esp-idf/examples/mesh/manual_networking/main/Kconfig.projbuild

menu "Example Configuration"

config MESH_CHANNEL
    int "channel"
    range 1 14
    default 1
    help
        mesh network channel.

config MESH_ROUTER_SSID
    string "Router SSID"
        default "ROUTER_SSID"
        help
            Router SSID.

config MESH_ROUTER_PASSWD
    string "Router password"
        default "ROUTER_PASSWD"
        help
            Router password.

choice
    bool "Mesh AP Authentication Mode"
        default WIFI_AUTH_WPA2_PSK
        help
            Authentication mode.

config WIFI_AUTH_OPEN
    bool "WIFI_AUTH_OPEN"
config WIFI_AUTH_WPA_PSK
    bool "WIFI_AUTH_WPA_PSK"
config WIFI_AUTH_WPA2_PSK
    bool "WIFI_AUTH_WPA2_PSK"
config WIFI_AUTH_WPA_WPA2_PSK
    bool "WIFI_AUTH_WPA_WPA2_PSK"
endchoice

config MESH_AP_AUTHMODE
    int
        default 0 if WIFI_AUTH_OPEN
        default 2 if WIFI_AUTH_WPA_PSK
        default 3 if WIFI_AUTH_WPA2_PSK
        default 4 if WIFI_AUTH_WPA_WPA2_PSK
        help
            Mesh AP authentication mode.

config MESH_AP_PASSWD
    string "Mesh AP Password"
        default "MAP_PASSWD"
        help
            Mesh AP password.

config MESH_AP_CONNECTIONS
    int "Mesh AP Connections"
        range 1 10
        default 6
        help
            The number of stations allowed to connect in.

config MESH_MAX_LAYER
    int "Mesh Max Layer"
        range 1 15
        default 6
        help
            Max layer allowed in mesh network.

config MESH_ROUTE_TABLE_SIZE
    int "Mesh Routing Table Size"
        range 1 300
        default 50
        help
            The number of devices over the network(max: 300).

config MESH_PARENT_SSID
    string "Parent SSID"
        default "PARENT_SSID"
        help
            Parent SSID.
endmenu
mesh: add manual networking function 1. add mesh_assoc_t to esp_mesh_internal.h file. 2. rename "node" to "device" in esp_mesh.h. 3. add MESH_EVENT_SCAN_DONE event. 4. add APIs esp_mesh_scan_get_ap_record() and esp_mesh_scan_get_ap_ie_len() to get scan results. 5. modify API esp_mesh_set_self_organized() by adding parameter "select_parent". 6. modify API esp_mesh_set_parent() by adding parameter "parent_mesh_id" 7. add manual networking example. 2018-05-21 05:22:04 -04:00			`menu "Example Configuration"`

			`config MESH_CHANNEL`
			`int "channel"`
			`range 1 14`
			`default 1`
			`help`
			`mesh network channel.`

			`config MESH_ROUTER_SSID`
			`string "Router SSID"`
			`default "ROUTER_SSID"`
			`help`
			`Router SSID.`

			`config MESH_ROUTER_PASSWD`
			`string "Router password"`
			`default "ROUTER_PASSWD"`
			`help`
			`Router password.`

			`choice`
			`bool "Mesh AP Authentication Mode"`
mesh: bugfix and add two APIs 1. new APIs: esp_mesh_get_subnet_nodes_num() and esp_mesh_get_subnet_nodes_list(). 2. fix hard to find the parent during connect. 3. disable Wi-Fi channel switch function. 4. fix a typo of MESH_EVENT_NO_PARENT_FOUND. 2018-08-27 03:08:54 -04:00			`default WIFI_AUTH_WPA2_PSK`
mesh: add manual networking function 1. add mesh_assoc_t to esp_mesh_internal.h file. 2. rename "node" to "device" in esp_mesh.h. 3. add MESH_EVENT_SCAN_DONE event. 4. add APIs esp_mesh_scan_get_ap_record() and esp_mesh_scan_get_ap_ie_len() to get scan results. 5. modify API esp_mesh_set_self_organized() by adding parameter "select_parent". 6. modify API esp_mesh_set_parent() by adding parameter "parent_mesh_id" 7. add manual networking example. 2018-05-21 05:22:04 -04:00			`help`
			`Authentication mode.`

			`config WIFI_AUTH_OPEN`
			`bool "WIFI_AUTH_OPEN"`
			`config WIFI_AUTH_WPA_PSK`
			`bool "WIFI_AUTH_WPA_PSK"`
			`config WIFI_AUTH_WPA2_PSK`
			`bool "WIFI_AUTH_WPA2_PSK"`
			`config WIFI_AUTH_WPA_WPA2_PSK`
			`bool "WIFI_AUTH_WPA_WPA2_PSK"`
			`endchoice`

			`config MESH_AP_AUTHMODE`
			`int`
			`default 0 if WIFI_AUTH_OPEN`
			`default 2 if WIFI_AUTH_WPA_PSK`
			`default 3 if WIFI_AUTH_WPA2_PSK`
			`default 4 if WIFI_AUTH_WPA_WPA2_PSK`
			`help`
			`Mesh AP authentication mode.`

			`config MESH_AP_PASSWD`
			`string "Mesh AP Password"`
			`default "MAP_PASSWD"`
			`help`
			`Mesh AP password.`

			`config MESH_AP_CONNECTIONS`
			`int "Mesh AP Connections"`
			`range 1 10`
			`default 6`
			`help`
			`The number of stations allowed to connect in.`

			`config MESH_MAX_LAYER`
			`int "Mesh Max Layer"`
			`range 1 15`
			`default 6`
			`help`
			`Max layer allowed in mesh network.`

			`config MESH_ROUTE_TABLE_SIZE`
			`int "Mesh Routing Table Size"`
			`range 1 300`
			`default 50`
			`help`
			`The number of devices over the network(max: 300).`

			`config MESH_PARENT_SSID`
			`string "Parent SSID"`
			`default "PARENT_SSID"`
			`help`
			`Parent SSID.`
			`endmenu`