2019-01-08 05:29:25 -05:00
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
# include <stdlib.h>
# include <stdio.h>
# include <sys/param.h>
# include <string.h>
# include "spi_flash_chip_driver.h"
# include "memspi_host_driver.h"
# include "esp_log.h"
# include "sdkconfig.h"
2019-09-11 14:41:00 -04:00
# include "esp_flash_internal.h"
2020-09-03 06:17:24 -04:00
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
# include "spi_flash_chip_generic.h" //for spi_flash_chip_generic_yield()
2019-01-08 05:29:25 -05:00
static const char TAG [ ] = " spi_flash " ;
2020-06-04 05:21:34 -04:00
# ifdef CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
# define MAX_WRITE_CHUNK CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE /* write in chunks */
# else
2019-01-08 05:29:25 -05:00
# define MAX_WRITE_CHUNK 8192 /* write in chunks */
2020-06-04 05:21:34 -04:00
# endif // CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
2019-01-08 05:29:25 -05:00
# define MAX_READ_CHUNK 16384
# ifdef CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS
# define UNSAFE_WRITE_ADDRESS abort()
# else
# define UNSAFE_WRITE_ADDRESS return ESP_ERR_INVALID_ARG
# endif
/* CHECK_WRITE_ADDRESS macro to fail writes which land in the
bootloader , partition table , or running application region .
*/
# if CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
# define CHECK_WRITE_ADDRESS(CHIP, ADDR, SIZE)
# else /* FAILS or ABORTS */
# define CHECK_WRITE_ADDRESS(CHIP, ADDR, SIZE) do { \
2019-09-11 14:41:00 -04:00
if ( CHIP & & CHIP - > os_func - > region_protected & & CHIP - > os_func - > region_protected ( CHIP - > os_func_data , ADDR , SIZE ) ) { \
2019-01-08 05:29:25 -05:00
UNSAFE_WRITE_ADDRESS ; \
} \
} while ( 0 )
# endif // CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
# define IO_STR_LEN 7
static const char io_mode_str [ ] [ IO_STR_LEN ] = {
" slowrd " ,
" fastrd " ,
" dout " ,
" dio " ,
" qout " ,
" qio " ,
} ;
2019-09-05 01:11:36 -04:00
_Static_assert ( sizeof ( io_mode_str ) / IO_STR_LEN = = SPI_FLASH_READ_MODE_MAX , " the io_mode_str should be consistent with the esp_flash_io_mode_t defined in spi_flash_ll.h " ) ;
2019-01-08 05:29:25 -05:00
2019-09-09 12:56:46 -04:00
esp_err_t esp_flash_read_chip_id ( esp_flash_t * chip , uint32_t * flash_id ) ;
2019-01-08 05:29:25 -05:00
2020-04-29 22:37:35 -04:00
static esp_err_t spiflash_start_default ( esp_flash_t * chip ) ;
static esp_err_t spiflash_end_default ( esp_flash_t * chip , esp_err_t err ) ;
static esp_err_t check_chip_pointer_default ( esp_flash_t * * inout_chip ) ;
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
static esp_err_t flash_end_flush_cache ( esp_flash_t * chip , esp_err_t err , bool bus_acquired , uint32_t address , uint32_t length ) ;
2020-04-29 22:37:35 -04:00
typedef struct {
esp_err_t ( * start ) ( esp_flash_t * chip ) ;
esp_err_t ( * end ) ( esp_flash_t * chip , esp_err_t err ) ;
esp_err_t ( * chip_check ) ( esp_flash_t * * inout_chip ) ;
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
esp_err_t ( * flash_end_flush_cache ) ( esp_flash_t * chip , esp_err_t err , bool bus_acquired , uint32_t address , uint32_t length ) ;
2020-04-29 22:37:35 -04:00
} rom_spiflash_api_func_t ;
// These functions can be placed in the ROM. For now we use the code in IDF.
DRAM_ATTR static rom_spiflash_api_func_t default_spiflash_rom_api = {
. start = spiflash_start_default ,
. end = spiflash_end_default ,
. chip_check = check_chip_pointer_default ,
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
. flash_end_flush_cache = flash_end_flush_cache ,
2020-04-29 22:37:35 -04:00
} ;
DRAM_ATTR rom_spiflash_api_func_t * rom_spiflash_api_funcs = & default_spiflash_rom_api ;
2019-01-08 05:29:25 -05:00
/* Static function to notify OS of a new SPI flash operation.
If returns an error result , caller must abort . If returns ESP_OK , caller must
2020-04-29 22:37:35 -04:00
call rom_spiflash_api_funcs - > end ( ) before returning .
2019-01-08 05:29:25 -05:00
*/
2020-04-29 22:37:35 -04:00
static esp_err_t IRAM_ATTR spiflash_start_default ( esp_flash_t * chip )
2019-01-08 05:29:25 -05:00
{
if ( chip - > os_func ! = NULL & & chip - > os_func - > start ! = NULL ) {
esp_err_t err = chip - > os_func - > start ( chip - > os_func_data ) ;
if ( err ! = ESP_OK ) {
return err ;
}
}
2020-05-07 02:46:41 -04:00
chip - > host - > driver - > dev_config ( chip - > host ) ;
2019-01-08 05:29:25 -05:00
return ESP_OK ;
}
/* Static function to notify OS that SPI flash operation is complete.
*/
2020-04-29 22:37:35 -04:00
static esp_err_t IRAM_ATTR spiflash_end_default ( esp_flash_t * chip , esp_err_t err )
2019-01-08 05:29:25 -05:00
{
if ( chip - > os_func ! = NULL
& & chip - > os_func - > end ! = NULL ) {
esp_err_t end_err = chip - > os_func - > end ( chip - > os_func_data ) ;
if ( err = = ESP_OK ) {
err = end_err ; // Only return the 'end' error if we haven't already failed
}
}
return err ;
}
2020-04-29 22:37:35 -04:00
// check that the 'chip' parameter is properly initialised
static esp_err_t check_chip_pointer_default ( esp_flash_t * * inout_chip )
{
esp_flash_t * chip = * inout_chip ;
if ( chip = = NULL ) {
chip = esp_flash_default_chip ;
}
* inout_chip = chip ;
if ( chip = = NULL | | ! esp_flash_chip_driver_initialized ( chip ) ) {
return ESP_ERR_FLASH_NOT_INITIALISED ;
}
return ESP_OK ;
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
static IRAM_ATTR esp_err_t flash_end_flush_cache ( esp_flash_t * chip , esp_err_t err , bool bus_acquired , uint32_t address , uint32_t length )
{
if ( ! bus_acquired ) {
// Try to acquire the bus again to flush the cache before exit.
esp_err_t acquire_err = rom_spiflash_api_funcs - > start ( chip ) ;
if ( acquire_err ! = ESP_OK ) {
return ( err = = ESP_OK ) ? acquire_err : err ;
}
}
if ( chip - > host - > driver - > flush_cache ) {
esp_err_t flush_err = chip - > host - > driver - > flush_cache ( chip - > host , address , length ) ;
if ( err = = ESP_OK ) {
err = flush_err ;
}
}
return rom_spiflash_api_funcs - > end ( chip , err ) ;
}
2019-01-08 05:29:25 -05:00
/* Return true if regions 'a' and 'b' overlap at all, based on their start offsets and lengths. */
inline static bool regions_overlap ( uint32_t a_start , uint32_t a_len , uint32_t b_start , uint32_t b_len ) ;
/* Top-level API functions, calling into chip_drv functions via chip->drv */
static esp_err_t detect_spi_flash_chip ( esp_flash_t * chip ) ;
bool esp_flash_chip_driver_initialized ( const esp_flash_t * chip )
{
if ( ! chip - > chip_drv ) return false ;
return true ;
}
esp_err_t IRAM_ATTR esp_flash_init ( esp_flash_t * chip )
{
2020-07-26 15:13:07 -04:00
// Chip init flow
// 1. Read chip id
// 2. (optional) Detect chip vendor
// 3. Get basic parameters of the chip (size, dummy count, etc.)
// 4. Init chip into desired mode (without breaking the cache!)
2019-01-08 05:29:25 -05:00
esp_err_t err = ESP_OK ;
2020-05-07 02:46:41 -04:00
if ( chip = = NULL | | chip - > host = = NULL | | chip - > host - > driver = = NULL | |
( ( memspi_host_inst_t * ) chip - > host ) - > spi = = NULL ) {
2019-01-08 05:29:25 -05:00
return ESP_ERR_INVALID_ARG ;
}
2019-09-09 12:56:46 -04:00
//read chip id
uint32_t flash_id ;
int retries = 10 ;
do {
err = esp_flash_read_chip_id ( chip , & flash_id ) ;
} while ( err = = ESP_ERR_FLASH_NOT_INITIALISED & & retries - - > 0 ) ;
if ( err ! = ESP_OK ) {
return err ;
}
chip - > chip_id = flash_id ;
2019-01-08 05:29:25 -05:00
if ( ! esp_flash_chip_driver_initialized ( chip ) ) {
// Detect chip_drv
err = detect_spi_flash_chip ( chip ) ;
if ( err ! = ESP_OK ) {
return err ;
}
}
// Detect flash size
uint32_t size ;
err = esp_flash_get_size ( chip , & size ) ;
if ( err ! = ESP_OK ) {
ESP_LOGE ( TAG , " failed to get chip size " ) ;
return err ;
}
ESP_LOGI ( TAG , " flash io: %s " , io_mode_str [ chip - > read_mode ] ) ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
if ( err = = ESP_OK ) {
// Try to set the flash mode to whatever default mode was chosen
2019-09-05 01:11:36 -04:00
err = chip - > chip_drv - > set_io_mode ( chip ) ;
if ( err = = ESP_ERR_FLASH_NO_RESPONSE & & ! esp_flash_is_quad_mode ( chip ) ) {
//some chips (e.g. Winbond) don't support to clear QE, treat as success
err = ESP_OK ;
}
2019-01-08 05:29:25 -05:00
}
// Done: all fields on 'chip' are initialised
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
2020-07-26 15:13:07 -04:00
static esp_err_t IRAM_ATTR read_id_core ( esp_flash_t * chip , uint32_t * out_id , bool sanity_check )
2019-09-05 01:11:36 -04:00
{
2020-07-26 15:13:07 -04:00
bool installed = esp_flash_chip_driver_initialized ( chip ) ;
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-09-05 01:11:36 -04:00
if ( err ! = ESP_OK ) {
return err ;
}
2020-07-26 15:13:07 -04:00
esp_err_t ( * read_id_func ) ( void * , uint32_t * ) ;
void * read_id_arg ;
if ( installed & & chip - > chip_drv - > read_id ) {
read_id_func = ( void * ) chip - > chip_drv - > read_id ;
read_id_arg = ( void * ) chip ;
} else {
//default option if the chip is not detected/chosen yet.
read_id_func = ( void * ) chip - > host - > driver - > read_id ;
read_id_arg = ( void * ) chip - > host ;
}
// Inner function fails if it sees all-ones or all-zeroes.
err = read_id_func ( read_id_arg , out_id ) ;
2019-09-05 01:11:36 -04:00
2020-07-26 15:13:07 -04:00
if ( sanity_check & & err = = ESP_OK ) {
// Send RDID command twice, check for a matching result and retry in case we just powered on
2019-09-05 01:11:36 -04:00
uint32_t new_id ;
2020-07-26 15:13:07 -04:00
err = read_id_func ( read_id_arg , & new_id ) ;
if ( err = = ESP_OK & & ( new_id ! = * out_id ) ) {
2019-09-05 01:11:36 -04:00
err = ESP_ERR_FLASH_NOT_INITIALISED ;
}
}
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-09-05 01:11:36 -04:00
}
2020-07-26 15:13:07 -04:00
// Faster version with sanity check.
// Called in esp_flash_init and unit test (though not public)
esp_err_t esp_flash_read_chip_id ( esp_flash_t * chip , uint32_t * out_id )
{
return read_id_core ( chip , out_id , true ) ;
}
esp_err_t esp_flash_read_id ( esp_flash_t * chip , uint32_t * out_id )
{
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
//Accept uninitialized chip when reading chip id
if ( err ! = ESP_OK & & ! ( err = = ESP_ERR_FLASH_NOT_INITIALISED & & chip ! = NULL ) ) return err ;
if ( out_id = = NULL ) return ESP_ERR_INVALID_ARG ;
return read_id_core ( chip , out_id , false ) ;
}
2019-01-08 05:29:25 -05:00
static esp_err_t IRAM_ATTR detect_spi_flash_chip ( esp_flash_t * chip )
{
esp_err_t err ;
2019-09-09 12:56:46 -04:00
uint32_t flash_id = chip - > chip_id ;
2019-01-08 05:29:25 -05:00
// Detect the chip and set the chip_drv structure for it
const spi_flash_chip_t * * drivers = esp_flash_registered_chips ;
while ( * drivers ! = NULL & & ! esp_flash_chip_driver_initialized ( chip ) ) {
chip - > chip_drv = * drivers ;
// start/end SPI operation each time, for multitasking
// and also so esp_flash_registered_flash_drivers can live in flash
ESP_LOGD ( TAG , " trying chip: %s " , chip - > chip_drv - > name ) ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
if ( chip - > chip_drv - > probe ( chip , flash_id ) ! = ESP_OK ) {
chip - > chip_drv = NULL ;
}
// if probe succeeded, chip->drv stays set
drivers + + ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
}
if ( ! esp_flash_chip_driver_initialized ( chip ) ) {
return ESP_ERR_NOT_FOUND ;
}
ESP_LOGI ( TAG , " detected chip: %s " , chip - > chip_drv - > name ) ;
return ESP_OK ;
}
2020-04-29 22:37:35 -04:00
/* Convenience macro for beginning of all API functions.
* Check the return value of ` rom_spiflash_api_funcs - > chip_check ` is correct ,
* and the chip supports the operation in question .
*/
# define VERIFY_CHIP_OP(OP) do { \
if ( err ! = ESP_OK ) return err ; \
2019-01-08 05:29:25 -05:00
if ( chip - > chip_drv - > OP = = NULL ) { \
return ESP_ERR_FLASH_UNSUPPORTED_CHIP ; \
} \
} while ( 0 )
2019-06-19 08:35:55 -04:00
esp_err_t IRAM_ATTR esp_flash_get_size ( esp_flash_t * chip , uint32_t * out_size )
2019-01-08 05:29:25 -05:00
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( detect_size ) ;
2019-06-19 08:35:55 -04:00
if ( out_size = = NULL ) {
2019-01-08 05:29:25 -05:00
return ESP_ERR_INVALID_ARG ;
}
if ( chip - > size ! = 0 ) {
2019-06-19 08:35:55 -04:00
* out_size = chip - > size ;
2019-01-08 05:29:25 -05:00
return ESP_OK ;
}
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
uint32_t detect_size ;
err = chip - > chip_drv - > detect_size ( chip , & detect_size ) ;
if ( err = = ESP_OK ) {
chip - > size = detect_size ;
}
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
esp_err_t IRAM_ATTR esp_flash_erase_chip ( esp_flash_t * chip )
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( erase_chip ) ;
2019-01-08 05:29:25 -05:00
CHECK_WRITE_ADDRESS ( chip , 0 , chip - > size ) ;
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
//check before the operation, in case this is called too close to the last operation
err = spi_flash_chip_generic_yield ( chip , false ) ;
if ( err ! = ESP_OK ) {
return err ;
}
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
2019-08-02 01:04:48 -04:00
err = chip - > chip_drv - > erase_chip ( chip ) ;
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( chip - > host - > driver - > flush_cache ) {
esp_err_t flush_cache_err = chip - > host - > driver - > flush_cache ( chip - > host , 0 , chip - > size ) ;
if ( err = = ESP_OK ) {
err = flush_cache_err ;
}
}
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
esp_err_t IRAM_ATTR esp_flash_erase_region ( esp_flash_t * chip , uint32_t start , uint32_t len )
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( erase_sector ) ;
VERIFY_CHIP_OP ( erase_block ) ;
2019-01-08 05:29:25 -05:00
CHECK_WRITE_ADDRESS ( chip , start , len ) ;
2020-04-29 22:37:35 -04:00
2019-01-08 05:29:25 -05:00
uint32_t block_erase_size = chip - > chip_drv - > erase_block = = NULL ? 0 : chip - > chip_drv - > block_erase_size ;
uint32_t sector_size = chip - > chip_drv - > sector_size ;
if ( sector_size = = 0 | | ( block_erase_size % sector_size ) ! = 0 ) {
return ESP_ERR_FLASH_NOT_INITIALISED ;
}
if ( start > chip - > size | | start + len > chip - > size ) {
return ESP_ERR_INVALID_ARG ;
}
if ( ( start % chip - > chip_drv - > sector_size ) ! = 0 | | ( len % chip - > chip_drv - > sector_size ) ! = 0 ) {
// Can only erase multiples of the sector size, starting at sector boundary
return ESP_ERR_INVALID_ARG ;
}
2020-04-29 22:37:35 -04:00
err = ESP_OK ;
2019-01-08 05:29:25 -05:00
// Check for write protected regions overlapping the erase region
2019-08-02 01:04:48 -04:00
if ( chip - > chip_drv - > get_protected_regions ! = NULL & &
chip - > chip_drv - > num_protectable_regions > 0 ) {
2019-09-10 02:34:06 -04:00
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-09-10 02:34:06 -04:00
if ( err ! = ESP_OK ) {
return err ;
}
2019-01-08 05:29:25 -05:00
uint64_t protected = 0 ;
err = chip - > chip_drv - > get_protected_regions ( chip , & protected ) ;
if ( err = = ESP_OK & & protected ! = 0 ) {
for ( int i = 0 ; i < chip - > chip_drv - > num_protectable_regions & & err = = ESP_OK ; i + + ) {
const esp_flash_region_t * region = & chip - > chip_drv - > protectable_regions [ i ] ;
if ( ( protected & BIT64 ( i ) )
& & regions_overlap ( start , len , region - > offset , region - > size ) ) {
err = ESP_ERR_FLASH_PROTECTED ;
}
}
}
2019-09-10 02:34:06 -04:00
// Don't lock the SPI flash for the entire erase, as this may be very long
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( err ! = ESP_OK ) {
return err ;
}
uint32_t erase_addr = start ;
uint32_t len_remain = len ;
// Indicate whether the bus is acquired by the driver, needs to be released before return
bool bus_acquired = false ;
while ( 1 ) {
//check before the operation, in case this is called too close to the last operation
err = spi_flash_chip_generic_yield ( chip , false ) ;
if ( err ! = ESP_OK ) {
break ;
}
2019-01-08 05:29:25 -05:00
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
break ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
bus_acquired = true ;
2019-01-08 05:29:25 -05:00
2020-04-23 14:13:17 -04:00
# ifndef CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE
2019-01-08 05:29:25 -05:00
// If possible erase an entire multi-sector block
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( block_erase_size > 0 & & len_remain > = block_erase_size & & ( erase_addr % block_erase_size ) = = 0 ) {
err = chip - > chip_drv - > erase_block ( chip , erase_addr ) ;
erase_addr + = block_erase_size ;
len_remain - = block_erase_size ;
2020-04-23 14:13:17 -04:00
} else
# endif
{
2019-01-08 05:29:25 -05:00
// Otherwise erase individual sector only
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
err = chip - > chip_drv - > erase_sector ( chip , erase_addr ) ;
erase_addr + = sector_size ;
len_remain - = sector_size ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( err ! = ESP_OK | | len_remain = = 0 ) {
// On ESP32, the cache re-enable is in the end() function, while flush_cache should
// happen when the cache is still disabled on ESP32. Break before the end() function and
// do end() later
assert ( bus_acquired ) ;
break ;
}
2020-04-02 05:29:21 -04:00
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
err = rom_spiflash_api_funcs - > end ( chip , ESP_OK ) ;
if ( err ! = ESP_OK ) {
break ;
2020-04-02 05:29:21 -04:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
bus_acquired = false ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
return rom_spiflash_api_funcs - > flash_end_flush_cache ( chip , err , bus_acquired , start , len ) ;
2019-01-08 05:29:25 -05:00
}
2019-08-02 01:04:48 -04:00
esp_err_t IRAM_ATTR esp_flash_get_chip_write_protect ( esp_flash_t * chip , bool * out_write_protected )
2019-01-08 05:29:25 -05:00
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( get_chip_write_protect ) ;
2019-08-02 01:04:48 -04:00
if ( out_write_protected = = NULL ) {
2019-01-08 05:29:25 -05:00
return ESP_ERR_INVALID_ARG ;
}
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
2019-08-02 01:04:48 -04:00
err = chip - > chip_drv - > get_chip_write_protect ( chip , out_write_protected ) ;
2019-01-08 05:29:25 -05:00
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
2019-06-19 08:35:55 -04:00
esp_err_t IRAM_ATTR esp_flash_set_chip_write_protect ( esp_flash_t * chip , bool write_protect )
2019-01-08 05:29:25 -05:00
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( set_chip_write_protect ) ;
2019-01-08 05:29:25 -05:00
//TODO: skip writing if already locked or unlocked
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
2019-06-19 08:35:55 -04:00
err = chip - > chip_drv - > set_chip_write_protect ( chip , write_protect ) ;
2019-01-08 05:29:25 -05:00
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
2019-06-19 08:35:55 -04:00
esp_err_t esp_flash_get_protectable_regions ( const esp_flash_t * chip , const esp_flash_region_t * * out_regions , uint32_t * out_num_regions )
2019-01-08 05:29:25 -05:00
{
2019-06-19 08:35:55 -04:00
if ( out_num_regions ! = NULL ) {
* out_num_regions = 0 ; // In case caller doesn't check result
2019-01-08 05:29:25 -05:00
}
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( ( esp_flash_t * * ) & chip ) ;
VERIFY_CHIP_OP ( get_protected_regions ) ;
2019-01-08 05:29:25 -05:00
2019-06-19 08:35:55 -04:00
if ( out_regions = = NULL | | out_num_regions = = NULL ) {
2019-01-08 05:29:25 -05:00
return ESP_ERR_INVALID_ARG ;
}
2019-06-19 08:35:55 -04:00
* out_num_regions = chip - > chip_drv - > num_protectable_regions ;
* out_regions = chip - > chip_drv - > protectable_regions ;
2019-01-08 05:29:25 -05:00
return ESP_OK ;
}
static esp_err_t find_region ( const esp_flash_t * chip , const esp_flash_region_t * region , uint8_t * index )
{
if ( region = = NULL ) {
return ESP_ERR_INVALID_ARG ;
}
for ( * index = 0 ; * index < chip - > chip_drv - > num_protectable_regions ; ( * index ) + + ) {
if ( memcmp ( & chip - > chip_drv - > protectable_regions [ * index ] ,
region , sizeof ( esp_flash_region_t ) ) = = 0 ) {
return ESP_OK ;
}
}
return ESP_ERR_NOT_FOUND ;
}
2019-06-19 04:37:11 -04:00
esp_err_t IRAM_ATTR esp_flash_get_protected_region ( esp_flash_t * chip , const esp_flash_region_t * region , bool * out_protected )
2019-01-08 05:29:25 -05:00
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( get_protected_regions ) ;
2019-01-08 05:29:25 -05:00
2019-06-19 04:37:11 -04:00
if ( out_protected = = NULL ) {
2019-01-08 05:29:25 -05:00
return ESP_ERR_INVALID_ARG ;
}
uint8_t index ;
2020-04-29 22:37:35 -04:00
err = find_region ( chip , region , & index ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
uint64_t protection_mask = 0 ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
err = chip - > chip_drv - > get_protected_regions ( chip , & protection_mask ) ;
if ( err = = ESP_OK ) {
2019-06-19 04:37:11 -04:00
* out_protected = protection_mask & ( 1LL < < index ) ;
2019-01-08 05:29:25 -05:00
}
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
2019-06-19 04:37:11 -04:00
esp_err_t IRAM_ATTR esp_flash_set_protected_region ( esp_flash_t * chip , const esp_flash_region_t * region , bool protect )
2019-01-08 05:29:25 -05:00
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( set_protected_regions ) ;
2019-01-08 05:29:25 -05:00
uint8_t index ;
2020-04-29 22:37:35 -04:00
err = find_region ( chip , region , & index ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
uint64_t protection_mask = 0 ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
return err ;
}
err = chip - > chip_drv - > get_protected_regions ( chip , & protection_mask ) ;
if ( err = = ESP_OK ) {
2019-06-19 04:37:11 -04:00
if ( protect ) {
2019-01-08 05:29:25 -05:00
protection_mask | = ( 1LL < < index ) ;
} else {
protection_mask & = ~ ( 1LL < < index ) ;
}
err = chip - > chip_drv - > set_protected_regions ( chip , protection_mask ) ;
}
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
}
esp_err_t IRAM_ATTR esp_flash_read ( esp_flash_t * chip , void * buffer , uint32_t address , uint32_t length )
{
if ( length = = 0 ) {
return ESP_OK ;
}
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( read ) ;
2019-01-08 05:29:25 -05:00
if ( buffer = = NULL | | address > chip - > size | | address + length > chip - > size ) {
return ESP_ERR_INVALID_ARG ;
}
//when the cache is disabled, only the DRAM can be read, check whether we need to receive in another buffer in DRAM.
2020-05-07 02:46:41 -04:00
bool direct_read = chip - > host - > driver - > supports_direct_read ( chip - > host , buffer ) ;
2019-01-08 05:29:25 -05:00
uint8_t * temp_buffer = NULL ;
2020-02-26 19:57:00 -05:00
//each time, we at most read this length
//after that, we release the lock to allow some other operations
size_t read_chunk_size = MIN ( MAX_READ_CHUNK , length ) ;
2019-01-08 05:29:25 -05:00
if ( ! direct_read ) {
2020-04-29 22:37:35 -04:00
size_t actual_len = 0 ;
2020-07-29 05:39:56 -04:00
if ( chip - > os_func - > get_temp_buffer ! = NULL ) {
temp_buffer = chip - > os_func - > get_temp_buffer ( chip - > os_func_data , read_chunk_size , & actual_len ) ;
read_chunk_size = actual_len ;
}
2020-02-24 22:56:13 -05:00
if ( temp_buffer = = NULL ) {
return ESP_ERR_NO_MEM ;
}
2019-01-08 05:29:25 -05:00
}
2020-04-29 22:37:35 -04:00
err = ESP_OK ;
2019-01-08 05:29:25 -05:00
do {
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
break ;
}
//if required (dma buffer allocated), read to the buffer instead of the original buffer
uint8_t * buffer_to_read = ( temp_buffer ) ? temp_buffer : buffer ;
2020-02-26 19:57:00 -05:00
// Length we will read this iteration is either the chunk size or the remaining length, whichever is smaller
size_t length_to_read = MIN ( read_chunk_size , length ) ;
2019-01-08 05:29:25 -05:00
if ( err = = ESP_OK ) {
err = chip - > chip_drv - > read ( chip , buffer_to_read , address , length_to_read ) ;
}
if ( err ! = ESP_OK ) {
2020-04-29 22:37:35 -04:00
rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
break ;
}
//even if this is failed, the data is still valid, copy before quit
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-01-08 05:29:25 -05:00
//copy back to the original buffer
if ( temp_buffer ) {
memcpy ( buffer , temp_buffer , length_to_read ) ;
}
address + = length_to_read ;
length - = length_to_read ;
2020-04-29 22:37:35 -04:00
buffer = ( void * ) ( ( intptr_t ) buffer + length_to_read ) ;
2019-01-08 05:29:25 -05:00
} while ( err = = ESP_OK & & length > 0 ) ;
2020-07-29 05:39:56 -04:00
if ( chip - > os_func - > release_temp_buffer ! = NULL ) {
chip - > os_func - > release_temp_buffer ( chip - > os_func_data , temp_buffer ) ;
}
2019-01-08 05:29:25 -05:00
return err ;
}
esp_err_t IRAM_ATTR esp_flash_write ( esp_flash_t * chip , const void * buffer , uint32_t address , uint32_t length )
{
if ( length = = 0 ) {
return ESP_OK ;
}
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( write ) ;
2019-01-08 05:29:25 -05:00
CHECK_WRITE_ADDRESS ( chip , address , length ) ;
if ( buffer = = NULL | | address > chip - > size | | address + length > chip - > size ) {
return ESP_ERR_INVALID_ARG ;
}
//when the cache is disabled, only the DRAM can be read, check whether we need to copy the data first
2020-05-07 02:46:41 -04:00
bool direct_write = chip - > host - > driver - > supports_direct_write ( chip - > host , buffer ) ;
2019-01-08 05:29:25 -05:00
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
// Indicate whether the bus is acquired by the driver, needs to be released before return
bool bus_acquired = false ;
2020-04-29 22:37:35 -04:00
err = ESP_OK ;
2019-01-08 05:29:25 -05:00
/* Write output in chunks, either by buffering on stack or
by artificially cutting into MAX_WRITE_CHUNK parts ( in an OS
environment , this prevents writing from causing interrupt or higher priority task
starvation . ) */
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
uint32_t write_addr = address ;
uint32_t len_remain = length ;
while ( 1 ) {
2019-01-08 05:29:25 -05:00
uint32_t write_len ;
const void * write_buf ;
2020-08-05 01:37:42 -04:00
uint32_t temp_buf [ 8 ] ;
2019-01-08 05:29:25 -05:00
if ( direct_write ) {
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
write_len = MIN ( len_remain , MAX_WRITE_CHUNK ) ;
2019-01-08 05:29:25 -05:00
write_buf = buffer ;
} else {
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
write_len = MIN ( len_remain , sizeof ( temp_buf ) ) ;
2020-08-05 01:37:42 -04:00
memcpy ( temp_buf , buffer , write_len ) ;
write_buf = temp_buf ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
//check before the operation, in case this is called too close to the last operation
err = spi_flash_chip_generic_yield ( chip , false ) ;
if ( err ! = ESP_OK ) {
break ;
}
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-01-08 05:29:25 -05:00
if ( err ! = ESP_OK ) {
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
break ;
2019-01-08 05:29:25 -05:00
}
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
bus_acquired = true ;
2019-01-08 05:29:25 -05:00
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
err = chip - > chip_drv - > write ( chip , write_buf , write_addr , write_len ) ;
len_remain - = write_len ;
2019-01-08 05:29:25 -05:00
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( err ! = ESP_OK | | len_remain = = 0 ) {
// On ESP32, the cache re-enable is in the end() function, while flush_cache should
// happen when the cache is still disabled on ESP32. Break before the end() function and
// do end() later
assert ( bus_acquired ) ;
break ;
}
2019-01-08 05:29:25 -05:00
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > end ( chip , err ) ;
esp_flash: refactor to support various type of yield
There is a periodically yield in the esp_flash driver, to ensure the
cache will not be disabled for too long on ESP32.
On ESP32-S2 and later, we need to support more different kind of yield:
1. polling conditions, including timeout, SW read request, etc.
2. wait for events, including HW done/error/auto-suspend, timeout
semaphore, etc.
The check_yield() and yield() is separated into two parts, because we
may need to insert suspend, etc. between them.
2020-09-11 06:20:08 -04:00
if ( err ! = ESP_OK ) {
break ;
}
bus_acquired = false ;
write_addr + = write_len ;
buffer = ( void * ) ( ( intptr_t ) buffer + write_len ) ;
}
return rom_spiflash_api_funcs - > flash_end_flush_cache ( chip , err , bus_acquired , address , length ) ;
2019-01-08 05:29:25 -05:00
}
2019-09-05 06:45:45 -04:00
//currently the legacy implementation is used, from flash_ops.c
esp_err_t spi_flash_write_encrypted ( size_t dest_addr , const void * src , size_t size ) ;
2019-01-08 05:29:25 -05:00
esp_err_t IRAM_ATTR esp_flash_write_encrypted ( esp_flash_t * chip , uint32_t address , const void * buffer , uint32_t length )
{
2019-09-05 06:45:45 -04:00
/*
* Since currently this feature is supported only by the hardware , there
* is no way to support non - standard chips . We use the legacy
* implementation and skip the chip and driver layers .
*/
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
if ( err ! = ESP_OK ) return err ;
2019-01-08 05:29:25 -05:00
if ( buffer = = NULL | | address > chip - > size | | address + length > chip - > size ) {
return ESP_ERR_INVALID_ARG ;
}
2019-09-05 06:45:45 -04:00
return spi_flash_write_encrypted ( address , buffer , length ) ;
2019-01-08 05:29:25 -05:00
}
inline static IRAM_ATTR bool regions_overlap ( uint32_t a_start , uint32_t a_len , uint32_t b_start , uint32_t b_len )
{
uint32_t a_end = a_start + a_len ;
uint32_t b_end = b_start + b_len ;
return ( a_end > b_start & & b_end > a_start ) ;
}
2019-09-05 06:45:45 -04:00
//currently the legacy implementation is used, from flash_ops.c
esp_err_t spi_flash_read_encrypted ( size_t src , void * dstv , size_t size ) ;
esp_err_t IRAM_ATTR esp_flash_read_encrypted ( esp_flash_t * chip , uint32_t address , void * out_buffer , uint32_t length )
{
/*
* Since currently this feature is supported only by the hardware , there
* is no way to support non - standard chips . We use the legacy
* implementation and skip the chip and driver layers .
*/
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
if ( err ! = ESP_OK ) return err ;
2019-09-05 06:45:45 -04:00
return spi_flash_read_encrypted ( address , out_buffer , length ) ;
}
2019-01-08 05:29:25 -05:00
2019-09-05 01:11:36 -04:00
// test only, non-public
IRAM_ATTR esp_err_t esp_flash_get_io_mode ( esp_flash_t * chip , bool * qe )
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( get_io_mode ) ;
2019-09-05 01:11:36 -04:00
esp_flash_io_mode_t io_mode ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-09-05 01:11:36 -04:00
if ( err ! = ESP_OK ) {
return err ;
}
err = chip - > chip_drv - > get_io_mode ( chip , & io_mode ) ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-09-05 01:11:36 -04:00
if ( err = = ESP_OK ) {
* qe = ( io_mode = = SPI_FLASH_QOUT ) ;
}
return err ;
}
IRAM_ATTR esp_err_t esp_flash_set_io_mode ( esp_flash_t * chip , bool qe )
{
2020-04-29 22:37:35 -04:00
esp_err_t err = rom_spiflash_api_funcs - > chip_check ( & chip ) ;
VERIFY_CHIP_OP ( set_io_mode ) ;
2019-09-05 01:11:36 -04:00
chip - > read_mode = ( qe ? SPI_FLASH_QOUT : SPI_FLASH_SLOWRD ) ;
2020-04-29 22:37:35 -04:00
err = rom_spiflash_api_funcs - > start ( chip ) ;
2019-09-05 01:11:36 -04:00
if ( err ! = ESP_OK ) {
return err ;
}
err = chip - > chip_drv - > set_io_mode ( chip ) ;
2020-04-29 22:37:35 -04:00
return rom_spiflash_api_funcs - > end ( chip , err ) ;
2019-09-05 01:11:36 -04:00
}
2019-09-11 14:41:00 -04:00
# ifndef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
esp_err_t esp_flash_app_disable_protect ( bool disable )
{
if ( disable ) {
return esp_flash_app_disable_os_functions ( esp_flash_default_chip ) ;
} else {
2020-04-09 01:30:12 -04:00
return esp_flash_app_enable_os_functions ( esp_flash_default_chip ) ;
2019-09-11 14:41:00 -04:00
}
}
# endif
2019-01-08 05:29:25 -05:00
/*------------------------------------------------------------------------------
Adapter layer to original api before IDF v4 .0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2019-06-18 13:31:43 -04:00
# ifndef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
2020-02-24 22:56:13 -05:00
/* Translate any ESP_ERR_FLASH_xxx error code (new API) to a generic ESP_ERR_xyz error code
*/
2019-09-18 03:07:47 -04:00
static IRAM_ATTR esp_err_t spi_flash_translate_rc ( esp_err_t err )
2019-01-08 05:29:25 -05:00
{
switch ( err ) {
case ESP_OK :
case ESP_ERR_INVALID_ARG :
2020-02-24 22:56:13 -05:00
case ESP_ERR_NO_MEM :
return err ;
2019-01-08 05:29:25 -05:00
case ESP_ERR_FLASH_NOT_INITIALISED :
case ESP_ERR_FLASH_PROTECTED :
return ESP_ERR_INVALID_STATE ;
2020-02-24 22:56:13 -05:00
2019-01-08 05:29:25 -05:00
case ESP_ERR_NOT_FOUND :
case ESP_ERR_FLASH_UNSUPPORTED_HOST :
case ESP_ERR_FLASH_UNSUPPORTED_CHIP :
return ESP_ERR_NOT_SUPPORTED ;
2020-02-24 22:56:13 -05:00
2019-01-08 05:29:25 -05:00
case ESP_ERR_FLASH_NO_RESPONSE :
return ESP_ERR_INVALID_RESPONSE ;
2020-02-24 22:56:13 -05:00
2019-01-08 05:29:25 -05:00
default :
2020-02-24 22:56:13 -05:00
ESP_EARLY_LOGE ( TAG , " unexpected spi flash error code: 0x%x " , err ) ;
2019-01-08 05:29:25 -05:00
abort ( ) ;
}
}
2019-09-18 03:07:47 -04:00
esp_err_t IRAM_ATTR spi_flash_erase_range ( uint32_t start_addr , uint32_t size )
2019-01-08 05:29:25 -05:00
{
esp_err_t err = esp_flash_erase_region ( NULL , start_addr , size ) ;
return spi_flash_translate_rc ( err ) ;
}
2019-09-18 03:07:47 -04:00
esp_err_t IRAM_ATTR spi_flash_write ( size_t dst , const void * srcv , size_t size )
2019-01-08 05:29:25 -05:00
{
esp_err_t err = esp_flash_write ( NULL , srcv , dst , size ) ;
return spi_flash_translate_rc ( err ) ;
}
2019-09-18 03:07:47 -04:00
esp_err_t IRAM_ATTR spi_flash_read ( size_t src , void * dstv , size_t size )
2019-01-08 05:29:25 -05:00
{
esp_err_t err = esp_flash_read ( NULL , dstv , src , size ) ;
return spi_flash_translate_rc ( err ) ;
}
2019-06-18 13:31:43 -04:00
# endif // CONFIG_SPI_FLASH_USE_LEGACY_IMPL