt (UINT8 *p);
static void btu_hcif_link_key_notification_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
static void btu_hcif_loopback_command_evt (void);
static void btu_hcif_data_buf_overflow_evt (void);
static void btu_hcif_max_slots_changed_evt (void);
static void btu_hcif_read_clock_off_comp_evt (UINT8 *p);
static void btu_hcif_conn_pkt_type_change_evt (void);
static void btu_hcif_qos_violation_evt (UINT8 *p);
static void btu_hcif_page_scan_mode_change_evt (void);
static void btu_hcif_page_scan_rep_mode_chng_evt (void);
static void btu_hcif_esco_connection_comp_evt(UINT8 *p);
static void btu_hcif_esco_connection_chg_evt(UINT8 *p);
/* Simple Pairing Events */
static void btu_hcif_host_support_evt (UINT8 *p);
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_io_cap_request_evt (UINT8 *p);
static void btu_hcif_io_cap_response_evt (UINT8 *p);
static void btu_hcif_user_conf_request_evt (UINT8 *p);
static void btu_hcif_user_passkey_request_evt (UINT8 *p);
static void btu_hcif_user_passkey_notif_evt (UINT8 *p);
static void btu_hcif_keypress_notif_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
#if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE
static void btu_hcif_rem_oob_request_evt (UINT8 *p);
#endif
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_simple_pair_complete_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
static void btu_hcif_enhanced_flush_complete_evt (void);
#endif
#if (BTM_SSR_INCLUDED == TRUE)
static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len);
#endif /* BTM_SSR_INCLUDED == TRUE */
#if BLE_INCLUDED == TRUE
static void btu_ble_ll_conn_complete_evt (UINT8 *p, UINT16 evt_len);
static void btu_ble_process_adv_pkt (UINT8 *p);
static void btu_ble_process_adv_dis(UINT8 *p);
static void btu_ble_read_remote_feat_evt (UINT8 *p);
static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len);
static void btu_ble_ll_get_conn_param_format_err_from_contoller (UINT8 status, UINT16 handle);
#if (SMP_INCLUDED == TRUE)
static void btu_ble_proc_ltk_req (UINT8 *p);
static void btu_hcif_encryption_key_refresh_cmpl_evt (UINT8 *p);
#endif ///SMP_INCLUDED == TRUE
static void btu_ble_data_length_change_evt (UINT8 *p, UINT16 evt_len);
#if (BLE_LLT_INCLUDED == TRUE)
static void btu_ble_rc_param_req_evt(UINT8 *p);
#endif
//#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
static void btu_ble_proc_enhanced_conn_cmpl (UINT8 *p, UINT16 evt_len);
//#endif
#if (BLE_50_FEATURE_SUPPORT == TRUE)
static void btu_ble_phy_update_complete_evt(UINT8 *p);
static void btu_ble_ext_adv_report_evt(UINT8 *p, UINT16 evt_len);
static void btu_ble_periodic_adv_sync_establish_evt(UINT8 *p);
static void btu_ble_periodic_adv_report_evt(UINT8 *p, UINT8 evt_len);
static void btu_ble_periodic_adv_sync_lost_evt(UINT8 *p);
static void btu_ble_scan_timeout_evt(UINT8 *p);
static void btu_ble_adv_set_terminate_evt(UINT8 *p);
static void btu_ble_scan_req_received_evt(UINT8 *p);
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
2018-10-18 09:12:13 -04:00
extern osi_sem_t adv_enable_sem;
extern osi_sem_t adv_data_sem;
extern osi_sem_t adv_param_sem;
extern osi_sem_t scan_enable_sem;
extern osi_sem_t scan_param_sem;
extern uint8_t adv_enable_status;
extern uint8_t adv_data_status;
extern uint8_t adv_param_status;
extern uint8_t scan_enable_status;
extern uint8_t scan_param_status;
#endif
/*******************************************************************************
**
** Function btu_hcif_process_event
**
** Description This function is called when an event is received from
** the Host Controller.
**
** Returns void
**
*******************************************************************************/
void btu_hcif_process_event (UNUSED_ATTR UINT8 controller_id, BT_HDR *p_msg)
{
UINT8 *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
UINT8 hci_evt_code, hci_evt_len;
#if BLE_INCLUDED == TRUE
UINT8 ble_sub_code;
#endif
STREAM_TO_UINT8 (hci_evt_code, p);
STREAM_TO_UINT8 (hci_evt_len, p);
switch (hci_evt_code) {
case HCI_INQUIRY_COMP_EVT:
btu_hcif_inquiry_comp_evt (p);
break;
case HCI_INQUIRY_RESULT_EVT:
btu_hcif_inquiry_result_evt (p);
break;
case HCI_INQUIRY_RSSI_RESULT_EVT:
btu_hcif_inquiry_rssi_result_evt (p);
break;
case HCI_EXTENDED_INQUIRY_RESULT_EVT:
btu_hcif_extended_inquiry_result_evt (p);
break;
case HCI_CONNECTION_COMP_EVT:
btu_hcif_connection_comp_evt (p);
break;
case HCI_CONNECTION_REQUEST_EVT:
btu_hcif_connection_request_evt (p);
break;
case HCI_DISCONNECTION_COMP_EVT:
btu_hcif_disconnection_comp_evt (p);
break;
case HCI_AUTHENTICATION_COMP_EVT:
#if (SMP_INCLUDED == TRUE)
btu_hcif_authentication_comp_evt (p);
#endif ///SMP_INCLUDED == TRUE
break;
case HCI_RMT_NAME_REQUEST_COMP_EVT:
btu_hcif_rmt_name_request_comp_evt (p, hci_evt_len);
break;
case HCI_ENCRYPTION_CHANGE_EVT:
#if (SMP_INCLUDED == TRUE)
btu_hcif_encryption_change_evt (p);
#endif ///SMP_INCLUDED == TRUE
break;
#if BLE_INCLUDED == TRUE
case HCI_ENCRYPTION_KEY_REFRESH_COMP_EVT:
#if (SMP_INCLUDED == TRUE)
btu_hcif_encryption_key_refresh_cmpl_evt(p);
#endif ///SMP_INCLUDED == TRUE
break;
#endif
case HCI_READ_RMT_FEATURES_COMP_EVT:
btu_hcif_read_rmt_features_comp_evt (p);
break;
case HCI_READ_RMT_EXT_FEATURES_COMP_EVT:
btu_hcif_read_rmt_ext_features_comp_evt (p);
break;
case HCI_READ_RMT_VERSION_COMP_EVT:
btu_hcif_read_rmt_version_comp_evt (p);
break;
case HCI_QOS_SETUP_COMP_EVT:
btu_hcif_qos_setup_comp_evt (p);
break;
case HCI_COMMAND_COMPLETE_EVT:
//HCI_TRACE_ERROR("%s should not have received a command complete event. "
// "Someone didn't go through the hci transmit_command function.", __func__);
break;
case HCI_COMMAND_STATUS_EVT:
//HCI_TRACE_ERROR("%s should not have received a command status event. "
// "Someone didn't go through the hci transmit_command function.", __func__);
break;
case HCI_HARDWARE_ERROR_EVT:
btu_hcif_hardware_error_evt (p);
break;
case HCI_FLUSH_OCCURED_EVT:
btu_hcif_flush_occured_evt ();
break;
case HCI_ROLE_CHANGE_EVT:
btu_hcif_role_change_evt (p);
break;
case HCI_NUM_COMPL_DATA_PKTS_EVT:
btu_hcif_num_compl_data_pkts_evt (p);
break;
case HCI_MODE_CHANGE_EVT:
btu_hcif_mode_change_evt (p);
break;
#if (SMP_INCLUDED == TRUE)
case HCI_PIN_CODE_REQUEST_EVT:
btu_hcif_pin_code_request_evt (p);
break;
case HCI_LINK_KEY_REQUEST_EVT:
btu_hcif_link_key_request_evt (p);
break;
case HCI_LINK_KEY_NOTIFICATION_EVT:
btu_hcif_link_key_notification_evt (p);
break;
#endif ///SMP_INCLUDED == TRUE
case HCI_LOOPBACK_COMMAND_EVT:
btu_hcif_loopback_command_evt ();
break;
case HCI_DATA_BUF_OVERFLOW_EVT:
btu_hcif_data_buf_overflow_evt ();
break;
case HCI_MAX_SLOTS_CHANGED_EVT:
btu_hcif_max_slots_changed_evt ();
break;
case HCI_READ_CLOCK_OFF_COMP_EVT:
btu_hcif_read_clock_off_comp_evt (p);
break;
case HCI_CONN_PKT_TYPE_CHANGE_EVT:
btu_hcif_conn_pkt_type_change_evt ();
break;
case HCI_QOS_VIOLATION_EVT:
btu_hcif_qos_violation_evt (p);
break;
case HCI_PAGE_SCAN_MODE_CHANGE_EVT:
btu_hcif_page_scan_mode_change_evt ();
break;
case HCI_PAGE_SCAN_REP_MODE_CHNG_EVT:
btu_hcif_page_scan_rep_mode_chng_evt ();
break;
case HCI_ESCO_CONNECTION_COMP_EVT:
btu_hcif_esco_connection_comp_evt (p);
break;
case HCI_ESCO_CONNECTION_CHANGED_EVT:
btu_hcif_esco_connection_chg_evt (p);
break;
#if (BTM_SSR_INCLUDED == TRUE)
case HCI_SNIFF_SUB_RATE_EVT:
btu_hcif_ssr_evt (p, hci_evt_len);
break;
#endif /* BTM_SSR_INCLUDED == TRUE */
case HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT:
btu_hcif_host_support_evt (p);
break;
#if (SMP_INCLUDED == TRUE)
case HCI_IO_CAPABILITY_REQUEST_EVT:
btu_hcif_io_cap_request_evt (p);
break;
case HCI_IO_CAPABILITY_RESPONSE_EVT:
btu_hcif_io_cap_response_evt (p);
break;
case HCI_USER_CONFIRMATION_REQUEST_EVT:
btu_hcif_user_conf_request_evt (p);
break;
case HCI_USER_PASSKEY_REQUEST_EVT:
btu_hcif_user_passkey_request_evt (p);
break;
#endif ///SMP_INCLUDED == TRUE
#if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE
case HCI_REMOTE_OOB_DATA_REQUEST_EVT:
btu_hcif_rem_oob_request_evt (p);
break;
#endif
#if (SMP_INCLUDED == TRUE)
case HCI_SIMPLE_PAIRING_COMPLETE_EVT:
btu_hcif_simple_pair_complete_evt (p);
break;
case HCI_USER_PASSKEY_NOTIFY_EVT:
btu_hcif_user_passkey_notif_evt (p);
break;
case HCI_KEYPRESS_NOTIFY_EVT:
btu_hcif_keypress_notif_evt (p);
break;
#endif ///SMP_INCLUDED == TRUE
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
case HCI_ENHANCED_FLUSH_COMPLETE_EVT:
btu_hcif_enhanced_flush_complete_evt ();
break;
#endif
#if (BLE_INCLUDED == TRUE)
case HCI_BLE_EVENT:
STREAM_TO_UINT8 (ble_sub_code, p);
HCI_TRACE_DEBUG("BLE HCI(id=%d) event = 0x%02x)", hci_evt_code, ble_sub_code);
switch (ble_sub_code) {
case HCI_BLE_ADV_PKT_RPT_EVT: /* result of inquiry */
btu_ble_process_adv_pkt(p);
break;
case HCI_BLE_ADV_DISCARD_REPORT_EVT:
btu_ble_process_adv_dis(p);
break;
case HCI_BLE_CONN_COMPLETE_EVT:
btu_ble_ll_conn_complete_evt(p, hci_evt_len);
break;
case HCI_BLE_LL_CONN_PARAM_UPD_EVT:
btu_ble_ll_conn_param_upd_evt(p, hci_evt_len);
break;
case HCI_BLE_READ_REMOTE_FEAT_CMPL_EVT:
btu_ble_read_remote_feat_evt(p);
break;
case HCI_BLE_LTK_REQ_EVT: /* received only at slave device */
#if (SMP_INCLUDED == TRUE)
btu_ble_proc_ltk_req(p);
#endif ///SMP_INCLUDED == TRUE
break;
//#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
case HCI_BLE_ENHANCED_CONN_COMPLETE_EVT:
btu_ble_proc_enhanced_conn_cmpl(p, hci_evt_len);
break;
//#endif
#if (BLE_LLT_INCLUDED == TRUE)
case HCI_BLE_RC_PARAM_REQ_EVT:
btu_ble_rc_param_req_evt(p);
break;
#endif
case HCI_BLE_DATA_LENGTH_CHANGE_EVT:
btu_ble_data_length_change_evt(p, hci_evt_len);
break;
#if (BLE_50_FEATURE_SUPPORT == TRUE)
case HCI_BLE_PHY_UPDATE_COMPLETE_EVT:
btu_ble_phy_update_complete_evt(p);
break;
case HCI_BLE_EXT_ADV_REPORT_EVT:
//HCI_TRACE_ERROR("%s, HCI_BLE_EXT_ADV_REPORT_EVT.", __func__);
btu_ble_ext_adv_report_evt(p, hci_evt_len);
break;
case HCI_BLE_PERIOD_ADV_SYNC_ESTAB_EVT:
btu_ble_periodic_adv_sync_establish_evt(p);
break;
case HCI_BLE_PERIOD_ADV_REPORT_EVT:
btu_ble_periodic_adv_report_evt(p, hci_evt_len);
break;
case HCI_BLE_PERIOD_ADV_SYNC_LOST_EVT:
btu_ble_periodic_adv_sync_lost_evt(p);
break;
case HCI_BLE_SCAN_TIMEOUT_EVT:
btu_ble_scan_timeout_evt(p);
break;
case HCI_BLE_ADV_SET_TERMINATED_EVT:
btu_ble_adv_set_terminate_evt(p);
break;
case HCI_BLE_SCAN_REQ_RECEIVED_EVT:
btu_ble_scan_req_received_evt(p);
break;
case HCI_BLE_CHANNEL_SELECT_ALG:
break;
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
}
break;
#endif /* BLE_INCLUDED */
case HCI_VENDOR_SPECIFIC_EVT:
btm_vendor_specific_evt (p, hci_evt_len);
break;
}
}
/*******************************************************************************
**
** Function btu_hcif_send_cmd
**
** Description This function is called to send commands to the Host Controller.
**
** Returns void
**
*******************************************************************************/
void btu_hcif_send_cmd (UNUSED_ATTR UINT8 controller_id, BT_HDR *p_buf)
{
if (!p_buf) {
HCI_TRACE_ERROR("%s p_buf is NULL", __func__);
return;
}
uint16_t opcode;
uint8_t *stream = p_buf->data + p_buf->offset;
void *vsc_callback = NULL;
STREAM_TO_UINT16(opcode, stream);
// Eww...horrible hackery here
/* If command was a VSC, then extract command_complete callback */
if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC
#if BLE_INCLUDED == TRUE
|| (opcode == HCI_BLE_RAND)
|| (opcode == HCI_BLE_ENCRYPT)
#endif
) {
vsc_callback = *((void **)(p_buf + 1));
}
hci_layer_get_interface()->transmit_command(
p_buf,
btu_hcif_command_complete_evt,
btu_hcif_command_status_evt,
vsc_callback);
#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
btu_check_bt_sleep ();
#endif
}
#if (BLE_50_FEATURE_SUPPORT == TRUE)
UINT8 btu_hcif_send_cmd_sync (UINT8 controller_id, BT_HDR *p_buf)
{
if (!p_buf) {
HCI_TRACE_ERROR("%s p_buf is NULL", __func__);
return HCI_ERR_ILLEGAL_PARAMETER_FMT;
}
BlE_SYNC *sync_info = btsnd_hcic_ble_get_sync_info();
if((sync_info == NULL) || (sync_info->sync_sem == NULL)) {
HCI_TRACE_ERROR("%s sync_info error", __func__);
return HCI_ERR_ILLEGAL_PARAMETER_FMT;
}
uint16_t opcode;
uint8_t *stream = p_buf->data + p_buf->offset;
void *vsc_callback = NULL;
STREAM_TO_UINT16(opcode, stream);
sync_info->opcode = opcode;
// Eww...horrible hackery here
/* If command was a VSC, then extract command_complete callback */
if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC
#if BLE_INCLUDED == TRUE
|| (opcode == HCI_BLE_RAND)
|| (opcode == HCI_BLE_ENCRYPT)
#endif
) {
vsc_callback = *((void **)(p_buf + 1));
}
hci_layer_get_interface()->transmit_command(
p_buf,
btu_hcif_command_complete_evt,
btu_hcif_command_status_evt,
vsc_callback);
osi_sem_take(&sync_info->sync_sem, OSI_SEM_MAX_TIMEOUT);
#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
btu_check_bt_sleep ();
#endif
return btsnd_hcic_ble_get_status();
}
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
/*******************************************************************************
**
** Function btu_hcif_send_host_rdy_for_data
**
** Description This function is called to check if it can send commands
** to the Host Controller. It may be passed the address of
** a packet to send.
**
** Returns void
**
*******************************************************************************/
void btu_hcif_send_host_rdy_for_data(void)
{
UINT16 num_pkts[MAX_L2CAP_LINKS + 4]; /* 3 SCO connections */
UINT16 handles[MAX_L2CAP_LINKS + 4];
UINT8 num_ents;
/* Get the L2CAP numbers */
num_ents = l2c_link_pkts_rcvd (num_pkts, handles);
/* Get the SCO numbers */
/* No SCO for now ?? */
if (num_ents) {
btsnd_hcic_host_num_xmitted_pkts (num_ents, handles, num_pkts);
}
}
/*******************************************************************************
**
** Function btu_hcif_inquiry_comp_evt
**
** Description Process event HCI_INQUIRY_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_inquiry_comp_evt (UINT8 *p)
{
UINT8 status;
STREAM_TO_UINT8 (status, p);
/* Tell inquiry processing that we are done */
btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK);
}
/*******************************************************************************
**
** Function btu_hcif_inquiry_result_evt
**
** Description Process event HCI_INQUIRY_RESULT_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_inquiry_result_evt (UINT8 *p)
{
/* Store results in the cache */
btm_process_inq_results (p, BTM_INQ_RESULT_STANDARD);
}
/*******************************************************************************
**
** Function btu_hcif_inquiry_rssi_result_evt
**
** Description Process event HCI_INQUIRY_RSSI_RESULT_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p)
{
/* Store results in the cache */
btm_process_inq_results (p, BTM_INQ_RESULT_WITH_RSSI);
}
/*******************************************************************************
**
** Function btu_hcif_extended_inquiry_result_evt
**
** Description Process event HCI_EXTENDED_INQUIRY_RESULT_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_extended_inquiry_result_evt (UINT8 *p)
{
/* Store results in the cache */
btm_process_inq_results (p, BTM_INQ_RESULT_EXTENDED);
}
/*******************************************************************************
**
** Function btu_hcif_connection_comp_evt
**
** Description Process event HCI_CONNECTION_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_connection_comp_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
BD_ADDR bda;
UINT8 link_type;
#if SMP_INCLUDED == TRUE
UINT8 enc_mode;
#endif ///SMP_INCLUDED == TRUE
#if BTM_SCO_INCLUDED == TRUE
tBTM_ESCO_DATA esco_data;
#endif
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_BDADDR (bda, p);
STREAM_TO_UINT8 (link_type, p);
#if (SMP_INCLUDED == TRUE)
STREAM_TO_UINT8 (enc_mode, p);
#endif ///SMP_INCLUDED == TRUE
handle = HCID_GET_HANDLE (handle);
if (link_type == HCI_LINK_TYPE_ACL) {
#if (SMP_INCLUDED == TRUE)
btm_sec_connected (bda, handle, status, enc_mode);
#endif ///SMP_INCLUDED == TRUE
l2c_link_hci_conn_comp (status, handle, bda);
}
#if BTM_SCO_INCLUDED == TRUE
else {
memset(&esco_data, 0, sizeof(tBTM_ESCO_DATA));
/* esco_data.link_type = HCI_LINK_TYPE_SCO; already zero */
memcpy (esco_data.bd_addr, bda, BD_ADDR_LEN);
btm_sco_connected (status, bda, handle, &esco_data);
}
#endif /* BTM_SCO_INCLUDED */
}
/*******************************************************************************
**
** Function btu_hcif_connection_request_evt
**
** Description Process event HCI_CONNECTION_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_connection_request_evt (UINT8 *p)
{
BD_ADDR bda;
DEV_CLASS dc;
UINT8 link_type;
STREAM_TO_BDADDR (bda, p);
STREAM_TO_DEVCLASS (dc, p);
STREAM_TO_UINT8 (link_type, p);
/* Pass request to security manager to check connect filters before */
/* passing request to l2cap */
if (link_type == HCI_LINK_TYPE_ACL) {
#if (SMP_INCLUDED == TRUE)
btm_sec_conn_req (bda, dc);
#endif ///SMP_INCLUDED == TRUE
}
#if BTM_SCO_INCLUDED == TRUE
else {
btm_sco_conn_req (bda, dc, link_type);
}
#endif /* BTM_SCO_INCLUDED */
}
/*******************************************************************************
**
** Function btu_hcif_disconnection_comp_evt
**
** Description Process event HCI_DISCONNECTION_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_disconnection_comp_evt (UINT8 *p)
{
UINT16 handle;
UINT8 reason;
++p;
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (reason, p);
handle = HCID_GET_HANDLE (handle);
if (reason != HCI_ERR_PEER_USER && reason != HCI_ERR_CONN_CAUSE_LOCAL_HOST) {
HCI_TRACE_WARNING("DiscCmpl evt: hdl=%d, rsn=0x%x", handle, reason);
}
#if BTM_SCO_INCLUDED == TRUE
/* If L2CAP doesn't know about it, send it to SCO */
if (!l2c_link_hci_disc_comp (handle, reason)) {
btm_sco_removed (handle, reason);
}
#else
l2c_link_hci_disc_comp (handle, reason);
#endif /* BTM_SCO_INCLUDED */
#if (SMP_INCLUDED == TRUE)
/* Notify security manager */
btm_sec_disconnected (handle, reason);
#endif ///SMP_INCLUDED == TRUE
}
/*******************************************************************************
**
** Function btu_hcif_authentication_comp_evt
**
** Description Process event HCI_AUTHENTICATION_COMP_EVT
**
** Returns void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_authentication_comp_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
btm_sec_auth_complete (handle, status);
}
#endif ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function btu_hcif_rmt_name_request_comp_evt
**
** Description Process event HCI_RMT_NAME_REQUEST_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len)
{
UINT8 status;
BD_ADDR bd_addr;
STREAM_TO_UINT8 (status, p);
STREAM_TO_BDADDR (bd_addr, p);
evt_len -= (1 + BD_ADDR_LEN);
btm_process_remote_name (bd_addr, p, evt_len, status);
#if (SMP_INCLUDED == TRUE)
btm_sec_rmt_name_request_complete (bd_addr, p, status);
#endif ///SMP_INCLUDED == TRUE
}
/*******************************************************************************
**
** Function btu_hcif_encryption_change_evt
**
** Description Process event HCI_ENCRYPTION_CHANGE_EVT
**
** Returns void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_encryption_change_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
UINT8 encr_enable;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (encr_enable, p);
btm_acl_encrypt_change (handle, status, encr_enable);
btm_sec_encrypt_change (handle, status, encr_enable);
}
#endif ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function btu_hcif_read_rmt_features_comp_evt
**
** Description Process event HCI_READ_RMT_FEATURES_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p)
{
btm_read_remote_features_complete(p);
}
/*******************************************************************************
**
** Function btu_hcif_read_rmt_ext_features_comp_evt
**
** Description Process event HCI_READ_RMT_EXT_FEATURES_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p)
{
UINT8 *p_cur = p;
UINT8 status;
UINT16 handle;
STREAM_TO_UINT8 (status, p_cur);
if (status == HCI_SUCCESS) {
btm_read_remote_ext_features_complete(p);
} else {
STREAM_TO_UINT16 (handle, p_cur);
btm_read_remote_ext_features_failed(status, handle);
}
}
/*******************************************************************************
**
** Function btu_hcif_read_rmt_version_comp_evt
**
** Description Process event HCI_READ_RMT_VERSION_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p)
{
btm_read_remote_version_complete (p);
}
/*******************************************************************************
**
** Function btu_hcif_qos_setup_comp_evt
**
** Description Process event HCI_QOS_SETUP_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_qos_setup_comp_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
FLOW_SPEC flow;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (flow.qos_flags, p);
STREAM_TO_UINT8 (flow.service_type, p);
STREAM_TO_UINT32 (flow.token_rate, p);
STREAM_TO_UINT32 (flow.peak_bandwidth, p);
STREAM_TO_UINT32 (flow.latency, p);
STREAM_TO_UINT32 (flow.delay_variation, p);
btm_qos_setup_complete(status, handle, &flow);
}
/*******************************************************************************
**
** Function btu_hcif_esco_connection_comp_evt
**
** Description Process event HCI_ESCO_CONNECTION_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_esco_connection_comp_evt (UINT8 *p)
{
#if BTM_SCO_INCLUDED == TRUE
tBTM_ESCO_DATA data;
UINT16 handle;
BD_ADDR bda;
UINT8 status;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_BDADDR (bda, p);
STREAM_TO_UINT8 (data.link_type, p);
STREAM_TO_UINT8 (data.tx_interval, p);
STREAM_TO_UINT8 (data.retrans_window, p);
STREAM_TO_UINT16 (data.rx_pkt_len, p);
STREAM_TO_UINT16 (data.tx_pkt_len, p);
STREAM_TO_UINT8 (data.air_mode, p);
memcpy (data.bd_addr, bda, BD_ADDR_LEN);
btm_sco_connected (status, bda, handle, &data);
#endif
}
/*******************************************************************************
**
** Function btu_hcif_esco_connection_chg_evt
**
** Description Process event HCI_ESCO_CONNECTION_CHANGED_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_esco_connection_chg_evt (UINT8 *p)
{
#if BTM_SCO_INCLUDED == TRUE
UINT16 handle;
UINT16 tx_pkt_len;
UINT16 rx_pkt_len;
UINT8 status;
UINT8 tx_interval;
UINT8 retrans_window;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (tx_interval, p);
STREAM_TO_UINT8 (retrans_window, p);
STREAM_TO_UINT16 (rx_pkt_len, p);
STREAM_TO_UINT16 (tx_pkt_len, p);
btm_esco_proc_conn_chg (status, handle, tx_interval, retrans_window,
rx_pkt_len, tx_pkt_len);
#endif
}
/*******************************************************************************
**
** Function btu_hcif_hdl_command_complete
**
** Description Handle command complete event
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_hdl_command_complete (UINT16 opcode, UINT8 *p, UINT16 evt_len,
void *p_cplt_cback)
{
switch (opcode) {
case HCI_INQUIRY_CANCEL:
/* Tell inquiry processing that we are done */
btm_process_cancel_complete(HCI_SUCCESS, BTM_BR_INQUIRY_MASK);
break;
case HCI_SET_EVENT_FILTER:
btm_event_filter_complete (p);
break;
case HCI_DELETE_STORED_LINK_KEY:
btm_delete_stored_link_key_complete (p);
break;
case HCI_READ_LOCAL_NAME:
btm_read_local_name_complete (p, evt_len);
break;
case HCI_GET_LINK_QUALITY:
btm_read_link_quality_complete (p);
break;
case HCI_READ_RSSI:
btm_read_rssi_complete (p);
break;
case HCI_READ_TRANSMIT_POWER_LEVEL:
btm_read_tx_power_complete(p, FALSE);
break;
case HCI_CREATE_CONNECTION_CANCEL:
btm_create_conn_cancel_complete(p);
break;
case HCI_READ_LOCAL_OOB_DATA:
#if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE
btm_read_local_oob_complete(p);
#endif
break;
case HCI_READ_INQ_TX_POWER_LEVEL:
btm_read_linq_tx_power_complete (p);
break;
#if (CLASSIC_BT_INCLUDED == TRUE)
case HCI_SET_AFH_CHANNELS:
btm_set_afh_channels_complete(p);
break;
#endif
#if (BLE_INCLUDED == TRUE)
/* BLE Commands Complete*/
case HCI_BLE_SET_HOST_CHNL_CLASS:
btm_ble_set_channels_complete(p);
break;
case HCI_BLE_ADD_WHITE_LIST:
btm_ble_add_2_white_list_complete(*p);
break;
case HCI_BLE_CLEAR_WHITE_LIST:
btm_ble_clear_white_list_complete(p, evt_len);
break;
2018-05-03 08:22:08 -04:00
case HCI_BLE_WRITE_ADV_PARAMS: {
uint8_t status;
STREAM_TO_UINT8 (status, p);
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("hci write adv params error 0x%x", status);
}
break;
}
case HCI_BLE_RC_PARAM_REQ_REPLY: {
uint8_t status;
STREAM_TO_UINT8 (status, p);
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("hci connection params reply command error 0x%x", status);
}
break;
}
case HCI_BLE_RC_PARAM_REQ_NEG_REPLY: {
uint8_t status;
STREAM_TO_UINT8 (status, p);
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("hci connection params neg reply command error %x", status);
}
break;
}
case HCI_BLE_REMOVE_WHITE_LIST:
btm_ble_remove_from_white_list_complete(p, evt_len);
break;
case HCI_BLE_RAND:
case HCI_BLE_ENCRYPT:
#if (SMP_INCLUDED == TRUE)
btm_ble_rand_enc_complete (p, opcode, (tBTM_RAND_ENC_CB *)p_cplt_cback);
#endif ///SMP_INCLUDED == TRUE
break;
case HCI_BLE_READ_ADV_CHNL_TX_POWER:
btm_read_tx_power_complete(p, TRUE);
break;
case HCI_BLE_WRITE_ADV_ENABLE:
btm_ble_write_adv_enable_complete(p);
break;
case HCI_BLE_CREATE_LL_CONN:
btm_ble_create_ll_conn_complete(*p);
break;
case HCI_BLE_TRANSMITTER_TEST:
case HCI_BLE_RECEIVER_TEST:
case HCI_BLE_TEST_END:
btm_ble_test_command_complete(p);
break;
case HCI_BLE_CREATE_CONN_CANCEL:
btm_ble_create_conn_cancel_complete(p);
break;
#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
case HCI_BLE_ADD_DEV_RESOLVING_LIST:
btm_ble_add_resolving_list_entry_complete(p, evt_len);
break;
case HCI_BLE_RM_DEV_RESOLVING_LIST:
btm_ble_remove_resolving_list_entry_complete(p, evt_len);
break;
case HCI_BLE_CLEAR_RESOLVING_LIST:
btm_ble_clear_resolving_list_complete(p, evt_len);
break;
case HCI_BLE_READ_RESOLVABLE_ADDR_PEER:
btm_ble_read_resolving_list_entry_complete(p, evt_len);
break;
case HCI_BLE_READ_RESOLVABLE_ADDR_LOCAL:
case HCI_BLE_SET_ADDR_RESOLUTION_ENABLE:
case HCI_BLE_SET_RAND_PRIV_ADDR_TIMOUT:
break;
#if (BLE_50_FEATURE_SUPPORT == TRUE)
case HCI_BLE_SET_EXT_ADV_PARAM:
case HCI_BLE_SET_EXT_ADV_DATA:
case HCI_BLE_SET_EXT_SCAN_RSP_DATA:
case HCI_BLE_SET_EXT_ADV_ENABLE: {
uint8_t status;
STREAM_TO_UINT8 (status, p);
HCI_TRACE_EVENT("%s opcode 0x%x status 0x%x", __func__, opcode, status);
break;
}
case HCI_BLE_READ_PHY: {
uint8_t status;
uint16_t conn_handle;
uint8_t tx_phy;
uint8_t rx_phy;
STREAM_TO_UINT8(status, p);
STREAM_TO_UINT16(conn_handle, p);
STREAM_TO_UINT8(tx_phy, p);
STREAM_TO_UINT8(rx_phy, p);
btm_read_phy_callback(status, conn_handle, tx_phy, rx_phy);
break;
}
case HCI_BLE_ENH_RX_TEST:
case HCI_BLE_ENH_TX_TEST:
btm_ble_test_command_complete(p);
break;
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
#endif
#endif /* (BLE_INCLUDED == TRUE) */
2018-05-03 08:22:08 -04:00
default: {
if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) {
btm_vsc_complete (p, opcode, evt_len, (tBTM_CMPL_CB *)p_cplt_cback);
}
2018-05-03 08:22:08 -04:00
uint8_t status;
STREAM_TO_UINT8 (status, p);
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("CC evt: op=0x%x, status=0x%x", opcode, status);
2018-05-03 08:22:08 -04:00
}
break;
}
2018-05-03 08:22:08 -04:00
}
}
/*******************************************************************************
**
** Function btu_hcif_command_complete_evt
**
** Description Process event HCI_COMMAND_COMPLETE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_command_complete_evt_on_task(BT_HDR *event)
{
command_complete_hack_t *hack = (command_complete_hack_t *)&event->data[0];
command_opcode_t opcode;
uint8_t *stream = hack->response->data + hack->response->offset + 3; // 2 to skip the event headers, 1 to skip the command credits
STREAM_TO_UINT16(opcode, stream);
btu_hcif_hdl_command_complete(
opcode,
stream,
hack->response->len - 5, // 3 for the command complete headers, 2 for the event headers
hack->context);
osi_free(hack->response);
osi_free(event);
}
static void btu_hcif_command_complete_evt(BT_HDR *response, void *context)
{
2018-10-18 09:12:13 -04:00
#if (BLE_INCLUDED == TRUE)
command_opcode_t opcode;
uint8_t *stream = response->data + response->offset + 3;
STREAM_TO_UINT16(opcode, stream);
switch (opcode) {
case HCI_BLE_WRITE_ADV_DATA:
adv_data_status = *stream;
osi_sem_give(&adv_data_sem);
break;
case HCI_BLE_WRITE_SCAN_RSP_DATA:
adv_data_status = *stream;
osi_sem_give(&adv_data_sem);
break;
case HCI_BLE_WRITE_ADV_ENABLE: {
adv_enable_status = *stream;
osi_sem_give(&adv_enable_sem);
break;
}
case HCI_BLE_WRITE_ADV_PARAMS:
adv_param_status = *stream;
osi_sem_give(&adv_param_sem);
break;
case HCI_BLE_WRITE_SCAN_PARAMS:
scan_param_status = *stream;
osi_sem_give(&scan_param_sem);
break;
case HCI_BLE_WRITE_SCAN_ENABLE:
scan_enable_status = *stream;
osi_sem_give(&scan_enable_sem);
break;
default:
break;
}
#endif
BT_HDR *event = osi_calloc(sizeof(BT_HDR) + sizeof(command_complete_hack_t));
command_complete_hack_t *hack = (command_complete_hack_t *)&event->data[0];
#if (BLE_50_FEATURE_SUPPORT == TRUE)
UINT8 status = 0;
stream = response->data + response->offset + 3 + 2; // 2 to skip the event headers, 1 to skip the command credits, 2 to opcode.
STREAM_TO_UINT8(status, stream);
btsnd_hci_ble_set_status(status);
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
HCI_TRACE_DEBUG("btu_hcif_command_complete_evt\n");
hack->callback = btu_hcif_command_complete_evt_on_task;
hack->response = response;
hack->context = context;
event->event = BTU_POST_TO_TASK_NO_GOOD_HORRIBLE_HACK;
btu_task_post(SIG_BTU_HCI_MSG, event, OSI_THREAD_MAX_TIMEOUT);
}
/*******************************************************************************
**
** Function btu_hcif_hdl_command_status
**
** Description Handle a command status event
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_hdl_command_status (UINT16 opcode, UINT8 status, UINT8 *p_cmd,
void *p_vsc_status_cback)
{
BD_ADDR bd_addr;
UINT16 handle;
#if BTM_SCO_INCLUDED == TRUE
tBTM_ESCO_DATA esco_data;
#endif
switch (opcode) {
case HCI_EXIT_SNIFF_MODE:
case HCI_EXIT_PARK_MODE:
#if BTM_SCO_WAKE_PARKED_LINK == TRUE
if (status != HCI_SUCCESS) {
/* Allow SCO initiation to continue if waiting for change mode event */
if (p_cmd != NULL) {
p_cmd++; /* bypass length field */
STREAM_TO_UINT16 (handle, p_cmd);
btm_sco_chk_pend_unpark (status, handle);
}
}
#endif
/* Case Falls Through */
case HCI_HOLD_MODE:
case HCI_SNIFF_MODE:
case HCI_PARK_MODE:
btm_pm_proc_cmd_status(status);
break;
#if (BLE_50_FEATURE_SUPPORT == TRUE)
case HCI_BLE_PERIOD_ADV_CREATE_SYNC:
{
uint8_t btm_status = BTM_SUCCESS;
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("CS evt: LE PA CreateSync status=0x%x", status);
btm_status = BTM_ILLEGAL_VALUE;
}
btm_create_sync_callback(btm_status);
break;
}
case HCI_BLE_SET_PHY:
{
uint8_t btm_status = BTM_SUCCESS;
if(status != HCI_SUCCESS) {
HCI_TRACE_ERROR("CS evt: LE SetPhy status=0x%x", status);
btm_status = BTM_ILLEGAL_VALUE;
}
btm_set_phy_callback(btm_status);
break;
}
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
default:
/* If command failed to start, we may need to tell BTM */
if (status != HCI_SUCCESS) {
switch (opcode) {
case HCI_INQUIRY:
/* Tell inquiry processing that we are done */
btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK);
break;
case HCI_RMT_NAME_REQUEST:
/* Tell inquiry processing that we are done */
btm_process_remote_name (NULL, NULL, 0, status);
#if (SMP_INCLUDED == TRUE)
btm_sec_rmt_name_request_complete (NULL, NULL, status);
#endif ///SMP_INCLUDED == TRUE
break;
case HCI_QOS_SETUP_COMP_EVT:
/* Tell qos setup that we are done */
btm_qos_setup_complete(status, 0, NULL);
break;
case HCI_SWITCH_ROLE:
/* Tell BTM that the command failed */
/* read bd addr out of stored command */
if (p_cmd != NULL) {
p_cmd++;
STREAM_TO_BDADDR (bd_addr, p_cmd);
btm_acl_role_changed(status, bd_addr, BTM_ROLE_UNDEFINED);
} else {
btm_acl_role_changed(status, NULL, BTM_ROLE_UNDEFINED);
}
l2c_link_role_changed (NULL, BTM_ROLE_UNDEFINED, HCI_ERR_COMMAND_DISALLOWED);
break;
case HCI_CREATE_CONNECTION:
/* read bd addr out of stored command */
if (p_cmd != NULL) {
p_cmd++;
STREAM_TO_BDADDR (bd_addr, p_cmd);
#if (SMP_INCLUDED == TRUE)
btm_sec_connected (bd_addr, HCI_INVALID_HANDLE, status, 0);
#endif ///SMP_INCLUDED == TRUE
l2c_link_hci_conn_comp (status, HCI_INVALID_HANDLE, bd_addr);
}
break;
case HCI_READ_RMT_EXT_FEATURES:
if (p_cmd != NULL) {
p_cmd++; /* skip command length */
STREAM_TO_UINT16 (handle, p_cmd);
} else {
handle = HCI_INVALID_HANDLE;
}
btm_read_remote_ext_features_failed(status, handle);
break;
case HCI_AUTHENTICATION_REQUESTED:
#if (SMP_INCLUDED == TRUE)
/* Device refused to start authentication. That should be treated as authentication failure. */
btm_sec_auth_complete (BTM_INVALID_HCI_HANDLE, status);
#endif ///SMP_INCLUDED == TRUE
break;
case HCI_SET_CONN_ENCRYPTION:
#if (SMP_INCLUDED == TRUE)
/* Device refused to start encryption. That should be treated as encryption failure. */
btm_sec_encrypt_change (BTM_INVALID_HCI_HANDLE, status, FALSE);
#endif ///SMP_INCLUDED == TRUE
break;
#if BLE_INCLUDED == TRUE
case HCI_BLE_CREATE_LL_CONN:
btm_ble_create_ll_conn_complete(status);
break;
case HCI_BLE_UPD_LL_CONN_PARAMS:
if (p_cmd != NULL){
p_cmd++;
STREAM_TO_UINT16 (handle, p_cmd);
btu_ble_ll_get_conn_param_format_err_from_contoller(status, handle);
}
break;
#endif
#if BTM_SCO_INCLUDED == TRUE
case HCI_SETUP_ESCO_CONNECTION:
/* read handle out of stored command */
if (p_cmd != NULL) {
p_cmd++;
STREAM_TO_UINT16 (handle, p_cmd);
/* Determine if initial connection failed or is a change of setup */
if (btm_is_sco_active(handle)) {
btm_esco_proc_conn_chg (status, handle, 0, 0, 0, 0);
} else {
btm_sco_connected (status, NULL, handle, &esco_data);
}
}
break;
#endif
/* This is commented out until an upper layer cares about returning event
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
case HCI_ENHANCED_FLUSH:
break;
#endif
*/
default:
if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) {
btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback);
}
break;
}
} else {
if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC) {
btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback);
}
}
}
}
/*******************************************************************************
**
** Function btu_hcif_command_status_evt
**
** Description Process event HCI_COMMAND_STATUS_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_command_status_evt_on_task(BT_HDR *event)
{
command_status_hack_t *hack = (command_status_hack_t *)&event->data[0];
command_opcode_t opcode;
uint8_t *stream = hack->command->data + hack->command->offset;
STREAM_TO_UINT16(opcode, stream);
btu_hcif_hdl_command_status(
opcode,
hack->status,
stream,
hack->context);
osi_free(hack->command);
osi_free(event);
}
static void btu_hcif_command_status_evt(uint8_t status, BT_HDR *command, void *context)
{
BT_HDR *event = osi_calloc(sizeof(BT_HDR) + sizeof(command_status_hack_t));
command_status_hack_t *hack = (command_status_hack_t *)&event->data[0];
hack->callback = btu_hcif_command_status_evt_on_task;
hack->status = status;
hack->command = command;
hack->context = context;
event->event = BTU_POST_TO_TASK_NO_GOOD_HORRIBLE_HACK;
btu_task_post(SIG_BTU_HCI_MSG, event, OSI_THREAD_MAX_TIMEOUT);
}
/*******************************************************************************
**
** Function btu_hcif_hardware_error_evt
**
** Description Process event HCI_HARDWARE_ERROR_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_hardware_error_evt (UINT8 *p)
{
HCI_TRACE_ERROR("Ctlr H/w error event - code:0x%x\n", *p);
/* If anyone wants device status notifications, give him one. */
btm_report_device_status (BTM_DEV_STATUS_DOWN);
/* Reset the controller */
if (BTM_IsDeviceUp()) {
BTM_DeviceReset (NULL);
}
}
/*******************************************************************************
**
** Function btu_hcif_flush_occured_evt
**
** Description Process event HCI_FLUSH_OCCURED_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_flush_occured_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_role_change_evt
**
** Description Process event HCI_ROLE_CHANGE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_role_change_evt (UINT8 *p)
{
UINT8 status;
BD_ADDR bda;
UINT8 role;
STREAM_TO_UINT8 (status, p);
STREAM_TO_BDADDR (bda, p);
STREAM_TO_UINT8 (role, p);
l2c_link_role_changed (bda, role, status);
btm_acl_role_changed(status, bda, role);
}
/*******************************************************************************
**
** Function btu_hcif_num_compl_data_pkts_evt
**
** Description Process event HCI_NUM_COMPL_DATA_PKTS_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p)
{
/* Process for L2CAP and SCO */
l2c_link_process_num_completed_pkts (p);
/* Send on to SCO */
#if (BTM_SCO_HCI_INCLUDED == TRUE) && (BTM_SCO_INCLUDED == TRUE)
btm_sco_process_num_completed_pkts (p);
#endif
}
/*******************************************************************************
**
** Function btu_hcif_mode_change_evt
**
** Description Process event HCI_MODE_CHANGE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_mode_change_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
UINT8 current_mode;
UINT16 interval;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (current_mode, p);
STREAM_TO_UINT16 (interval, p);
#if BTM_SCO_WAKE_PARKED_LINK == TRUE
btm_sco_chk_pend_unpark (status, handle);
#endif
btm_pm_proc_mode_change (status, handle, current_mode, interval);
/*
#if (HID_DEV_INCLUDED == TRUE) && (HID_DEV_PM_INCLUDED == TRUE)
hidd_pm_proc_mode_change( status, current_mode, interval ) ;
#endif
*/
}
/*******************************************************************************
**
** Function btu_hcif_ssr_evt
**
** Description Process event HCI_SNIFF_SUB_RATE_EVT
**
** Returns void
**
*******************************************************************************/
#if (BTM_SSR_INCLUDED == TRUE)
static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len)
{
btm_pm_proc_ssr_evt(p, evt_len);
}
#endif
/*******************************************************************************
**
** Function btu_hcif_pin_code_request_evt
**
** Description Process event HCI_PIN_CODE_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_pin_code_request_evt (UINT8 *p)
{
#if (CLASSIC_BT_INCLUDED == TRUE)
BD_ADDR bda;
STREAM_TO_BDADDR (bda, p);
/* Tell L2CAP that there was a PIN code request, */
/* it may need to stretch timeouts */
l2c_pin_code_request (bda);
btm_sec_pin_code_request (bda);
#endif ///CLASSIC_BT_INCLUDED == TRUE
}
/*******************************************************************************
**
** Function btu_hcif_link_key_request_evt
**
** Description Process event HCI_LINK_KEY_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_link_key_request_evt (UINT8 *p)
{
BD_ADDR bda;
STREAM_TO_BDADDR (bda, p);
btm_sec_link_key_request (bda);
}
/*******************************************************************************
**
** Function btu_hcif_link_key_notification_evt
**
** Description Process event HCI_LINK_KEY_NOTIFICATION_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_link_key_notification_evt (UINT8 *p)
{
BD_ADDR bda;
LINK_KEY key;
UINT8 key_type;
STREAM_TO_BDADDR (bda, p);
STREAM_TO_ARRAY16 (key, p);
STREAM_TO_UINT8 (key_type, p);
btm_sec_link_key_notification (bda, key, key_type);
}
#endif ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function btu_hcif_loopback_command_evt
**
** Description Process event HCI_LOOPBACK_COMMAND_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_loopback_command_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_data_buf_overflow_evt
**
** Description Process event HCI_DATA_BUF_OVERFLOW_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_data_buf_overflow_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_max_slots_changed_evt
**
** Description Process event HCI_MAX_SLOTS_CHANGED_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_max_slots_changed_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_read_clock_off_comp_evt
**
** Description Process event HCI_READ_CLOCK_OFF_COMP_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_read_clock_off_comp_evt (UINT8 *p)
{
UINT8 status;
UINT16 handle;
UINT16 clock_offset;
STREAM_TO_UINT8 (status, p);
/* If failed to get clock offset just drop the result */
if (status != HCI_SUCCESS) {
return;
}
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT16 (clock_offset, p);
handle = HCID_GET_HANDLE (handle);
btm_process_clk_off_comp_evt (handle, clock_offset);
btm_sec_update_clock_offset (handle, clock_offset);
}
/*******************************************************************************
**
** Function btu_hcif_conn_pkt_type_change_evt
**
** Description Process event HCI_CONN_PKT_TYPE_CHANGE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_conn_pkt_type_change_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_qos_violation_evt
**
** Description Process event HCI_QOS_VIOLATION_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_qos_violation_evt (UINT8 *p)
{
UINT16 handle;
STREAM_TO_UINT16 (handle, p);
handle = HCID_GET_HANDLE (handle);
l2c_link_hci_qos_violation (handle);
}
/*******************************************************************************
**
** Function btu_hcif_page_scan_mode_change_evt
**
** Description Process event HCI_PAGE_SCAN_MODE_CHANGE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_page_scan_mode_change_evt (void)
{
}
/*******************************************************************************
**
** Function btu_hcif_page_scan_rep_mode_chng_evt
**
** Description Process event HCI_PAGE_SCAN_REP_MODE_CHNG_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_page_scan_rep_mode_chng_evt (void)
{
}
/**********************************************
** Simple Pairing Events
***********************************************/
/*******************************************************************************
**
** Function btu_hcif_host_support_evt
**
** Description Process event HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_host_support_evt (UINT8 *p)
{
btm_sec_rmt_host_support_feat_evt(p);
}
/*******************************************************************************
**
** Function btu_hcif_io_cap_request_evt
**
** Description Process event HCI_IO_CAPABILITY_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_io_cap_request_evt (UINT8 *p)
{
btm_io_capabilities_req(p);
}
/*******************************************************************************
**
** Function btu_hcif_io_cap_response_evt
**
** Description Process event HCI_IO_CAPABILITY_RESPONSE_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_io_cap_response_evt (UINT8 *p)
{
btm_io_capabilities_rsp(p);
}
/*******************************************************************************
**
** Function btu_hcif_user_conf_request_evt
**
** Description Process event HCI_USER_CONFIRMATION_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_user_conf_request_evt (UINT8 *p)
{
btm_proc_sp_req_evt(BTM_SP_CFM_REQ_EVT, p);
}
/*******************************************************************************
**
** Function btu_hcif_user_passkey_request_evt
**
** Description Process event HCI_USER_PASSKEY_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_user_passkey_request_evt (UINT8 *p)
{
btm_proc_sp_req_evt(BTM_SP_KEY_REQ_EVT, p);
}
/*******************************************************************************
**
** Function btu_hcif_user_passkey_notif_evt
**
** Description Process event HCI_USER_PASSKEY_NOTIFY_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_user_passkey_notif_evt (UINT8 *p)
{
btm_proc_sp_req_evt(BTM_SP_KEY_NOTIF_EVT, p);
}
/*******************************************************************************
**
** Function btu_hcif_keypress_notif_evt
**
** Description Process event HCI_KEYPRESS_NOTIFY_EVT
**
** Returns void
**
*******************************************************************************/
static void btu_hcif_keypress_notif_evt (UINT8 *p)
{
btm_keypress_notif_evt(p);
}
#endif ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function btu_hcif_rem_oob_request_evt
**
** Description Process event HCI_REMOTE_OOB_DATA_REQUEST_EVT
**
** Returns void
**
*******************************************************************************/
#if BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE
static void btu_hcif_rem_oob_request_evt (UINT8 *p)
{
btm_rem_oob_req(p);
}
#endif
/*******************************************************************************
**
** Function btu_hcif_simple_pair_complete_evt
**
** Description Process event HCI_SIMPLE_PAIRING_COMPLETE_EVT
**
** Returns void
**
*******************************************************************************/
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_simple_pair_complete_evt (UINT8 *p)
{
btm_simple_pair_complete(p);
}
#endif ///SMP_INCLUDED == TRUE
/*******************************************************************************
**
** Function btu_hcif_enhanced_flush_complete_evt
**
** Description Process event HCI_ENHANCED_FLUSH_COMPLETE_EVT
**
** Returns void
**
*******************************************************************************/
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
static void btu_hcif_enhanced_flush_complete_evt (void)
{
/* This is empty until an upper layer cares about returning event */
}
#endif
/**********************************************
** End of Simple Pairing Events
***********************************************/
/**********************************************
** BLE Events
***********************************************/
#if (defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)
#if (SMP_INCLUDED == TRUE)
static void btu_hcif_encryption_key_refresh_cmpl_evt (UINT8 *p)
{
UINT8 status;
UINT8 enc_enable = 0;
UINT16 handle;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
if (status == HCI_SUCCESS) {
enc_enable = 1;
}
btm_sec_encrypt_change (handle, status, enc_enable);
}
#endif ///SMP_INCLUDED == TRUE
static void btu_ble_process_adv_pkt (UINT8 *p)
{
HCI_TRACE_DEBUG("btu_ble_process_adv_pkt\n");
btm_ble_process_adv_pkt(p);
}
static void btu_ble_process_adv_dis(UINT8 *p)
{
btm_ble_process_adv_discard_evt(p);
}
static void btu_ble_ll_conn_complete_evt ( UINT8 *p, UINT16 evt_len)
{
btm_ble_conn_complete(p, evt_len, FALSE);
}
//#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
static void btu_ble_proc_enhanced_conn_cmpl( UINT8 *p, UINT16 evt_len)
{
btm_ble_conn_complete(p, evt_len, TRUE);
}
//#endif
static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len)
{
/* LE connection update has completed successfully as a master. */
/* We can enable the update request if the result is a success. */
/* extract the HCI handle first */
UINT8 status;
UINT16 handle, conn_interval, conn_latency, conn_timeout;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT16 (conn_interval, p);
STREAM_TO_UINT16 (conn_latency, p);
STREAM_TO_UINT16 (conn_timeout, p);
l2cble_process_conn_update_evt(handle, status, conn_interval,
conn_latency, conn_timeout);
}
static void btu_ble_ll_get_conn_param_format_err_from_contoller (UINT8 status, UINT16 handle)
{
/* host send illegal connection parameters format, controller would send
back HCI_ERR_ILLEGAL_PARAMETER_FMT */
l2cble_get_conn_param_format_err_from_contoller(status, handle);
}
static void btu_ble_read_remote_feat_evt (UINT8 *p)
{
btm_ble_read_remote_features_complete(p);
}
#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
static void btu_ble_proc_ltk_req (UINT8 *p)
{
UINT16 ediv, handle;
UINT8 *pp;
STREAM_TO_UINT16(handle, p);
pp = p + 8;
STREAM_TO_UINT16(ediv, pp);
btm_ble_ltk_request(handle, p, ediv);
/* This is empty until an upper layer cares about returning event */
}
#endif ///BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
static void btu_ble_data_length_change_evt(UINT8 *p, UINT16 evt_len)
{
UINT16 handle;
UINT16 tx_data_len;
UINT16 rx_data_len;
if (!controller_get_interface()->supports_ble_packet_extension()) {
HCI_TRACE_WARNING("%s, request not supported", __FUNCTION__);
return;
}
STREAM_TO_UINT16(handle, p);
STREAM_TO_UINT16(tx_data_len, p);
p += 2; /* Skip the TxTimer */
STREAM_TO_UINT16(rx_data_len, p);
l2cble_process_data_length_change_event(handle, tx_data_len, rx_data_len);
}
#if (BLE_50_FEATURE_SUPPORT == TRUE)
static void btu_ble_phy_update_complete_evt(UINT8 *p)
{
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
tBTM_BLE_UPDATE_PHY update_phy = {0};
STREAM_TO_UINT8(update_phy.status, p);
STREAM_TO_UINT16(update_phy.conn_idx, p);
STREAM_TO_UINT8(update_phy.tx_phy, p);
STREAM_TO_UINT8(update_phy.rx_phy, p);
btm_ble_update_phy_evt(&update_phy);
}
static void btu_ble_ext_adv_report_evt(UINT8 *p, UINT16 evt_len)
{
tBTM_BLE_EXT_ADV_REPORT ext_adv_report = {0};
UINT8 num_reports = {0};
//UINT8 legacy_event_type = 0;
UINT16 evt_type = 0;
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
STREAM_TO_UINT8(num_reports, p);
if (num_reports == 0) {
HCI_TRACE_ERROR("%s, Invalid number reports is 0", __func__);
}
while (num_reports--) {
STREAM_TO_UINT16(evt_type, p);
ext_adv_report.event_type = evt_type & 0x1F;
if(ext_adv_report.event_type & BTM_BLE_ADV_LEGACY_MASK) {
ext_adv_report.data_status = BTM_BLE_EXT_ADV_DATA_COMPLETE;
} else {
switch(evt_type & BTM_BLE_ADV_DATA_STATUS_MASK) {
case BTM_BLE_ADV_DATA_COMPLETE_MASK:
ext_adv_report.data_status = BTM_BLE_EXT_ADV_DATA_COMPLETE;
break;
case BTM_BLE_ADV_DATA_INCOMPLETE_MASK:
ext_adv_report.data_status = BTM_BLE_EXT_ADV_DATA_INCOMPLETE;
break;
case BTM_BLE_ADV_DATA_TRUNCATED_MASK:
ext_adv_report.data_status = BTM_BLE_EXT_ADV_DATA_TRUNCATED;
break;
}
}
STREAM_TO_UINT8(ext_adv_report.addr_type, p);
STREAM_TO_BDADDR(ext_adv_report.addr, p);
STREAM_TO_UINT8(ext_adv_report.primary_phy, p);
STREAM_TO_UINT8(ext_adv_report.secondry_phy, p);
STREAM_TO_UINT8(ext_adv_report.sid, p);
STREAM_TO_UINT8(ext_adv_report.tx_power, p);
STREAM_TO_UINT8(ext_adv_report.rssi, p);
STREAM_TO_UINT16(ext_adv_report.per_adv_interval, p);
STREAM_TO_UINT8(ext_adv_report.dir_addr_type, p);
STREAM_TO_BDADDR(ext_adv_report.dir_addr, p);
STREAM_TO_UINT8(ext_adv_report.adv_data_len, p);
ext_adv_report.adv_data = p;
btm_ble_ext_adv_report_evt(&ext_adv_report);
p += ext_adv_report.adv_data_len;
}
}
static void btu_ble_periodic_adv_sync_establish_evt(UINT8 *p)
{
tBTM_BLE_PERIOD_ADV_SYNC_ESTAB sync_estab = {0};
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
STREAM_TO_UINT8(sync_estab.status, p);
STREAM_TO_UINT16(sync_estab.sync_handle, p);
STREAM_TO_UINT8(sync_estab.sid, p);
STREAM_TO_UINT8(sync_estab.adv_addr_type, p);
STREAM_TO_BDADDR(sync_estab.adv_addr, p);
STREAM_TO_UINT8(sync_estab.adv_phy, p);
STREAM_TO_UINT16(sync_estab.period_adv_interval, p);
STREAM_TO_UINT8(sync_estab.adv_clk_accuracy, p);
btm_ble_periodic_adv_sync_establish_evt(&sync_estab);
}
static void btu_ble_periodic_adv_report_evt(UINT8 *p, UINT8 evt_len)
{
tBTM_PERIOD_ADV_REPORT adv_report = {0};
/* This parameter is intended to be used in a future feature. */
UINT8 unused = 0;
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
if (evt_len < sizeof(tBTM_PERIOD_ADV_REPORT)) {
HCI_TRACE_ERROR("%s, Invalid params, the adv len is to short.", __func__);
return;
}
STREAM_TO_UINT16(adv_report.sync_handle, p);
STREAM_TO_UINT8(adv_report.tx_power, p);
STREAM_TO_UINT8(adv_report.rssi, p);
STREAM_TO_UINT8(unused, p);
STREAM_TO_UINT8(adv_report.data_status, p);
STREAM_TO_UINT8(adv_report.data_length, p);
if (evt_len <= adv_report.data_length) {
HCI_TRACE_ERROR("%s, Invalid ev_len = %d is less than adv len = %d", __func__, evt_len, adv_report.data_length);
return;
}
adv_report.data = p;
btm_ble_periodic_adv_report_evt(&adv_report);
UNUSED(unused);
}
static void btu_ble_periodic_adv_sync_lost_evt(UINT8 *p)
{
tBTM_BLE_PERIOD_ADV_SYNC_LOST sync_lost = {0};
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
STREAM_TO_UINT16(sync_lost.sync_handle, p);
btm_ble_periodic_adv_sync_lost_evt(&sync_lost);
}
static void btu_ble_scan_timeout_evt(UINT8 *p)
{
UNUSED(p);
btm_ble_scan_timeout_evt();
}
static void btu_ble_adv_set_terminate_evt(UINT8 *p)
{
tBTM_BLE_ADV_TERMINAT adv_term = {0};
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
STREAM_TO_UINT8(adv_term.status, p);
STREAM_TO_UINT8(adv_term.adv_handle, p);
STREAM_TO_UINT16(adv_term.conn_handle, p);
STREAM_TO_UINT8(adv_term.completed_event, p);
btm_ble_adv_set_terminated_evt(&adv_term);
}
static void btu_ble_scan_req_received_evt(UINT8 *p)
{
tBTM_BLE_SCAN_REQ_RECEIVED req_received = {0};
if (!p) {
HCI_TRACE_ERROR("%s, Invalid params.", __func__);
return;
}
STREAM_TO_UINT8(req_received.adv_handle, p);
STREAM_TO_UINT8(req_received.scan_addr_type, p);
STREAM_TO_BDADDR(req_received.scan_addr, p);
btm_ble_scan_req_received_evt(&req_received);
}
#endif // #if (BLE_50_FEATURE_SUPPORT == TRUE)
/**********************************************
** End of BLE Events Handler
***********************************************/
#if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE)
static void btu_ble_rc_param_req_evt(UINT8 *p)
{
UINT16 handle;
UINT16 int_min, int_max, latency, timeout;
STREAM_TO_UINT16(handle, p);
STREAM_TO_UINT16(int_min, p);
STREAM_TO_UINT16(int_max, p);
STREAM_TO_UINT16(latency, p);
STREAM_TO_UINT16(timeout, p);
l2cble_process_rc_param_request_evt(handle, int_min, int_max, latency, timeout);
}
#endif /* BLE_LLT_INCLUDED */
#endif /* BLE_INCLUDED */