esp-idf/examples/openthread/ot_rcp/main/esp_ot_config.h

116 lines
5.2 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: CC0-1.0
*
* OpenThread Radio Co-Processor (RCP) Example
*
* This example code is in the Public Domain (or CC0 licensed, at your option.)
*
* Unless required by applicable law or agreed to in writing, this
* software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied.
*/
2021-07-28 03:32:59 -04:00
#pragma once
#if CONFIG_EXTERNAL_COEX_ENABLE
#include "esp_coexist.h"
#endif
2021-07-28 03:32:59 -04:00
#include "esp_openthread_types.h"
#define ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG() \
{ \
.radio_mode = RADIO_MODE_NATIVE, \
}
#if CONFIG_OPENTHREAD_RCP_UART
#if CONFIG_OPENTHREAD_UART_PIN_MANUAL
#define OPENTHREAD_RCP_UART_RX_PIN CONFIG_OPENTHREAD_UART_RX_PIN
#define OPENTHREAD_RCP_UART_TX_PIN CONFIG_OPENTHREAD_UART_TX_PIN
#else
#define OPENTHREAD_RCP_UART_RX_PIN UART_PIN_NO_CHANGE
#define OPENTHREAD_RCP_UART_TX_PIN UART_PIN_NO_CHANGE
#endif
2021-07-28 03:32:59 -04:00
#define ESP_OPENTHREAD_DEFAULT_HOST_CONFIG() \
{ \
.host_connection_mode = HOST_CONNECTION_MODE_RCP_UART, \
.host_uart_config = { \
.port = 0, \
.uart_config = \
{ \
.baud_rate = 460800, \
2021-07-28 03:32:59 -04:00
.data_bits = UART_DATA_8_BITS, \
.parity = UART_PARITY_DISABLE, \
.stop_bits = UART_STOP_BITS_1, \
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE, \
.rx_flow_ctrl_thresh = 0, \
.source_clk = UART_SCLK_DEFAULT, \
2021-07-28 03:32:59 -04:00
}, \
.rx_pin = OPENTHREAD_RCP_UART_RX_PIN, \
.tx_pin = OPENTHREAD_RCP_UART_TX_PIN, \
2021-07-28 03:32:59 -04:00
}, \
}
#else // CONFIG_OPENTHREAD_RCP_SPI
#define ESP_OPENTHREAD_DEFAULT_HOST_CONFIG() \
{ \
.host_connection_mode = HOST_CONNECTION_MODE_RCP_SPI, \
.spi_slave_config = { \
.host_device = SPI2_HOST, \
.bus_config = { \
.mosi_io_num = 3, \
.miso_io_num = 1, \
.sclk_io_num = 0, \
.quadhd_io_num = -1, \
.quadwp_io_num = -1, \
.isr_cpu_id = INTR_CPU_ID_0, \
}, \
.slave_config = { \
.mode = 0, \
.spics_io_num = 2, \
.queue_size = 3, \
.flags = 0, \
}, \
.intr_pin = 9, \
}, \
}
#endif
2021-07-28 03:32:59 -04:00
#define ESP_OPENTHREAD_DEFAULT_PORT_CONFIG() \
{ \
.storage_partition_name = "nvs", \
2021-07-28 03:32:59 -04:00
.netif_queue_size = 10, \
.task_queue_size = 10, \
}
#if CONFIG_EXTERNAL_COEX_ENABLE
#if CONFIG_EXTERNAL_COEX_WIRE_TYPE == EXTERNAL_COEXIST_WIRE_1
#define ESP_OPENTHREAD_DEFAULT_EXTERNAL_COEX_CONFIG() \
{ \
.request = CONFIG_EXTERNAL_COEX_REQUEST_PIN, \
}
#elif CONFIG_EXTERNAL_COEX_WIRE_TYPE == EXTERNAL_COEXIST_WIRE_2
#define ESP_OPENTHREAD_DEFAULT_EXTERNAL_COEX_CONFIG() \
{ \
.request = CONFIG_EXTERNAL_COEX_REQUEST_PIN, \
.grant = CONFIG_EXTERNAL_COEX_GRANT_PIN, \
}
#elif CONFIG_EXTERNAL_COEX_WIRE_TYPE == EXTERNAL_COEXIST_WIRE_3
#define ESP_OPENTHREAD_DEFAULT_EXTERNAL_COEX_CONFIG() \
{ \
.request = CONFIG_EXTERNAL_COEX_REQUEST_PIN, \
.priority = CONFIG_EXTERNAL_COEX_PRIORITY_PIN, \
.grant = CONFIG_EXTERNAL_COEX_GRANT_PIN, \
}
#elif CONFIG_EXTERNAL_COEX_WIRE_TYPE == EXTERNAL_COEXIST_WIRE_4
#define ESP_OPENTHREAD_DEFAULT_EXTERNAL_COEX_CONFIG() \
{ \
.request = CONFIG_EXTERNAL_COEX_REQUEST_PIN, \
.priority = CONFIG_EXTERNAL_COEX_PRIORITY_PIN, \
.grant = CONFIG_EXTERNAL_COEX_GRANT_PIN, \
.tx_line = CONFIG_EXTERNAL_COEX_TX_LINE_PIN, \
}
#endif
#endif // CONFIG_EXTERNAL_COEX_ENABLE