esp-idf/components/hal/esp32s3/touch_sensor_hal.c

177 lines
5.9 KiB
C
Raw Normal View History

2021-09-14 02:36:18 -04:00
/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
2021-09-14 02:36:18 -04:00
*
* SPDX-License-Identifier: Apache-2.0
*/
// The HAL layer for Touch Sensor (common part)
#include "soc/soc_pins.h"
#include "hal/touch_sensor_hal.h"
#include "hal/touch_sensor_types.h"
#include "soc/soc_caps.h"
static int s_sleep_cycle = -1;
static int s_meas_times = -1;
void touch_hal_init(void)
{
touch_ll_stop_fsm();
touch_ll_intr_disable(TOUCH_PAD_INTR_MASK_ALL);
touch_ll_intr_clear(TOUCH_PAD_INTR_MASK_ALL);
touch_ll_clear_channel_mask(TOUCH_PAD_BIT_MASK_ALL);
touch_ll_clear_trigger_status_mask();
touch_ll_set_meas_times(TOUCH_PAD_MEASURE_CYCLE_DEFAULT);
touch_ll_set_sleep_time(TOUCH_PAD_SLEEP_CYCLE_DEFAULT);
/* Configure the touch-sensor power domain into self-bias since bandgap-bias
* level is different under sleep-mode compared to running-mode. self-bias is
* always on after chip startup. */
touch_ll_sleep_low_power(true);
touch_ll_set_voltage_high(TOUCH_PAD_HIGH_VOLTAGE_THRESHOLD);
touch_ll_set_voltage_low(TOUCH_PAD_LOW_VOLTAGE_THRESHOLD);
touch_ll_set_voltage_attenuation(TOUCH_PAD_ATTEN_VOLTAGE_THRESHOLD);
touch_ll_set_idle_channel_connect(TOUCH_PAD_IDLE_CH_CONNECT_DEFAULT);
/* Clear touch channels to initialize the channel value (benchmark, raw_data).
* Note: Should call it after enable clock gate. */
touch_ll_clkgate(true); // Enable clock gate for touch sensor.
touch_ll_reset_benchmark(TOUCH_PAD_MAX);
touch_ll_sleep_reset_benchmark();
}
void touch_hal_deinit(void)
{
touch_ll_reset_benchmark(TOUCH_PAD_MAX);
touch_ll_sleep_reset_benchmark();
touch_ll_stop_fsm();
touch_ll_clkgate(false);
touch_ll_clear_channel_mask(TOUCH_PAD_BIT_MASK_ALL);
touch_ll_clear_trigger_status_mask();
touch_ll_intr_disable(TOUCH_PAD_INTR_MASK_ALL);
touch_ll_timeout_disable();
touch_ll_waterproof_disable();
touch_ll_denoise_disable();
touch_pad_t prox_pad[SOC_TOUCH_PROXIMITY_CHANNEL_NUM] = {[0 ... (SOC_TOUCH_PROXIMITY_CHANNEL_NUM - 1)] = 0};
touch_ll_proximity_set_channel_num((const touch_pad_t *)prox_pad);
touch_ll_sleep_set_channel_num(0);
touch_ll_sleep_disable_proximity_sensing();
touch_ll_reset(); // Reset the touch sensor FSM.
}
void touch_hal_filter_set_config(const touch_filter_config_t *filter_info)
{
touch_ll_filter_set_filter_mode(filter_info->mode);
touch_ll_filter_set_debounce(filter_info->debounce_cnt);
touch_ll_filter_set_noise_thres(filter_info->noise_thr);
touch_ll_filter_set_jitter_step(filter_info->jitter_step);
touch_ll_filter_set_smooth_mode(filter_info->smh_lvl);
}
void touch_hal_filter_get_config(touch_filter_config_t *filter_info)
{
touch_ll_filter_get_filter_mode(&filter_info->mode);
touch_ll_filter_get_debounce(&filter_info->debounce_cnt);
touch_ll_filter_get_noise_thres(&filter_info->noise_thr);
touch_ll_filter_get_jitter_step(&filter_info->jitter_step);
touch_ll_filter_get_smooth_mode(&filter_info->smh_lvl);
}
void touch_hal_denoise_set_config(const touch_pad_denoise_t *denoise)
{
touch_ll_denoise_set_cap_level(denoise->cap_level);
touch_ll_denoise_set_grade(denoise->grade);
}
void touch_hal_denoise_get_config(touch_pad_denoise_t *denoise)
{
touch_ll_denoise_get_cap_level(&denoise->cap_level);
touch_ll_denoise_get_grade(&denoise->grade);
}
void touch_hal_denoise_enable(void)
{
touch_ll_clear_channel_mask(1U << SOC_TOUCH_DENOISE_CHANNEL);
touch_ll_denoise_enable();
}
void touch_hal_waterproof_set_config(const touch_pad_waterproof_t *waterproof)
{
touch_ll_waterproof_set_guard_pad(waterproof->guard_ring_pad);
touch_ll_waterproof_set_sheild_driver(waterproof->shield_driver);
}
void touch_hal_waterproof_get_config(touch_pad_waterproof_t *waterproof)
{
touch_ll_waterproof_get_guard_pad(&waterproof->guard_ring_pad);
touch_ll_waterproof_get_sheild_driver(&waterproof->shield_driver);
}
void touch_hal_waterproof_enable(void)
{
touch_ll_clear_channel_mask(1U << SOC_TOUCH_SHIELD_CHANNEL);
touch_ll_waterproof_enable();
}
bool touch_hal_enable_proximity(touch_pad_t touch_num, bool enabled)
{
int i = 0;
touch_pad_t ch_num[SOC_TOUCH_PROXIMITY_CHANNEL_NUM] = {0};
touch_ll_proximity_get_channel_num(ch_num);
if (enabled) {
for (i = 0; i < SOC_TOUCH_PROXIMITY_CHANNEL_NUM; i++) {
if (ch_num[i] == TOUCH_PAD_NUM0 || ch_num[i] >= TOUCH_PAD_MAX || ch_num[i] == touch_num) {
ch_num[i] = touch_num;
break;
}
}
if (i == SOC_TOUCH_PROXIMITY_CHANNEL_NUM) {
return false;
}
} else {
for (i = 0; i < SOC_TOUCH_PROXIMITY_CHANNEL_NUM; i++) {
if (ch_num[i] == touch_num) {
ch_num[i] = TOUCH_PAD_NUM0;
break;
}
}
}
touch_ll_proximity_set_channel_num(ch_num);
return true;
}
void touch_hal_sleep_channel_enable(touch_pad_t pad_num, bool enable)
{
if (enable) {
touch_ll_sleep_set_channel_num(pad_num);
touch_ll_sleep_set_threshold(TOUCH_PAD_THRESHOLD_MAX);
touch_ll_sleep_reset_benchmark();
} else {
touch_ll_sleep_set_channel_num(TOUCH_PAD_NUM0);
}
}
void touch_hal_sleep_channel_get_config(touch_pad_sleep_channel_t *slp_config)
{
touch_ll_sleep_get_channel_num(&slp_config->touch_num);
slp_config->en_proximity = touch_ll_sleep_is_proximity_enabled();
}
void touch_hal_sleep_channel_set_work_time(uint16_t sleep_cycle, uint16_t meas_times)
{
s_sleep_cycle = (int)sleep_cycle;
s_meas_times = (int)meas_times;
}
void touch_hal_sleep_channel_get_work_time(uint16_t *sleep_cycle, uint16_t *meas_times)
{
if (s_meas_times < 0) {
touch_ll_get_measure_times(meas_times);
} else {
*meas_times = (uint16_t)s_meas_times;
}
if (s_sleep_cycle < 0) {
touch_ll_get_sleep_time(sleep_cycle);
} else {
*sleep_cycle = (uint16_t)s_sleep_cycle;
}
}