esp-idf/examples/openthread/ot_cli/main/esp_ot_config.h

73 lines
3.2 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: CC0
*
* OpenThread Command Line Example
*
* This example code is in the Public Domain (or CC0 licensed, at your option.)
*
* Unless required by applicable law or agreed to in writing, this
* software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied.
*/
#pragma once
#include "esp_openthread_types.h"
2021-07-09 00:18:41 -04:00
#if CONFIG_IDF_TARGET_ESP32H2
#define ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG() \
{ \
.radio_mode = RADIO_MODE_NATIVE, \
}
#else
#define ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG() \
{ \
.radio_mode = RADIO_MODE_UART_RCP, \
.radio_uart_config = { \
.port = 1, \
.uart_config = \
{ \
.baud_rate = 115200, \
.data_bits = UART_DATA_8_BITS, \
.parity = UART_PARITY_DISABLE, \
.stop_bits = UART_STOP_BITS_1, \
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE, \
.rx_flow_ctrl_thresh = 0, \
.source_clk = UART_SCLK_APB, \
}, \
.rx_pin = 4, \
.tx_pin = 5, \
}, \
}
2021-07-09 00:18:41 -04:00
#endif
2021-07-28 03:32:59 -04:00
#define ESP_OPENTHREAD_DEFAULT_HOST_CONFIG() \
{ \
.host_connection_mode = HOST_CONNECTION_MODE_CLI_UART, \
.host_uart_config = { \
.port = 0, \
.uart_config = \
{ \
.baud_rate = 115200, \
.data_bits = UART_DATA_8_BITS, \
.parity = UART_PARITY_DISABLE, \
.stop_bits = UART_STOP_BITS_1, \
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE, \
.rx_flow_ctrl_thresh = 0, \
.source_clk = UART_SCLK_APB, \
}, \
.rx_pin = UART_PIN_NO_CHANGE, \
.tx_pin = UART_PIN_NO_CHANGE, \
}, \
}
#define ESP_OPENTHREAD_DEFAULT_PORT_CONFIG() \
{ \
.storage_partition_name = "ot_storage", \
.netif_queue_size = 10, \
.task_queue_size = 10, \
}