mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
124 lines
7.4 KiB
Markdown
124 lines
7.4 KiB
Markdown
|
| Supported Targets | ESP32-P4 |
|
||
|
|
| ----------------- | -------- |
|
||
|
|
|
||
|
|
|
||
|
|
# PPA DSI example
|
||
|
|
|
||
|
|
## Overview
|
||
|
|
|
||
|
|
This example demonstrates how to use the esp_driver_ppa component to process a given image and display it via DSI interface.
|
||
|
|
|
||
|
|
The example used image will be first scaled up, rotated at counter-clockwise direction and rotated back, mirrored and mirror back, and scaled down. Then the image will be blended with a whole red image with less transparency. Next the `ESP32` word will be color-keyed out. Lastly a frame will be filled around the `ESP32`.
|
||
|
|
|
||
|
|
## Usage
|
||
|
|
|
||
|
|
The subsections below give only absolutely necessary information. For full steps to configure ESP-IDF and use it to build and run projects, see [ESP-IDF Getting Started](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#get-started).
|
||
|
|
|
||
|
|
|
||
|
|
### Hardware Required
|
||
|
|
|
||
|
|
This example requires:
|
||
|
|
|
||
|
|
- ILI9881C LCD screen
|
||
|
|
- ESP32P4 devkit
|
||
|
|
|
||
|
|
|
||
|
|
GND
|
||
|
|
┌─────────────────────────────────────────────────────────┐
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
┌───────────────-─────────────┴──────────────────┐ │
|
||
|
|
│ │ ┌──────────┴───────────┐
|
||
|
|
│ │ DSI DATA 1P │ │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ │ │ │
|
||
|
|
│ │ DSI DATA 1N │ │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ ESP32-P4 │ │ │
|
||
|
|
│ │ DSI CLK N │ ILI9881C │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ │ │ │
|
||
|
|
│ │ DSI CLK P │ │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ │ │ │
|
||
|
|
│ │ DSI DATA 0P │ │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ │ │ │
|
||
|
|
│ │ DSI DATA 0N │ │
|
||
|
|
│ ├───────────────────────────┤ │
|
||
|
|
│ │ │ │
|
||
|
|
│ │ └──────────────────────┘
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
│ │
|
||
|
|
└────────────────────────────────────────────────┘
|
||
|
|
|
||
|
|
|
||
|
|
### Set Chip Target
|
||
|
|
|
||
|
|
First of all, your target must be supported by both:
|
||
|
|
|
||
|
|
- **By your ESP-IDF version**: For the full list of supported targets, run:
|
||
|
|
```
|
||
|
|
idf.py --list-targets
|
||
|
|
```
|
||
|
|
- **By this example**: For the full list of supported targets, refer to the supported targets table at the top of this README.
|
||
|
|
|
||
|
|
After you make sure that your target is supported, go to your example project directory and [set the chip target](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/tools/idf-py.html#select-the-target-chip-set-target):
|
||
|
|
|
||
|
|
```
|
||
|
|
idf.py set-target <target>
|
||
|
|
```
|
||
|
|
|
||
|
|
For example, to set esp32-P4 as the chip target, run:
|
||
|
|
|
||
|
|
```
|
||
|
|
idf.py set-target esp32p4
|
||
|
|
```
|
||
|
|
|
||
|
|
|
||
|
|
### Build and Flash
|
||
|
|
|
||
|
|
Execute the following command to build the project, flash it to your development board, and run the monitor tool to view the serial output:
|
||
|
|
|
||
|
|
```
|
||
|
|
idf.py build flash monitor
|
||
|
|
```
|
||
|
|
|
||
|
|
This command can be reduced to `idf.py flash monitor`.
|
||
|
|
|
||
|
|
If the above command fails, check the log on the serial monitor which usually provides information on the possible cause of the issue.
|
||
|
|
|
||
|
|
To exit the serial monitor, use `Ctrl` + `]`.
|
||
|
|
|
||
|
|
|
||
|
|
## Example Output
|
||
|
|
|
||
|
|
If you see the following console output, your example should be running correctly:
|
||
|
|
|
||
|
|
```
|
||
|
|
I (1555) main_task: Calling app_main()
|
||
|
|
I (1555) ili9881c: ID1: 0x98, ID2: 0x81, ID3: 0x5c
|
||
|
|
I (1795) ppa_dsi: JPEG image decoded! Size of the decoded image is: 320px x 240px
|
||
|
|
start srm operations
|
||
|
|
start blend operations
|
||
|
|
start fill operations
|
||
|
|
I (10085) main_task: Returned from app_main()
|
||
|
|
```
|
||
|
|
|
||
|
|
|
||
|
|
## Reference
|
||
|
|
|
||
|
|
- Link to the ESP-IDF feature's API reference, for example [ESP-IDF: Pixel-Processing Accelerator](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/ppa.html)
|
||
|
|
- [ESP-IDF Getting Started](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#get-started)
|
||
|
|
- [Project Configuration](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html) (Kconfig Options)
|