esp-idf/examples/protocols/asio/tcp_echo_server/README.md

20 lines
1.0 KiB
Markdown
Raw Normal View History

# Asio TCP echo server example
Simple Asio TCP echo server using WiFi STA or Ethernet.
## Example workflow
- Wi-Fi or Ethernet connection is established, and IP address is obtained.
- Asio TCP server is started on port number defined through the project configuration.
- Server receives and echoes back messages transmitted from client.
## Running the example
- Open the project configuration menu (`idf.py menuconfig`) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
- Set server port number in menuconfig, "Example configuration".
- Run `idf.py -p PORT flash monitor` to build and upload the example to your board and connect to it's serial terminal.
- Wait for the board to connect to WiFi or Ethernet (note the IP address).
- You can now send a TCP message and check it is repeated, for example using netcat `nc IP PORT`.
See the README.md file in the upper level 'examples' directory for more information about examples.